Hummer 2009 Owner's manual

Seats and Restraint System

............................. 1-1

Head Restraints

......................................... 1-2

Front Seats

............................................... 1-4

Rear Seats

.............................................. 1-10

Safety Belts

............................................. 1-20

Child Restraints

....................................... 1-40

Airbag System

......................................... 1-67

Restraint System Check

............................ 1-80

Features and Controls

..................................... 2-1

Keys

........................................................ 2-3

Doors and Locks

...................................... 2-10

Windows

................................................. 2-19

Theft-Deterrent Systems

............................ 2-23

Starting and Operating Your Vehicle

........... 2-27

Mirrors

.................................................... 2-47

Object Detection Systems

.......................... 2-50

OnStar

®

System

...................................... 2-54

Universal Home Remote System

................ 2-57

Storage Areas

......................................... 2-64

Sunroof

.................................................. 2-68

Instrument Panel

............................................. 3-1

Instrument Panel Overview

.......................... 3-4

Climate Controls

...................................... 3-22

Warning Lights, Gages, and Indicators

........ 3-29

Driver Information Center (DIC)

.................. 3-46

Audio System(s)

....................................... 3-72

Driving Your Vehicle

....................................... 4-1

Your Driving, the Road, and the Vehicle

....... 4-2

Towing

................................................... 4-50

Service and Appearance Care

.......................... 5-1

Service

..................................................... 5-3

Fuel

......................................................... 5-5

Checking Things Under the Hood

............... 5-11

Rear Axle

............................................... 5-47

Four-Wheel Drive

..................................... 5-48

Front Axle

............................................... 5-49

Bulb Replacement

.................................... 5-50

Windshield Wiper Blade Replacement

......... 5-56

Tires

...................................................... 5-57

Appearance Care

................................... 5-102

Vehicle Identiﬁcation

............................... 5-109

Electrical System

.................................... 5-109

Capacities and Speciﬁcations

................... 5-117

Maintenance Schedule

..................................... 6-1

Maintenance Schedule

................................ 6-2

Customer Assistance Information

.................... 7-1

Customer Assistance and Information

........... 7-2

Reporting Safety Defects

........................... 7-14

Vehicle Data Recording and Privacy

........... 7-16

Index

................................................................ 1

2009 HUMMER H2 Owner Manual M

GENERAL MOTORS, GM, the GM Emblem, HUMMER,

the name HUMMER, H2 and the H2 Design are

registered trademarks of General Motors Corporation.

This manual includes the latest information at the time it

was printed. GM reserves the right to make changes after

that time without further notice. For vehicles ﬁrst sold in

Canada, substitute the name “General Motors of Canada

Limited” for HUMMER wherever it appears in this manual.

This manual describes features that may or may not be

on your speciﬁc vehicle.

Read this manual from beginning to end to learn about

the vehicle’s features and controls. Pictures, symbols,

and words work together to explain vehicle operation.

Keep this manual in the vehicle for quick reference.

Canadian Owners

A French language copy of this manual can be obtained

from your dealer/retailer or from:

Helm, Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

helminc.com

Propriétaires Canadiens

On peut obtenir un exemplaire de ce guide en français

auprès de concessionnaire ou à l’adresse suivante:

Helm Incorporated

P.O. Box 07130

Detroit, MI 48207

1-800-551-4123

helminc.com

Index

To quickly locate information about the vehicle use the

Index in the back of the manual. It is an alphabetical

list of what is in the manual and the page number where

it can be found.

Litho in U.S.A.

Part No. 15952375 A First Printing

©

ii

Safety Warnings and Symbols

A circle with a slash

through it is a safety

symbol which means

“Do Not,” “Do not do this”

or “Do not let this happen.”

A box with the word CAUTION is used to tell about

things that could hurt you or others if you were to ignore

the warning.

{ CAUTION:

These mean there is something that could hurt

you or other people.

Cautions tell what the hazard is and what to do to avoid

or reduce the hazard. Read these cautions.

A notice tells about something that can damage the

vehicle.

Notice: These mean there is something that could

damage your vehicle.

Many times, this damage would not be covered by the

vehicle’s warranty, and it could be costly. The notice

tells what to do to help avoid the damage.

There are also warning labels on the vehicle which use

the same words, CAUTION or Notice.

Vehicle Symbols

The vehicle has components and labels that use

symbols instead of text. Symbols are shown along

with the text describing the operation or information

relating to a speciﬁc component, control, message,

gage, or indicator.

M : This symbol is shown when you need to see your

owner manual for additional instructions or information.

* : This symbol is shown when you need to see a

service manual for additional instructions or information.

iii

Vehicle Symbol Chart

Here are some additional symbols that may be found on

the vehicle and what they mean. For more information

on the symbol, refer to the index.

9 : Airbag Readiness Light

# : Air Conditioning

! : Antilock Brake System (ABS)

g : Audio Steering Wheel Controls or OnStar

®

$ : Brake System Warning Light

" : Charging System

I : Cruise Control

B : Engine Coolant Temperature

O : Exterior Lamps

# : Fog Lamps

. : Fuel Gage

+ : Fuses

i : Headlamp High/Low-Beam Changer

j : LATCH System Child Restraints

* : Malfunction Indicator Lamp

: : Oil Pressure

} : Power

/ : Remote Vehicle Start

> : Safety Belt Reminders

7 : Tire Pressure Monitor

_ : Tow/Haul Mode

F : Traction Control

M : Windshield Washer Fluid

iv

Head Restraints ...............................................1-2

Front Seats ......................................................1-4

Power Seats ..................................................1-4

Power Lumbar ...............................................1-5

Heated Seats .................................................1-6

Memory Seat and Mirrors ................................1-6

Power Reclining Seatbacks ..............................1-8

Rear Seats .....................................................1-10

Heated Seats ...............................................1-10

Split Folding Rear Seat .................................1-11

Bucket Seats (Reclining Seatbacks) .................1-13

Third Row Seat ............................................1-14

Safety Belts ...................................................1-20

Safety Belts: They Are for Everyone ................1-20

How to Wear Safety Belts Properly .................1-25

Lap-Shoulder Belt .........................................1-34

Safety Belt Use During Pregnancy ..................1-39

Safety Belt Extender .....................................1-39

Child Restraints .............................................1-40

Older Children ..............................................1-40

Infants and Young Children ............................1-43

Child Restraint Systems .................................1-47

Where to Put the Restraint .............................1-50

Lower Anchors and Tethers for

Children (LATCH) ......................................1-51

Securing a Child Restraint in a

Rear Seat Position ....................................1-62

Securing a Child Restraint in the

Right Front Seat Position ............................1-64

Airbag System ...............................................1-67

Where Are the Airbags? ................................1-69

When Should an Airbag Inﬂate? .....................1-72

What Makes an Airbag Inﬂate? .......................1-73

How Does an Airbag Restrain? .......................1-74

What Will You See After an Airbag Inﬂates? .....1-74

Airbag Off Switch ..........................................1-76

Servicing Your Airbag-Equipped Vehicle ...........1-79

Adding Equipment to Your Airbag-Equipped

Vehicle ....................................................1-79

Restraint System Check ..................................1-80

Checking the Restraint Systems ......................1-80

Replacing Restraint System Parts

After a Crash ............................................1-81

Section 1 Seats and Restraint System

1-1

Head Restraints

The front seats have adjustable head restraints in the

outboard seating positions.

{ CAUTION:

With head restraints that are not installed and

adjusted properly, there is a greater chance that

occupants will suffer a neck/spinal injury in a

crash. Do not drive until the head restraints for all

occupants are installed and adjusted properly.

Adjust the head restraint so that the top of the restraint

is at the same height as the top of the occupant’s head.

This position reduces the chance of a neck injury in a

crash.

1-2

Pull the head restraint up to raise it. To lower the head

restraint, press the button, located on the top of the

seatback, and push the restraint down.

Push down on the head restraint after the button is

released to make sure that it is locked in place.

The head restraints are not designed to be removed.

The rear seat has head rests that can be adjusted

up and down.

1-3

Front Seats

Power Seats

On a vehicle with power seats, the controls used to

operate them are located on the outboard side of the

seats. To adjust the seat, do any of the following:

• Move the seat forward or rearward by sliding the

control forward or rearward.

• Raise or lower the front part of the seat cushion by

moving the front of the control up or down.

• Raise or lower the rear part of the seat cushion by

moving the rear of the control up or down.

• Raise or lower the entire seat by moving the entire

control up or down.

On seats with power reclining seatbacks, the control is

located behind the power seat control on the outboard

side of the seats. See “Power Reclining Seatbacks”

under Power Reclining Seatbacks on page 1-8.

A vehicle with a memory function allows seat settings to

be saved and recalled. See Memory Seat and Mirrors

on page 1-6 for more information.

Driver Seat with Power Seat Control, Power Recline,

and Power Lumbar shown

1-4

Power Lumbar

If the seats have power lumbar, the controls used to

operate this feature are located on the outboard side of

the seats.

