Technics SB-R1 Owner's manual

Brand: Technics

Model: SB-R1

Type: Owner's manual

Technics SB-R1 is a high-quality speaker system that delivers exceptional sound performance. With its flat coaxial 2-way speaker unit and low distortion long stroke woofer, the SB-R1 reproduces audio with remarkable clarity and accuracy. The high rigidity round form cabinet minimizes unwanted vibrations and reflections, ensuring pure and natural sound. The SB-R1 is perfect for audio enthusiasts who demand the best in sound quality and is well-suited for use in home theater systems or for critical listening of music. Here are some of the key features and capabilities of the Technics SB-R1:

Flat coaxial 2-way speaker unit: The SB-R1's unique speaker unit combines a dome tweeter and a midrange diaphragm, delivering a wide frequency response with pinpoint accuracy.

Flat coaxial 2-way speaker unit: The SB-R1's unique speaker unit combines a dome tweeter and a midrange diaphragm, delivering a wide frequency response with pinpoint accuracy.

SB-R1

Owner’s Manual

Manuel d’utilisation

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Instrucciones de funcionamiento

Betjeningsvejledning

Gebruiksaanwijzing

Bruksanvisning

Käyttöohjeet

Speaker System

Enceinte acoustique

Lautsprecheranlage

Enceintes acoustiques

Cassa acustica

Cajas acústicas

Højttalersystem

Luidsprekersysteem

Högtalarsystem

Kaiutinjärjestelmä

SB-R1_SQT0465_PPCEBEGGN_mst.book 1 ページ２０１５年１月２３日　金曜日　午後４時４３分

SB-R1_SQT0465_PPCEBEGGN_mst.book 2 ページ２０１５年１月２３日　金曜日　午後４時４３分

Music is borderless and timeless,

touching people’s hearts across cultures and generations.

Each day the discovery of a truly emotive experience

from an unencountered sound awaits.

Let us take you on your journey to rediscover music.

SB-R1_SQT0465_PPCEBEGGN_mst.book 3 ページ２０１５年１月２３日　金曜日　午後４時４３分

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Safety precautions

≥Do not disassemble or modify the product. Doing so may cause

damage or fire.

≥

Do not place the speakers in unstable locations, such as on a wobbly

table or sloping surface. Do not place the speakers on high or uneven

surfaces or on surfaces vulnerable to vibrations or shocks.

If the speakers tip over or fall, personal injury may result.

≥Keep the spikes out of reach of children. If accidentally ingested,

there will be adverse physical effects. Should you suspect that the

spikes have been ingested, consult your physician immediately.

≥Do not hang the speakers from the ceiling or on the wall. Doing so

may cause the speaker to fall off, causing personal injury.

≥Do not insert objects into the holes of the bass reflex ports on the

rear side. Doing so may cause a fire or personal injury. Be extra

cautious when children are near.

≥Do not stand on or hang down from the speakers. If the speakers

tip over or are damaged, personal injury may result.

≥Do not use the speakers over a long period of time when the

sound is distorted. Doing so may cause the speakers to overheat,

resulting in a malfunction or fire.

≥Do not place heavy or large items on the speakers. If the speakers

tip over or fall, personal injury may result.

≥Do not touch the diaphragms. Doing so may deform the

diaphragms, and as a result, sound may not be output correctly.

≥Keep the speakers out of reach of children, including infants. Not

doing so may cause personal injury if the speakers tip over.

≥

Do not place the speakers in locations subject to extremely high

temperatures. In particular, avoid locations exposed to direct

sunlight and near heating equipment. Please also note that doing so

may cause the outer casing or internal components to deteriorate.

≥Do not place the speakers in locations subject to greasy fumes or

steam, or in humid or dusty locations. Doing so may cause

electricity to be conducted through oil, moisture or dust, resulting

in a fire or electric shock.

≥Keep magnetic items away from the product. Powerful magnets

inside the speakers and speaker nets may damage debit cards,

travel cards (transit passes), clocks and other objects.

≥

Do not insert a finger into the bass reflex ports on the rear of the speakers.

