Eaton COOPER POWER SERIES Installation Instructions Manual

Brand: Eaton

Model: COOPER POWER SERIES

Type: Installation Instructions Manual

Eaton COOPER POWER SERIES provides safe and efficient operation of high-voltage lines and equipment with its modern safety features, including proper insulation, protective gear, and hazard prevention components. It's designed to meet industry standards, helping users to ensure the safety of their personnel and the integrity of their electrical systems.

DRC250 Plug-In receptacle cap installation instructions

COOPER POWER

SERIES

Connectors

MN650029EN

Effective November 2016

Supersedes August 2006 (IS550-13-1)

iINSTALLATION INSTRUCTIONS MN650029EN November 2016

DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY

The information, recommendations, descriptions and safety notations in this document are based on Eaton Corporation’s

(“Eaton”) experience and judgment and may not cover all contingencies. If further information is required, an Eaton sales

office should be consulted. Sale of the product shown in this literature is subject to the terms and conditions outlined in

appropriate Eaton selling policies or other contractual agreement between Eaton and the purchaser.

THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES

OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY

EXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON. THE

CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES.

In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or other-wise

for any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited to damage or loss

of use of equipment, plant or power system, cost of capital, loss of power, additional expenses in the use of existing power

facilities, or claims against the purchaser or user by its customers resulting from the use of the information, recommendations

and descriptions contained herein. The information contained in this manual is subject to change without notice.

ii INSTALLATION INSTRUCTIONS MN650029EN November 2016

Contents

DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY ....................................I

SAFETY FOR LIFE .........................................................................III

SAFETY INFORMATION ....................................................................III

Safety instructions .............................................................................. iii

INSTALLATION PROCEDURE ................................................................ 1

iiiINSTALLATION INSTRUCTIONS MN650029EN November 2016

Safety for life

SAFETY

FOR LIFE

SAFETY

FOR LIFE

Eaton’s Cooper Power series products meet or exceed all applicable industry standards relating to product safety. We

actively promote safe practices in the use and maintenance of our products through our service literature, instructional

training programs, and the continuous efforts of all Eaton employees involved in product design, manufacture, marketing

and service.

We strongly urge that you always follow all locally approved safety procedures and safety instructions when working around

high-voltage lines and equipment and support our “Safety For Life” mission.

The instructions in this manual are not intended as a

substitute for proper training or adequate experience in the

safe operation of the equipment described. Only competent

technicians, who are familiar with this equipment should

install, operate and service it.

A competent technician has these qualifications:

• Is thoroughly familiar with these instructions.

• Is trained in industry-accepted high- and low-voltage safe

operating practices and procedures.

• Is trained and authorized to energize, de-energize, clear,

and ground power distribution equipment.

• Is trained in the care and use of protective equipment

such as flash clothing, safety glasses, face shield, hard

hat, rubber gloves, clampstick, hotstick, etc.

Following is important safety information. For safe

installation and operation of this equipment, be sure to read

and understand all cautions and warnings.

Safety instructions

Following are general caution and warning statements that

apply to this equipment. Additional statements, related

to specific tasks and procedures, are located throughout

themanual.

Safety information

DANGER

Hazardous voltage. Contact with high voltage will

cause death or severe personal injury. Follow all locally

approved safety procedures when working around

high- and low-voltage lines and equipment.

WARNING

Before installing, operating, maintaining, or testing this

equipment, carefully read and understand the contents

of this manual. Improper operation, handling or

maintenance can result in death, severe personal injury,

and equipment damage.

WARNING

This equipment is not intended to protect human

life. Follow all locally approved procedures and safety

practices when installing or operating this equipment.

Failure to comply may result in death, severe personal

injury and equipment damage.

WARNING

Power distribution and transmission equipment must

be properly selected for the intended application. It

must be installed and serviced by competent personnel

who have been trained and understand proper safety

procedures. These instructions are written for such

personnel and are not a substitute for adequate training

and experience in safety procedures. Failure to properly

select, install or maintain power distribution and

transmission equipment can result in death, severe

personal injury, and equipment damage.

This manual may contain four types of hazard statements:

DANGER

Indicates an imminently hazardous situation which, if

not avoided, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

CAUTION

Indicates a potentially hazardous situation which, if not

avoided, may result in equipment damage only.

Hazard Statement Definitions

DRC250 Plug-In receptacle cap installation instructions

INSTALLATION INSTRUCTIONS MN650029EN November 2016

Figure 1. DRC250 Receptacle cap.

ote:N This cap can only be installed or removed when the

equipment is de-energised.

• This protective cap kit includes the following:

– DRC250 receptacle cap

– Bail Assembly

– Plastic Line

– Silicone Lubricant

– Paper Towel

– Installation Instructions

Installation procedure

Step 1

Clean and lubricate the bushing interface, using the supplied

lubricant.

Step 2

Apply a thin layer of the supplied silicone lubricant to the

internal interface of the cap.

Step 3

Insert the plastic line into the cap and push the cap onto the

bushings.

Step 4

Slowly, remove the plastic line while holding the cap on the

bushing.

Step 5

Hook the legs of the bail onto the bail tabs.

Step 6

Tighten the eyebolt of the bail until tight.

Step 7

Attach an earth wire through the hole in the cap to the

earth bus.

DRC250 Plug-In receptacle cap installation instructions

INSTALLATION INSTRUCTIONS MN650029EN November 2016

This page intentionally left blank.

DRC250 Plug-In receptacle cap installation instructions

INSTALLATION INSTRUCTIONS MN650029EN November 2016

This page intentionally left blank.

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

Eaton’s Power Systems Division

2300 Badger Drive

Waukesha, WI 53188

United States

Eaton.com/cooperpowerseries

Printed in USA

Publication No. MN650029EN

November 2016

Eaton is a registered trademark.

All trademarks are property

of their respective owners.

For Eaton's Cooper Power series product

information

call 1-877-277-4636 or visit:

www.eaton.com/cooperpowerseries.

SAFETY

FOR LIFE

Eaton COOPER POWER SERIES Installation Instructions Manual

Eaton COOPER POWER SERIES Installation Instructions Manual

Eaton COOPER POWER SERIES Installation Instructions Manual

Related papers

Other documents