Infineon CY3290-CYAT8168X Quick start guide

Brand: Infineon

Model: CY3290-CYAT8168X

Type: Quick start guide

Infineon CY3290-CYAT8168X is an automotive multitouch evaluation kit that provides a comprehensive platform for evaluating and developing touch-based applications in automotive environments. With its advanced capacitive touch sensing technology, the kit enables accurate and reliable touch detection on a 10.1" touchscreen.

The kit includes a TSG6XL Evaluation Board, USB Type-A to Mini-B cable, quick start guide, and USB stick with kit installer. The TSG6XL Evaluation Board features a CYAT81688-100AS77 touch sensor controller, providing high-performance touch sensing capabilities.

CY3290-CYAT8168X PSoC™

Automotive Multitouch

QUICK START GUIDE

Evaluation kit

www.infineon.com/CY3290-CYAT8168X

Kit contents

1. TSG6XL Evaluation Board with 10.1” touchscreen

2. USB Type-A to Mini-B cable

3. Quick start guide (this document)

4. USB stick with kit installer

Install the latest version of TTHE from the Infineon

development center by registering to myInfineon.

The TTHE soware can be downloaded from

https://sowaretools.infineon.com/TTHE

— Review the kit contents as shown on the previous page.

— Connect the USB stick to your computer. Run cyautorun.exe from the USB

stick's root directory to install the kit soware and drivers.

— Connect the CYAT8168X EVK assembly to your computer using the

USB cable. Make sure the PWRSEL switch is towards the PC port.

— Wait for the kit driver enumeration to complete. The Power LED (Red)

on the sensor board turns on. Then, launch the Touch Tuning Host

Emulator from the Start menu.

— Click Open Project and browse to select C:\Program Files (x86)\Cypress\

CY3290-CYAT8168X AUTOMOTIVE EVK\<version>\TTHE Config Files\TSG6_XL

_GC6_CYAT81688-100AS77_EVK\TSG6_XL_GC6_CYAT81688-100AS77

_EVK.config.

— Click Tools > Options. Select I2C, set I2C Clock to 400K, and set the Touch

Tuning Bridge (TTBridge)I2C Pins to Pin 6,8; click OK.

Initial setup

TTBridge communication setup

Connect USB cable

Quick Start Guide Page 2 of 4

TTBridge communication setup

— Click Toggle Connection/Power to power the EVK board. The icon

changes to.

— If the TTBridge FW Upgrade window pops up, verify if the TTBridge version

is 1.35 or later. If it is not, then update the firmware by clicking Yes.

Click Close when complete. Click No if the version is already 1.35 or later.

— Click Run to read the configurable parameters. The pop-up window

shows the progress of the read configurable parameters.

— Click Close when complete if the status window does not close automatically.

— This step is necessary only if the above window is displayed. This will occur if

the device's configuration does not match the project's configuration.

— Click Sync All From Project to download the configuration parameters from

the TTHE project to the device. Click Apply.

— Place fingers on the glass. The grid shows the finger touch locations.

— Refer to the CY3290-CYAT8168X PSoC™ Automotive Multitouch EVK Kit Guide

for additional details on using the kit.

Start communication

Parameter Mismatch dialog

Touch reporting

Quick Start Guide Page 3 of 4

Start communication

Parameter Mismatch dialog

Touch reporting

CY3290-CYAT8168X Sensor Board Details

2 x 50 Pin Flex Connectors for 23 x 42 ITO Glass

CYAT81688-100AS77

Isolation Bridge/TTBridge Connector

Published by

Infineon Technologies AG

81726 Munich, Germany

Document Number: 002-16094 Rev. *E

Date: 06 / 2023

Additional information

For further information on technologies, our products, the

application of our products, delivery terms and conditions

and/or prices, please contact your nearest Infineon Technologies

oice (www.infineon.com).

Warnings

Due to technical requirements, our products may contain

dangerous substances. For information on the types in question,

please contact your nearest Infineon Technologies oice.

Except as otherwise explicitly approved by us in a written

document signed by authorized representatives of Infineon

Technologies, our products may not be used in any life-

endangering applications, including but not limited to medical,

nuclear, military, life-critical or any other applications where a

failure of the product or any consequences of the use thereof

can result in personal injury.

www.infineon.com Please note!

This document is for information purposes only and any

information given herein shall in no event be regarded as a

warranty, guarantee or description of any functionality,

conditions and/or quality of our products or any suitability

for a particular purpose. With regard to the technical

specifications of our products, we kindly ask you to refer

to the relevant product data sheets provided by us.

Our customers and their technical departments are

required to evaluate the suitability of our products

for the intended application.

We reserve the right to change this document and/or

the information given herein at any time.

Infineon CY3290-CYAT8168X Quick start guide