Art. 31008
www.KRAFTWERKtools.com
Using-Instructions
Auto emergency tool /
Digital tyre gauge
LED torch Seat-belt cutter Glass-breaker Phillips screwdriver
LED light Scissors Pliers Flat screwdriver
LED torchTORCH
OFF
LED
Display with
blue backlight
Nozzle
LED light
Power on
(for tire gauge)
Pliers
ScissorsScrewdriver
Screwdriver
Seat-belt cutter
Pull
Close
Lock
Pull
Open
LED torchTORCH
OFF
LED
Display with
blue backlight
Nozzle
LED light
Power on
(for tire gauge)
Pliers
ScissorsScrewdriver
Screwdriver
Seat-belt cutter
Pull
Close
Lock
Pull
Open
AAA x 1
APPLICATION
1. Be sure to measure tyre pressure while vehicle is idle.
2. Press “ON” button to turn the display on. It will automatically reset to “0.0”.
3. Apply firmly the nozzle of the gauge onto the tyre valve (after removing the dust cap) and hold until the
reading is stable.
4. The readout will last for approximately 90 seconds, then the display will automatically turn off.
5. To turn off manually press and hold “ON” button for 3 seconds.
6. This gauge can measure tyre pressure in 3 different modes: PSI, BAR, KPa, which can be selected by
pressing “ON” button repeatedly.
7. To turn on the LED or torch, slide the switch to appropriate position.
SPECIFICATIONS
Operating temperature: 0°C-50°C / 32°F-122°F
Measurement range: 3-150 PSI (0.2-10 BAR / 20-1000 KPa)
Accuracy: +/– 1 PSI
BATTERY
Incl. 1 x CR2032
Excl. 1 x AAA
WARRANTY
We do not take responsibility for any damage caused by misuse.
CUSTOMER SERVICES
Contact your local importer of your specialized dealer to obtain address of our service department.
You find our partners under www.KRAFTWERKtools.com
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Other documents
-
XDModo P412.463 Datasheet
-
Vauxhall Zafira Tourer Owner's manual
-
-
Opel Combo 2013 Owner's manual
-
-
-
Countax Garden Tractor User manual
-
CITROEN C3 User manual
-
CITROEN 2008 Berlingo Owner's manual
-
