Foxconn 661GX7MJ Series User manual

This manual is the intellectual property of Foxconn, Inc. Although the

information in this manual may be changed or modified at any time,

Foxconn does not obligate itself to inform the user of these changes.

Statement:

All trademarks are the property of their respective owners.

User’s Manual V1.0 for 661FX7MJ/661GX7MJ series motherboard.

Symbol description:

Note: refers to important information that can help you to use motherboard

better.

Attention: indicates that it may damage hardware or cause data loss,

and tells you how to avoid such problems.

Warning: means that a potential risk of property damage or physical

injury exists.

More information:

If you want more information about our products, please visit Foxconn’s

website: http://www.foxconnchannel.com

Version:

Trademark:

PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ Æ www.fineprint.com.cn

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard

661FX7MJ/661GX7MJ series

is in conformity with

(reference to the specification under which conformity is declared in

accordance with 89/336 EEC-EMC Directive)

þ EN 55022: 1998/A2: 2003Limits and methods of measurements of radio disturbance

characteristics of information technology equipment

þ EN 61000-3-2: 2000 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits for harmonic current emissions

(equipment input current <= 16A per phase)

þ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits of voltage fluctuations and flicker in low-voltage

supply systems for equipment with rated current <= 16A

þ EN 55024: 1998/A2:2003Information technology equipment-Immunity characteristics limits

and methods of measurement

Signature : Place / Date : TAIPEI/2006

Printed Name : James Liang Position/ Title : Assistant President

PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn

Declaration of conformity

Trade Name: Foxconn

Model Name: 661FX7MJ/661GX7MJ

Responsible Party: PCE Industry Inc.

Address: 458 E. Lambert Rd.

Fullerton, CA 92835

Telephone: 714-738-8868

Facsimile: 714-738-8838

Equipment Classification: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions : (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Tested to comply with FCC standards.

Signature : Date : 2006

PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn

Product Introduction

Main Features............................................................................................2

Motherboard Layout...................................................................................4

Rear Panel Connectors...............................................................................5

Installation Instructions

CPU............................................................................................................8

Memory....................................................................................................11

Power Supply..........................................................................................12

Other Connectors.....................................................................................13

Expansion Slots........................................................................................17

Jumpers...................................................................................................18

BIOS Description

Enter BIOS Setup......................................................................................22

Main Menu................................................................................................22

Standard CMOS Features.........................................................................24

BIOS Features..........................................................................................26

Advanced BIOS Features.........................................................................27

Advanced Chipset Features.....................................................................31

Integrated Peripherals...............................................................................35

Power Management Setup........................................................................39

PnP/PCI Configurations.............................................................................43

PC Health Status.......................................................................................44

Frequency/Voltage Control.......................................................................45

Load Fail-Safe Defaults............................................................................46

Load Optimized Defaults...........................................................................46

Set Supervisor/User Password................................................................46

Save & Exit Setup.....................................................................................47

Exit Without Saving...................................................................................47

Table of Contents

Chapter

1

Chapter 2

Chapter

3

PDF 文件使用 "pdfFactory" 试用版本创建 æ ÿ æ www.fineprint.com.cn

Driver CD Introduction

Utility CD content......................................................................................49

Start to install drivers................................................................................50

Table of Contents

4

Chapter

Directions for Bundled Software

SuperStep................................................................................................52

SuperUpdate............................................................................................55

5

Chapter

SuperLogo...............................................................................................60

Special BIOS Functions

SuperBoot................................................................................................63

SuperBIOS-Protect...................................................................................64

SuperSpeed.............................................................................................65

SuperRecovery........................................................................................66

6

Chapter

PDF 文件使用 "pdfFactory" 试用版本创建 æ æ www.fineprint.com.cn

1.Attach the CPU and heatsink using silica gel to ensure full contact.

2.It is suggested to select high-quality, certified fans in order to avoid

damage to the motherboard and CPU due to high temperatures.

3.Never turn on the machine if the CPU fan is not properly installed.