Pay close attention to children as doing so may cause personal injury.

≥Do not connect the speakers to an amplifier with an output greater

than their allowable input. Doing so may cause the speakers to

overheat, resulting in a fire.

≥Each speaker must be carried and installed by at least two people.

Dropping it may cause injury.

≥

Secure the speakers against tipping over. If they tip over in a disaster such

as a powerful earthquake or in an accident, personal injury may result.

If you have any questions, visit:

U.S.A.: www.panasonic.com/support

Canada: www.panasonic.ca/english/support

Sales and Support Information

Customer Communications Centre

≥For customers within the UK: 0333 222 8777

≥For customers within Ireland: 01 447 5229

≥Monday–Friday 9:00 am – 5:00 pm, (Excluding public holidays).

≥For further support on your product, please visit our website: www.technics.com/uk/

WARNING

CAUTION

Product Identification Marking is located on the bottom of the unit.

Disposal of Old Equipment

Only for European Union and countries with recycling systems

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products

must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance

with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human

health and the environment.

For more information about collection and recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

(4)

SB-R1_SQT0465_PPCEBEGGN_mst.book 4 ページ２０１５年１月２３日　金曜日　午後４時４３分

English

Table of contents

Accessories



≥Product numbers provided in this Owner’s Manual are correct as of November 2014. These may be subject to change.

≥The speakers are not supplied with speaker cables. For connection, use commercially-available speaker cables.

Safety precautions............................................................. 4

Accessories........................................................................ 5

About this unit.................................................................... 6

Installation .......................................................................... 7

Connections ..................................................................... 11

Attaching the speaker nets ............................................. 14

Notes on use..................................................................... 15

Unit care............................................................................ 15

Specifications ................................................................... 15

Limited Warranty (ONLY FOR U.S.A.)...........................124

Limited Warranty (ONLY FOR CANADA)...................... 125

About descriptions in this Owner’s Manual

≥The illustrations shown may differ from your unit.

∏4 Spikes

(RGQ0860)

∏4 Spike shoes

(RGQ0861)

∏4 Spacers

(RGQ0862)

∏1 Cleaning cloth

(RGQ0863)

∏2 Short wires

(RJL1W001B02)

∏1 Speaker net

(RYB0402)

(5)

SB-R1_SQT0465_PPCEBEGGN_mst.book 5 ページ２０１５年１月２３日　金曜日　午後４時４３分

About this unit

∫Names of parts and features of the speakers

∫Recommended devices

We recommend using Technics devices (optional) for superior audio quality.

1Flat coaxial 2-way speaker unit

The newly developed flat coaxial two way speaker unit features a dome tweeter capable of reproducing frequencies of up

to 100 kHz, which incorporates a rigid and lightweight carbon graphite diaphragm. In addition, the speaker unit features a

flat midrange diaphragm that eliminates the frequency characteristic disturbance due to the cavity effect caused by the

cone diaphragm. The result is a point sound source that achieves superb sound localisation and provides smooth

directional characteristics over the entire frequency range without peaks or dips.

2Low distortion long stroke woofer

The woofer offers low distortion and superb response in reproducing frequencies even with large amplitude, delivering

bass sound with a wide dynamic range.

3High rigidity round form cabinet

Designed to eliminate unwanted vibration, diffraction reflection, and standing waves, the cabinet allows the reproduction

of faithful and rich sound ambience.

Product name Model number

Stereo Power Amplifier SE-R1

Network Audio Control Player SU-R1

ヒ

ビ

ピ

Front Rear

Bass reflex port

Speaker terminals

≥Each speaker is equipped

with two types of speaker

terminals.

Product Identification

Marking

The model number is located on

the Product Identification Marking

on the rear of this unit. Low frequency range

High frequency range

(6)

SB-R1_SQT0465_PPCEBEGGN_mst.book 6 ページ２０１５年１月２３日　金曜日　午後４時４３分

English

Installation

≥Each speaker must be carried and installed by at least two people.

≥Do not touch the speaker units. Doing so may result in incorrect audio quality.

≥Place the speakers at approximately the same distance from the listening position.

≥The speakers produce bass sound from the bass reflex ports on the rear as well as from the front. Install the speakers at least

5cm (2z) away from the walls so that they do not cover the bass reflex ports on the rear.

≥Keep the amplifier or any other device and the speakers at least 1 cm (13/32z) away from each other.

∫For optimum position

The quality and volume of the bass sound, sound localisation performance, sound ambience, and other factors that determine the

audio quality vary depending on the installation location of this unit, listening position, room conditions, and other factors. Refer to

the information below when installing the speakers.

Determining an installation location.

≥Each speaker has a mass of approximately 72 kg (159 lbs). Check that the installation location is strong enough to bear this

mass.

≥If you need to secure the speakers against tipping over, consult an installation specialist. The strength of the floor and wall must

be verified. (>10)

≥Put the speakers on a flat safe surface.

If the speakers wobble when placed, use the spacers. (>8)

≥To minimise the gap in audio quality between the left and right speakers, install them so that acoustic conditions (reflection and

absorption of sound) around them are the same.

Adjusting the distances between the rear of the speakers and the walls

If you install the speakers close to a wall or in a corner, the bass sound will be more powerful; however, when the speakers are

too close to it, sound localisation performance and sound ambience may deteriorate. If this occurs, adjust the distance between

the speakers and the front wall, which should be between 30 cm (12z) to 60 cm (24z). (Please note that the distance between the

speakers and the side walls should be greater than 60 cm (24z).)

≥Do not drag the speakers with force. Doing so may cause the pads on their feet to peel off, damaging the speakers and floor.

Adjusting the angle of the speakers

Angle the front side of the speakers toward the listener. Following these steps will help the speakers deliver more precise sound

localisation.

Adjusting the acoustics of the room and speaker layout

Depending on the room environment (including the size and shape of the room, distance to the walls and reverberation level),

certain sounds may be exaggerated or suppressed, making them difficult to hear. In such cases, adjusting the reverberation level

by moving the speakers, changing your listening position or covering the walls and windows with thick curtains may help resolve

the problem.

≥The spikes may enhance the audio quality. (>8)

60°

e.g.,

The angle is approximate.

※Speaker units

※

(7)

SB-R1_SQT0465_PPCEBEGGN_mst.book 7 ページ２０１５年１月２３日　金曜日　午後４時４３分

∫Attaching the spacers

Place the speakers on a surface that will not be damaged, such as a carpeted floor, or on a surface that you do not mind

damaging.

≥If the speakers wobble, place the spacers under the metal feet. This will prevent the metal feet from wobbling on the speaker

locations.

∫Attaching the spikes

The spikes may enhance the audio quality.

About the spacers and spikes

≥Keep the spikes out of reach of children to prevent swallowing.

≥Panasonic is not responsible for any accidents or damage caused by improper assembly or handling of the product. Do

not attach the accessories in any other way than instructed in this Owner’s Manual.

≥Each speaker has a mass of approximately 72 kg (159 lbs). When tilting the speakers to attach the spikes, ensure that the

work is done by at least two people. When attaching the spikes, exercise caution to avoid catching your fingers or toes

between the speakers and floor or tipping the speakers over. In addition, ensure that you spread a thick mat or similar item

on the side of the floor where you will be tilting the speakers to prevent damage to the floor.

≥Since each spike supports a mass of at least approximately 18 kg (39.68 lbs), the spikes may leave marks and

indentations on the installation location. To prevent the spikes from damaging the area, use the supplied spike shoes or

purchase spike shoes with large contact surfaces and adequate strength.

≥Moving the speakers with the spikes attached may cause damage to the floor. Before changing the installation location,

remove the spikes.

Metal foot

Spacer

(8)

SB-R1_SQT0465_PPCEBEGGN_mst.book 8 ページ２０１５年１月２３日　金曜日　午後４時４３分

English

1Tilt the speaker backwards, and screw the spikes into the screw holes on the front metal feet.

When using the spike shoes, place them under the spikes.

2While aligning the tips of the spikes with the indentations on the spike shoes, slowly bring the speaker back to the upright

position.

3In the same way as Step 1, tilt the speaker forward and screw the spikes into the screw holes on the rear metal feet.

When using the spike shoes, place them under the spikes.

4If the speakers wobble, place the spacers under the spike shoes. (>8)

Spike shoes

Speaker (front)

Thick mat, etc.

Screw the spikes firmly until

they stop.

Place each spike shoe so that the

side with an indented centre faces

up.

DO NOTDO

(9)

SB-R1_SQT0465_PPCEBEGGN_mst.book 9 ページ２０１５年１月２３日　金曜日　午後４時４３分

The speakers may tip over in a disaster such as a powerful earthquake or in an accident. For your safety, be sure to secure the

speakers against tipping over.

Each speaker weighs approximately 72 kg (159 lbs) in total. Verify that the speaker locations are strong enough to

withstand this weight.

For details, consult an installation specialist.

∫When securing the speakers to a

horizontal surface (floor, etc.)

Secure each speaker to the floor with wires or similar items

as shown in the illustration.

∫When securing the speakers to a vertical

suface (wall, etc.)

Loop a band or similar item around each speaker, and

connect it to a sturdy wall or column with a stout wire, chain

or similar item, as shown in the illustration.



≥The measures described above do not guarantee protection against all disasters and accidents, including earthquakes.

Please note that Panasonic is not responsible for any damage to the speakers, their installation locations or other objects

caused by the work performed to secure the speakers from tipping over.

≥Use of the spikes will make the speakers more vulnerable to tipping over.

Preventing the speakers from tipping over

(10)

SB-R1_SQT0465_PPCEBEGGN_mst.book 10 ページ２０１５年１月２３日　金曜日　午後４時４３分

English

Connections

The speakers are not supplied with speaker cables. For connection, use commercially-available speaker cables.



≥Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the amplifier.

Connecting the speaker cables

1Turn the knobs to loosen them, and

insert the core wires into the holes.

2Tighten the knobs.

- (Black)

+ (Red)

Do not insert the vinyl insulation.

Speaker (rear)

DO NOT

(11)

SB-R1_SQT0465_PPCEBEGGN_mst.book 11 ページ２０１５年１月２３日　金曜日　午後４時４３分

≥Before connection, turn off the amplifier and disconnect its power cord.

≥For details, refer to the operating instructions of the amplifier.

∫Single wiring connection

1Connect the short wires.

2Connect the amplifier and speakers with speaker cables (commercially-available).

Connecting with an amplifier

Short wires

- (Black) + (Red)

Speaker (rear)

Speaker (left)

Speaker (right)

e.g., SE-R1

(12)

SB-R1_SQT0465_PPCEBEGGN_mst.book 12 ページ２０１５年１月２３日　金曜日　午後４時４３分

English

∫Bi-wiring connection

≥The short wires (supplied) are not used for bi-wiring connection.



≥Do not move the speaker while the speaker cables are connected. This may cause a short circuit.

≥When the connections are completed, pull the speaker cables lightly to check that they are connected firmly.

≥Wire the polarity (+/-) of the terminals correctly. Not doing so may adversely affect stereo effects or cause malfunction.

e.g.,

SE-R1

Speaker (left)

Speaker (right)

(13)

SB-R1_SQT0465_PPCEBEGGN_mst.book 13 ページ２０１５年１月２３日　金曜日　午後４時４３分

Attaching the speaker nets

The speakers are supplied with speaker nets, which protect the speaker units from dust.

Use the magnets to fix the speaker nets to the speaker units.

To attach the speaker nets correctly, check their up/down orientation by referring to the illustration below.



≥You can enjoy superior quality audio by removing the speaker nets before playback.

Speaker (front)

Speaker net (rear)

Check the up/down orientation.

