Avid M-Track Hub User manual

Category
External hard drives
Type
User manual
1
HUB
M -TRACK
User Guide
English ( 3 – 5 )
Guía del usuario
Español ( 6 – 8 )
Guide d’utilisation
Français ( 9 – 11 )
Guida per l’uso
Italiano ( 12 – 14 )
Benutzerhandbuch
Deutsch ( 15 – 17 )
Appendix
English ( 18 )
3
User Guide (English)
Introduction
Box Contents
M-Track Hub
Power Adapter
USB Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit m-audio.com.
For additional product support, visit m-audio.com/support.
4
USB Flash
Drive
Power
External MIDI Devices
USB Flash
Drive
Monitors
Computer
Power
Quick Start
Windows users: Before connecting M-Track Hub to your computer, install the drivers:
1. Go to m-audio.com/drivers and download the latest M-Track Hub driver for your operating
system.
2. Open the file you downloaded and double-click the driver installer file.
3. Follow the on-screen instructions to install the drivers.
Items not listed under Introduction > Box Contents are sold separately.
Example 1
Note: Remember to select M-Track Hub as your sound card in your Control Panel or System
Preferences.
Example 2
Note: Remember to select M-Track Hub as your interface in the Preferences, Options, Device
Setup, etc. in your digital audio workstation (DAW).
HUB
M -TRACK
USB Hard Drive
Tablet
Headphones
Monitors
Computer
Headphones
Rear Panel
Front Panel
Rear Panel
Front Panel
HUB
M -TRACK
5
Features
Rear Panel
1. USB Port: This connection will allow
you to send audio, MIDI, and other
data to and from a computer. Use a
USB cable to connect the M-Track
Hub to a computer. The M-Track
Hub requires a USB 2.0 connection
(or higher).
2. Power Input: Connect the included
power adapter (5 V, 2.5 A, center–
positive) here, then connect the adapter to a power outlet.
3. Main Outputs: Use standard 1/4" (6.35 mm) TRS cables to connect these outputs to
your powered monitors, an amplifier system, etc. Use the Monitor Level knob to adjust
their levels.
Front Panel
1. Headphone Output: Connect 1/4"
(6.35 mm) TRS headphones to this
output.
2. Headphone Volume: Adjusts the
output volume of the Headphone
Output.
3. USB Hub Outputs: You can connect additional USB devices (controllers, hard drives,
etc.) to these powered USB ports. In addition to being an audio interface, these ports
allow M-Track Hub to function as a powered USB hub. This can be useful if you run out
of available USB ports on your computer.
Note: In order to use the USB hub outputs, M-Track Hub must be connected to the
power adapter.
Top Panel
1. Monitor Level: Adjusts the output
volume of Main Outputs, which
should be connected to your powered
monitors or amplifier system.
HUB
M -TRACK
1
HUB
M -TRACK
12
3
1
2
3
3
18
Appendix (English)
Technical Specifications
Inputs 3 USB ports
Outputs
3 1/4” (6.35 mm) TRS
1 USB port
Power
5 V, 2.5 A, center-positive
Dimensions
(width x depth x height)
4.5” x 4.2” x 2.8”
113 mm x 107 mm x 70 mm
Weight
0.75 lbs.
0.34 kg
Specifications are subject to change without notice.
Trademarks and Licenses
M-Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
Windows is a registered trademark of Microsoft Corporation in the United States and other
countries.
All other product or company names are trademarks or registered trademarks of their
respective owners.
20
m-audio.com
Manual Version 1.0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Avid M-Track Hub User manual

Category
External hard drives
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI