Free The Tone FM-1V Fire Mist Overdrive User guide

Brand
Free The Tone
Model
FM-1V Fire Mist Overdrive
Type
User guide
FIRE MIST/FM-1V
User’s Guide
Thank you for choosing a Free The Tone product. Please read
this user’s manual thoroughly to ensure that you’ll benefit
fully from the advanced features, performance, and reliability
your Free The Tone product is designed to provide.
The FIRE MIST boasts an extended dynamic range, brilliant overtones, long sustain,
quick but fat tone, and of course, the most important thing, pure and clean
overdrive sound. In order to realize all of these things, we thoroughly investigated
various electronic circuits and parts and all of the factors related to sound such as
materials and weight of the case and knobs, magnetic fields in the circuit, etc. After
a few years and many prototypes, we finally completed the FIRE MIST. It renders
edgy, traditional British Rock sound with outstanding response represented by the
golden “Plexi” panel.
FREE THE TONE’s unique HTS (Holistic Tonal Solution) circuit is implemented to
protect guitar signals from sounding thin in Bypass mode.
The LED on the unit has the function not only to show the on/off status of the
effects but also to monitor the battery voltage. If it becomes lower than approxi-
mately 6 V, the LED starts to fade. Although the unit continues to output the effects
sound, we recommend to replace the battery with a new one in order to fully
exihibt its best performance.
Inserting or removing a plug from the
input jack while the unit’s output is
connected to an amplifier/speakers that
is turned on can cause noise that can
damage the speakers. If the unit mal-
functions or behaves abnormally, cease
operation immediately and refer the
problem to the supplier. If the unit will
not be used for an extended period of
time, remove the battery to prevent
damage due to chemical leakage from
the battery. When the battery voltage
drops too low for proper operation the
effect sound may become weak, the
output level may drop, or no output will
be produced at all. Be sure to replace
the battery as soon as possible if such
symptoms occur.
Precautions Main Specification
About the Product
Input impedance: min. 1 M
Output load impedance: min. 10 k
Controls: LEVEL, TONE, DRIVE
Terminals: 1/4" standard phone jack x 2
(input, output), DC 9 V input jack (for AC
adapter connection)
Power supply: 9-volt PP3 battery,
9V DC center negative polarity
Current consumption: 10 mA
Dimensions (W x D x H): 98 x 120 x 51 mm,
3.86 x 4.72 x 2.01 inches (incl. protuberances
such as footswitches, jacks, etc.)
Weight: approx. 640 g, 1.41 lbs (excl. accessories)
Accessories: Warranty card, manual,
rubber foot x 4
Specifications and appearance are subject to change
for improvement without prior notice.
  • Page 1 1

Free The Tone FM-1V Fire Mist Overdrive User guide

Brand
Free The Tone
Model
FM-1V Fire Mist Overdrive
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents