2. Modernization Continuum
  3. Studio 5000 Training for Programmable Automation Controllers

Modernization Continuum Studio 5000 Training for Programmable Automation Controllers Operating instructions

  • Hello! I have analyzed the document provided, which details Programmable Automation Controller training options, including classroom, e-learning, and virtual classroom formats. The document outlines training for various aspects of PLC programming, troubleshooting, ControlLogix systems, and ladder logic. I'm ready to answer any questions you have about the training programs or the topics covered.
  • What does the training cover?
    What types of training are available?
    What skills will the training develop?
    Does the training include ladder logic?
    Does the training include project development?
Training for Programmable Automa�on Controllers (PLCs) will help develop the students understanding and skill level
required to program and troubleshoot today’s modern PLCs.
The modern PLCs with �ghtly integrated control systems are requiring an increased skill level to meet today’s
produc�on requirements. Demands to reduce unscheduled down�me, increase equipment efficiencies, and data
acquisi�on is dependent on an onsite skilled workforce.
We can help you develop the proper skill sets required to design, program, and troubleshoot the advanced technology
within today’s PLCs.
Classroom Training:
• Studio 5000® Logix Designer Level 1: ControlLogix System Fundamentals
• Studio 5000® Logix Designer Level 1: ControlLogix Fundamentals and Troubleshoo�ng
• Studio 5000® Logix Designer Level 2: Basic Ladder Logic Programming
• Studio 5000® Logix Designer Level 2: ControlLogix Maintenance and Troubleshoo�ng
• Studio 5000® Logix Designer Level 3: Project Development
• Accelerated Logix5000® Programmer Cer�ficate Level 1
• Advanced Logix 5000® Programmer Cer�ficate
• Accelerated Logix5000® Maintainer Cer�ficate Level 1
e-Learning:
• ControlLogix® Fundamentals
• Studio 5000® Online Monitoring
• Studio 5000® Offline Programming
• Studio 5000® Project Configura�on
Virtual Classroom Training:
• Ladder Logic Basics with CompactLogix® Starter Worksta�on
• Ladder Logic Basics without CompactLogix® Starter Worksta�on
Training for Programmable
Automa�on Controllers (PLCs)
Training for Programmable Automation Controllers (A)
Revere Electric Supply Company
www.revereelectric.com
revereservices@revereelectric.com
M
o
d
e
r
n
i
z
a
t
i
o
n
C
o
n
t
i
n
u
u
m
/