• To increase lumbar support, press and hold the

front of the control.

• To decrease lumbar support, press and hold the

rear of the control.

• To raise the height of the lumbar support, press

and hold the top of the control.

• To lower the height of the lumbar support, press

and hold the bottom of the control.

Release the control when the lower seatback reaches

the desired level of lumbar support.

The vehicle may have a memory function which allows

seat settings to be saved and recalled. See Memory

Seat and Mirrors on page 1-6 for more information.

Keep in mind that as the seating position changes, as it

may during long trips, so should the position of the

lumbar support. Adjust the seat as needed.

1-5

Heated Seats

On vehicles with heated front seats, the controls are

located on the driver and passenger doors.

I (Heated Seatback): Press to turn on the heated

seatback.

J (Heated Seat and Seatback): Press to turn on the

heated seat and seatback.

The light on the button will come on to indicate that the

feature is working. Press the button to cycle through the

temperature settings of high, medium, and low and to turn

the heat to the seat off. Indicator lights will show the level

of heat selected: three for high, two for medium, and one

for low.

The heated seats will be canceled 10 seconds after the

ignition is turned off. To use the heated seat feature

after restarting the vehicle, press the heated seat

or seatback button again.

Memory Seat and Mirrors

If the vehicle has this feature, the controls for the

memory function are located on the driver door.

1: Saves the seating position for driver 1.

2: Saves the seating position for driver 2.

S : Programs and recalls the easy exit position.

These buttons are used to program and recall memory

settings for the driver seat and both the driver and

passenger outside mirrors. The settings for these

features can be saved for up to two drivers.

1-6

To store the memory settings:

1. While the vehicle is in P (Park), adjust the driver

seat, including the seatback recliner, lumbar, and

side wing area, and both outside mirrors to a

comfortable position.

2. Press and hold button 1 until a double chime

sounds to let you know that the position has

been stored.

A second seating and mirror position can be programmed

by repeating Steps 1 and 2 and pressing button 2.

To recall the memory positions, the vehicle must be in

P (Park). Press and release either button 1 or button 2

corresponding to the desired driving position. A single

chime will sound and the memory position will be

recalled.

To stop recall movement of the memory seat feature at

any time, press one of the memory buttons or power

seat controls.

Easy Exit Seat

To store the seat exit position:

1. Press and release the button 1. The seat will move

to the stored memory position.

2. Adjust the seat to the desired exit position.

3. Press and hold the exit button until a double chime

sounds to let you know that the position has been

stored.

A second seat exit position can be programmed by

repeating Steps 1 through 3 and pressing button 2.

B (Easy Exit Seat): To use the seat exit position:

• Press the exit button on the memory control.

• If this feature is activated in the DIC, removing the

key from the ignition will move the seat to the exit

position.

See “Easy Exit Seat” under DIC Vehicle Customization

on page 3-64 for more information on activating this

feature in the DIC.

1-7

Power Reclining Seatbacks

The front seats have power reclining seatbacks.

The control used to operate the seatbacks is located

on the outboard side of the seats.

• To recline the seatback, press the control toward

the rear of the vehicle.

• To raise the seatback, press the control toward the

front of the vehicle.

{ CAUTION:

Sitting in a reclined position when your vehicle is

in motion can be dangerous. Even if you buckle

up, your safety belts cannot do their job when you

are reclined like this.

The shoulder belt cannot do its job. In a crash,

you could go into it, receiving neck or other

injuries.

CAUTION: (Continued)

1-8

CAUTION: (Continued)

The lap belt cannot do its job either. In a crash the

belt could go up over your abdomen. The belt

forces would be there, not at your pelvic bones.

This could cause serious internal injuries.

For proper protection when the vehicle is in

motion, have the seatback upright. Then sit well

back in the seat and wear your safety belt

properly.

Do not have a seatback reclined if the vehicle is

moving.

1-9

Rear Seats

Heated Seats

On vehicles with rear

outboard heated seats, the

buttons used to control this

feature are located on the

Rear Seat Audio (RSA)

panel.

M (Heated Seat): To heat the seat cushion, press the

button with the heated seat symbol.

A heated seat symbol will be shown in the RSA display to

indicate that the feature is on. Press the button to cycle

through the temperature settings of high, medium, and

low, and to turn it off. Indicator bars next to the symbol

will designate the level of heat selected: three for high,

two for medium, and one for low.

The heated seats are off when the ignition is off.

Driver Side RSA Heated

Seat Button shown

1-10

Split Folding Rear Seat

The split bench and bucket seats can be folded to

provide more cargo space.

Folding the Seatbacks

The seatbacks are equipped with rearward folding head

rests (SUV only). When the seatback is being folded

down, the head rest will automatically fold rearward.

To fold the rear seat:

1. Make sure that nothing is under or in front of

the seat.

2. Pull up on the strap

loop located at the rear

of the seat cushion and

pull the seat cushion up

and fold it forward.

Notice: Folding a rear seat with the safety belts still

fastened may cause damage to the seat or the safety

belts. Always unbuckle the safety belts and return

them to their normal stowed position before folding

a rear seat.

3. Pull the seatback forward and fold it down until it

is ﬂat.

If the seatback cannot fold ﬂat because it interferes

with the cushion, try moving the front seat forward

and/or bringing the front seatback more upright.

4. Repeat the steps for the other half of the split

bench seat.

{ CAUTION:

Using the third row seating position while the

second row is folded, or folded and tumbled, could

cause injury in a sudden stop or crash. Be sure to

return the seat to the passenger seating position.

Push and pull on the seat to make sure it is

locked into place.

1-11

Returning the Seat(s) to an Upright

Position

{ CAUTION:

If either seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

push and pull on the seatbacks to be sure they

are locked.

{ CAUTION:

A safety belt that is improperly routed, not properly

attached, or twisted will not provide the protection

needed in a crash. The person wearing the belt

CAUTION: (Continued)

could be seriously injured. After raising the rear

seatback, always check to be sure that the safety

belts are properly routed and attached, and are

not twisted.

To return the seat(s) to the upright position:

1. Lift the seatback up and push it rearward all

the way.

2. Lower the seat cushion until it latches into position.

3. Pull forward on the seatback and up on the seat

cushion to make sure the seat is securely in

place.

4. Return the head rest (SUV only) to the upright

position.

1-12

Bucket Seats (Reclining Seatbacks)

Vehicles with bucket seats have a manual reclining

seat back function.

The lever used to operate them is located on the

outboard side of the seat(s).

To recline the seatback:

1. Lift the recline lever.

2. Move the seatback to the desired position, then

release the lever to lock the seatback in place.

3. Push and pull on the seatback to make sure it is

locked.

To return the seatback to an upright position:

1. Lift the lever fully without applying pressure to the

seatback and the seatback will return to the upright

position.

2. Push and pull on the seatback to make sure it is

locked.

1-13

Third Row Seat

Entering or Exiting the Third Row Seat

If the vehicle has a third row seat, it is intended for

two passengers and has only two designated seating

positions.

A second row split folding rear seat must be folded

down before entering or exiting the third row. See

“Folding the Seatbacks” under Split Folding Rear Seat

on page 1-11 earlier in this section for instructions.

The third row seatback can be folded and the entire seat

can be tilted or removed from the vehicle.

Folding the Seatback

To fold the seatback:

Notice: Folding a rear seat with the safety belts

still fastened may cause damage to the seat or the

safety belts. Always unbuckle the safety belts

and return them to their normal stowed position

before folding a rear seat.

1. Pull up on the release

lever labeled 1, located

on the rear of the

seatback, and push

the seatback forward.

1-14

Unfolding the Seatback

{ CAUTION:

If either seatback is not locked, it could move

forward in a sudden stop or crash. That could cause

injury to the person sitting there. Always push and

pull on the seatbacks to be sure they are locked.

To return the seatback to the passenger position:

1. Pull up on the release

lever labeled 1 and

then pull up on

the seatback until the

seatback locks into

the upright position.

2. Push forward on the seatback to make sure it is

locked into position.

Tilting the Seat

1. Fold the seatback forward using the instructions

listed previously.

2. Unlatch the seat from

the ﬂoor by pulling up

on the lever labeled 2,

located on the rear

of the seat.

3. Lift the rear of the seat up from the ﬂoor and push it

forward until it locks into place. The seat cannot be

unlatched from the ﬂoor unless the seatback is

folded down.

The seat will now remain locked in the upright position.

1-15

Returning the Seat from a Tilted to an

Upright Position

{ CAUTION:

If either seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

push and pull on the seatbacks to be sure they

are locked.

To return the seatback to an upright position:

1. Pull the lever labeled 3 toward you.

2. While still holding lever 3 toward you, grasp the top

of the seat and pull it toward you slightly.

3. Release lever 3 and pull the seat completely down.

4. Push down on the seat ﬁrmly. Try pulling it up to

be sure it is locked into place.

1-16

Page is loading ...

Hummer 2009 Owner's manual

This manual is also suitable for

Hummer 2009 Owner's manual

Related papers