DO NOTDO

(14)

SB-R1_SQT0465_PPCEBEGGN_mst.book 14 ページ２０１５年１月２３日　金曜日　午後４時４３分

English

Notes on use

To protect the speakers from damage caused by excessive input, observe the following precautions:

≥Reduce the volume in the following cases to avoid damage:

jWhen playing distorted sound.

jWhen the speakers are receiving howling from a microphone or record player, noise from FM broadcasts, or continuous

signals from an oscillator, test disc, or electronic instrument.

jWhen adjusting the sound quality.

jWhen turning the amplifier on or off.

≥Avoid raising the volume level too much when enhancing the treble sound with a graphic equalizer or any other controls.

≥Avoid outputting excessively loud sound with a small power amplifier. Doing so will increase the amplifer’s harmonic distortion

and may damage the speakers.

≥You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods.

≥Do not touch the speaker terminals with your hands or other objects while the speakers are in use. Depending on the conditions

of use, doing so may expose you to high voltage.

Unit care

Wipe the speakers with the supplied cleaning cloth.

≥When dirt is heavy, wring a wet cloth tightly to wipe the dirt, and then wipe it with a dry cloth.

≥Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior

case to be deformed or the coating to come off.

Specifications



≥Specifications are subject to change without notice.

≥Mass and dimensions are approximate.

Type 3.5-way 6 speakers, bass-reflex type

(coaxial 2-way midrange/built-in tweeters)

Speaker unit

Woofer 16 cm (6 1/2q) cone type k4

Midrange/Tweeter Coaxial 16 cm (6 1/2q) flat type k1 / 2.5 cm (1q) dome type k1

Impedance 4≠

Input power (IEC) 300 W (MAX)

150 W (RATED)

Sound pressure level 88 dB (2.83 V/m)

85 dB (W/m)

Frequency range 20 Hz to 100 kHz (-16 dB)

28 Hz to 90 kHz (-10 dB)

Crossover frequency 300 Hz, 3 kHz

Dimensions (WkHkD) 408 mmk1,260 mmk522 mm (16 1/16qk49 19/32qk20 9/16q)

Mass (Weight) Approx. 72 kg (159 lbs)

Operating temperature range 0 oC to i40 oC (i32 oF to i104 oF)

Operating humidity range 20 % to 80 % RH (no condensation)

(15)

SB-R1_SQT0465_PPCEBEGGN_mst.book 15 ページ２０１５年１月２３日　金曜日　午後４時４３分

Delivering the Ultimate Emotive Musical

Experience to All

At Technics we understand that the listening experience is not purely about technology but

the magical and emotional relationship between people and music.

We want people to experience music as it was originally intended and enable them to feel

the emotional impact that enthuses and delights them.

Through delivering this experience we want to support the development and enjoyment of

the world’s many musical cultures. This is our philosophy.

With a combination of our love of music and the vast high-end audio experience of the

Technics team, we stand committed to building a brand that provides the ultimate emotive

musical experience by music lovers, for music lovers.

Director

Michiko Ogawa

SB-R1_SQT0465_PPCEBEGGN_mst.book 127 ページ２０１５年１月２３日　金曜日　午後４時４３分

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

http://www.panasonic.com

Panasonic Canada Inc.

5770 Ambler Drive,

Mississauga, Ontario,

L4W 2T3

www.panasonic.com

Panasonic Corporation

Web Site: http://panasonic.net

C Panasonic Corporation 2014

Printed in Japan

pqtvurxwsu

SQT0465-1

F1214BM1015

Headquarter Address/Adresse du siège social: Panasonic Corporation

Kadoma, Osaka, Japan

Importer for Europe/Importateur pour l’Europe: Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

SB-R1_SQT0465_PPCEBEGGN_mst.book 128 ページ２０１５年１月２３日　金曜日　午後４時４３分

Technics SB-R1 Owner's manual

Brand: Technics

Model: SB-R1

Type: Owner's manual

Flat coaxial 2-way speaker unit: The SB-R1's unique speaker unit combines a dome tweeter and a midrange diaphragm, delivering a wide frequency response with pinpoint accuracy.

Download PDF

report

Technics SB-R1 Owner's manual

Technics SB-R1 Owner's manual

Related papers

Other documents