Trim-Tex 4366 Magic Corner Expansion Bead Installation guide

Hello! I've reviewed the provided document, which is a user manual for the Trim-Tex Magic Corner expansion bead. It outlines step-by-step instructions on how to install this product for drywall finishing, including preparing the drywall, applying the bead, and finishing the corner. I'm ready to answer any questions you might have about the installation process or the product's features.
What should I do before installing the bead?

How should I apply the bead?

How often should I staple the bead?

3700 W Pratt Avenue, Lincolnwood, IL 60712 • (800) 874-2333 • trim-tex.com

Installation Guide

Before Installation:

Float out any large dips in the drywall. Measure,

cut and dry ﬁt the bead.

Step 1:

Place a small piece of Magic Corner on both ends

and mark location.

Step 2:

Snap a chalk line or use a laser to join the marks.

Step 3:

Coat both the bead and drywall with Trim-Tex

847 Spray Adhesive.

Step 4:

Press the bead in place, applying pressure to the

mud legs. Staple every 6”-8” using ½” staples.

Step 5:

Finish with drywall compound.

Step 6:

Clean inside corner with installation tool, in order

to ensure the center of the joint is compound-free.

Step 1: Step 2:

1 of 1

Step 3: Step 4:

Step 5: Step 6:

Technical Specs Scan Below for

Installation Video

Magic Corner™

For drywallers who have a lot of inside corners to ﬁnish and

not a lot of time, Trim-Tex’s Magic Corner Expansion Bead

lives up to its name. Like magic, it installs quickly and easily,

even on o-angles and vaulted ceilings. Magic Corner

counteracts inside-corner cracking from structural

movement, with up to ⅜" in controlled movement.

1" ⁄ "