4.Ensure that the DC power supply is turned off before inserting or

removing expansion cards or other peripherals, especially when

you insert or remove a memory module. Failure to switch off the DC

power supply may result in serious damage to your system or

memory module.

We cannot guarantee that your system will operate normally while

over-clocked. Normal operation depends on the over-clock capacity of

your device.

Attention:

Since BIOS programs are upgraded from time to time, the BIOS de-

scription in this manual is just for reference. We do not guarantee that

the content of this manual will remain consistent with the actual BIOS

version at any given time in the future.

Attention:

The pictures of objects used in this manual are just for your reference.

Please refer to the physical motherboard.

Attention:

PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn

This manual is suitable for motherboard of 661FX7MJ/

661GX7MJ series. Each motherboard is carefully designed

for the PC user who wants diverse features.

-L with onboard 10/100M LAN(Default is elliptical)

-Kwith onboard Gigabit LAN

-6with 6-channel audio(Default is elliptical)

-8with 8-channel audio

-Ewith 1394 function

-Swith SATA function

-Rwith RAID function

-2with DDR2 function

You can find PPID label on the motherboard. It indicates the

functions that the motherboard has.

For example:

On the black mark of the PPID label, it means the motherboard

supports 6-Channel Audio (-6),1394 function (-E), onboard 10/

100M LAN (-L), SATA function (-S).

PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn

Chapter

Thank you for buying Foxconn’s 661FX7MJ/661GX7MJ

series motherboard. This series of motherboard is one of

our new products and offers superior performance, reliabil-

ity and quality, at a reasonable price. This motherboard adopts

the advanced SiS 661FX/661GX + 964/964L chipset, provid-

ing users a computer platform with a high integration-com-

patibility-performance price ratio.

This chapter includes the following information:

v Main Features

v Motherboard Layout

v Rear Panel Connectors

1

PDF 文件使用 "pdfFactory" 试用版本创建 × ÿ × www.fineprint.com.cn

Chapter 1 Product Introduction

2

Main Features

Size

· mATX form factor of 9.6” x 8.3”

Microprocessor

· Supports Intel

®

Pentium

®

D/Pentium

®

4 /Celeron

®

D processor in an LGA775

package

· SiS 661FX7MJ supports FSB at 533MHz/800MHz

· SiS 661GX7MJ supports FSB at 533MHz

Chipset

· 661FX7MJ Series: SiS661FX (North Bridge) + SiS 964/964L (South Bridge)

· 661GX7MJ Series: SiS 661GX (North Bridge) + SiS 964/964L (South Bridge)

System Memory

· Two 184-pin DIMM slots

· Supports PC 3200/PC 2700/PC 2100 memory

· Supports 128 Mb/256 Mb/512 Mb/1 Gb technology up to 2GB

USB 2.0 Ports

· Supports hot plug

· Eight USB 2.0 ports (four rear panel ports, two onboard USB header providing

four extra ports)

· Supports USB 2.0 protocol up to 480 Mbps transmission rate

Onboard Serial ATA (optional)

· 150MBps transfer rate

· Supports two S-ATA devices, such as HDD, etc

· Supports RAID 0, RAID 1, JBOD(supported on 964)

PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn

3

Chapter 1 Product Introduction

Onboard LAN (-L)

· Supports 10/100M Ethernet

· LAN interface built-in on board

AGP 8X

· AGP 8X (AGP 3.0) is the VGA interface specification that enabled enhanced

graphics performance with high bandwidth speeds up to 2.1GB/s

Onboard Audio (-6)

· AC’ 97 2.3 Specification Compliant

· Onboard Line-in jack, Microphone jack, Line-out jack

· Supports 6-channel audio (setting via software)

Expansion Slots

· Three PCI slots

· One AGP slot

BIOS

· Licensed advanced AWARD (Phoenix) BIOS, supports flash ROM, plug-and-

play ready

· Supports HDD, CD-ROM or USB device boot up

Green Function

· Supports ACPI (Advanced Configuration and Power Interface)

· Supports S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4

(suspend to disk – depends on OS) and S5 (soft-off)

Advanced Features

· PCI 2.3 Specification Compliant

·Supports Windows 98/2000/ME/XP soft-off

· Supports PC Health function (capable of monitoring system voltage, CPU

temperature, system temperature and fan speed)

PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn

Chapter 1 Product Introduction

4

Motherboard Layout

1. CD_IN Connector

2. Front Audio Connector

3. PCI Slots

4. FWH/LPC Connector(optional)

5. BIOS TBL_EN Connecor

6. IrDA Header

7. SPI Connector(optional)

8. COM2 Connector

9. S/PDIF OUT Connector

10. FDD Connector

11. South Bridge: SiS 964/964L

12. Front USB Connectors

13. Speaker Connector(optional)

14. Chassis Intruder Connector

15.Front Panel Connector

16. System Fan Connector

17. Clear CMOS Jumper

18. SATA Connector(optional)

19. HDD Connector

20. 20-pin ATX Power Connector

21. Memory Slots

22. North Bridge: SiS 661FX/661GX

23. CPU Socket

24. AGP 8X Slot

25. AUX_IN Connector(optional)

26. 4-pin ATX 12V Power Connector

27.CPU FAN Connector

Note:

The above motherboard layout is provided for reference only;

please refer to the physical motherboard.

123456

7

8

9

10

11

12

13

14

15 16

17

18 19

20

21

22

23

24

25

26

27

PDF 文件使用 "pdfFactory" 试用版本创建 Æ ÿ Æ www.fineprint.com.cn

5

Chapter 1 Product Introduction

USB 2.0 Ports

PS/2 Mouse

Connector

Parallel Port

(Printer Port)

LAN Connector

Line-in jack

Line-out jack

Microphone jack

1

2

4

6

7

8

PS/2 Keyboard

Connector

Serial Port

(COM1)

3

VGA Port

5

Rear Panel Connectors

This motherboard provides the ports as below:

Line-in jack, Line-out jack, Microphone jack

When using a 6-Channel sound source, connect the front speaker to the green

audio output; connect the surround sound speaker to the blue audio output; con-

nect the center speaker/subwoofer to the red Microphone output.

8

PDF 文件使用 "pdfFactory" 试用版本创建 ÿ www.fineprint.com.cn

Chapter 2 Installation Instructions

6

This chapter introduces the hardware installation process,

including the installation of the CPU and memory. It also

addresses the connection of your power supply, connection

of hard drive and floppy drive data cables, and setting up

various other feature of the motherboard. Caution should be

exercised during the installation process. Please refer to

the motherboard layout prior to any installation and read

the contents in this chapter carefully.

This chapter includes the following information:

v CPU

v Memory

v Power Supply

v Other Connectors

v Expansion Slots

v Jumpers

Chapter

2

PDF 文件使用 "pdfFactory" 试用版本创建 × ÿ × www.fineprint.com.cn

7

Chapter 2 Installation Instructions

Notes:

Take note of the following precautions before you install compo-

nents or change settings.

1.Use a grounded wrist strap or touch a safely grounded object,

such as an attached power supply, beforehandling compo-

nents to avoid damaging them due to static electricity.

2.Unplug the power cord before opening your chassis or touching

any component.

3.Hold components by their edges to avoid touching any exposed

integrated circuits (ICs).

4.Whenever you uninstall a component, place it on a grounded

anti-static pad or into anti-static bag that it came in.

PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn

Chapter 2 Installation Instructions

8

CPU

This motherboard supports Intel

®

Pentium

®

D/ Pentium

®

4/Celeron

®

D Proces-

sors in an LGA775 package .

Installation of CPU

Below is the CPU socket illustration. Follow these procedures to install a CPU.

Load lever

Load stiffener

Load plate

Protective cover

1. Use thumb and forefinger to hold the hook of the load lever and pull the lever

down and away from socket to unlock it. Lift the load lever.

2. Push down the rear tab with your forefinger to bring the front end of the load

plate up slightly. Open the load plate with thumb. Be careful not to touch the

contacts.

PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn

9

Chapter 2 Installation Instructions

3. Hold CPU with thumb and forefinger. Ensure fingers align to socket cutouts.

Match the CPU triangle marker to Pin 1 position as shown below. The alignment

key also provides the orientation directed function. Lower the CPU straight down

without tilting or sliding the CPU in the socket.

4. After installing the CPU, remove the protective cover from load plate. The

protective cover is used to protect the contacts of the socket. Do not discard the

protective cover. Always replace the socket cover if the CPU is removed from the

socket.

Alignment Key

Socket Cutouts

Pin 1 position

PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ Æ www.fineprint.com.cn

Chapter 2 Installation Instructions

10

5. Close the load plate, and slightly push down the tongue side.

6. Lower the lever and lock it to the load plate, then the CPU is locked completely.

Note :

Excessive temperatures will severely damage the CPU and

system. Therefore, you should install CPU cooling fan and make

sure that the cooling fan works normally at all times in order to

prevent overheating and damaging to the CPU. Please refer to your

CPU fan user guide to install it properly.

For more detailed information about CPU Qualified Vendor List, please visit our

website:http://www.foxconnchannel.comFo

PDF 文件使用 "pdfFactory" 试用版本创建 Æ ÿ Æ www.fineprint.com.cn

11

Chapter 2 Installation Instructions

Memory

This motherboard includes two 184-pin slots Memory sockets. You must in-

stall at least one memory module to ensure normal operation. If you install two

modules, they must be the same speed. Mixed memory modules from different

manufacturers is not recommended.

Installation of DDR Memory

1.There is only one gap in the center of the DIMM socket, and the memory

module can be fixed in one direction only. Unlock a DIMM socket by pressing

the module clips outward.

2.Align the memory module to the DIMM socket and insert the module verti-

cally into the DIMM socket.

3.The plastic clips at both sides of the DIMM socket will lock automatically.

104

Pins

80

Pins

For more detailed information about Memory Qualified Vendor List, please vist

our website:http://www.foxconnchannel.com

Warning :

Be sure to unplug the AC power supply before adding or

removing expansion cards or other system peripherals, es-

pecially the memory devices, otherwise your motherboard

PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn

Chapter 2 Installation Instructions

12

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any

devices, make sure that they have been installed properly prior to connecting the

power supply.

4-pin ATX_12V Power Connector: PWR2

The ATX power supply connects to PWR2

and provides power to the CPU.

20-pin ATX power connector: PWR1

PWR1 is the ATX power supply connector.

Make sure that the power supply cable and

pins are properly aligned with the connector

on the motherboard. Firmly plug the power

supply cable into the connector and make

sure it is secure.

4-pin ATX_12V power connector

GND

12V

3

1

4

2

12V

20-pin ATX power connector

1

11

3.3V

-12V

GND

-5V

5V

GND

PS-ON

GND

5V

10

20

3.3V

5V

12V

5V

PWR-OK

3.3V

GND

5VSB

PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn

13

Chapter 2 Installation Instructions

Other Connectors

This motherboard includes connectors for FDD devices, IDE HDD devices, USB

devices, IR module, CPU fan, system fan and others.

FLOPPY Connector

This motherboard includes a standard FDD connector, supporting 360K, 720K,

1.2M, 1.44M, and 2.88M FDDs.

HDD connectors: PIDE & SIDE

This connectors supports the Ultra DMA 133/100/66 IDE hard disk ribbon

cable. Connect the cable’s blue connector to the primary (recommended) or sec-

ondary IDE connector, then connect the gray connector to the Ultra DMA 133/

100/66 slave device (hard disk drive) and the black connector to the Ultra DMA

133/100/66 master device. If you install two hard disks, you must configure the

second drive as a slave device by setting its jumper accordingly. Refer to the hard

disk documentation for the jumper settings.

Attention:

Ribbon cables are directional, therefore, make sure to

always connect with the cable on the same side as pin 1 of the

PIDE/SIDE or FDD connector on the motherboard.

PDF 文件使用 "pdfFactory" 试用版本创建 ³ ³ www.fineprint.com.cn

Page is loading ...

Foxconn 661GX7MJ Series User manual

This manual is also suitable for

Foxconn 661GX7MJ Series User manual

Related papers

Other documents