Register Sizing Guide
Remove old register and measure the length and width of your vent before buying. Vent sizing may be inconsistent,
so ensure you are receiving the right size using our Online measuring quiz or the sizing chart below.
EXAMPLE: If your vent length is 9.85” and the width is 4.10” then you would choose the 4” x 10” register.
FIND YOUR REGISTER SIZE
Need measuring assistance? Take our
two-question measurement quiz to
find the perfect size register for you!
MEASURING QUIZ
VENT WIDTH REGISTER SIZESVENT LENGTH
2” x 12”
2” x 10”
2” x 14”
3” x 10”
4” x 8”
4” x 10”
4” x 12”
4” x 14”
6” x 10”
6” x 12”
6” x 14”
11.75” – 12.25”
9.75” – 10.25”
13.75” – 14.25”
9.75” – 10.25”
7.80” – 8.25”
9.75” – 10.25”
11.75” – 12.25”
13.75” – 14.25”
9.75” – 10.25”
11.75” – 12.25”
13.75” – 14.25”
2.25” – 2.50”
2.25” – 2.50”
2.25” – 2.50”
2.80” – 3.25”
3.80” – 4.25”
3.80” – 4.25”
3.80” – 4.25”
3.80” – 4.25”
5.80” – 6.25”
5.80” – 6.25”
5.80” – 6.25”
LENGTH
WIDTH
inches
10
0.50
0.750.25
1.50
1.751.25
2.50
2.752.25
3.50
3.753.25
4.50
4.754.25
5.50
5.755.25
6.50
6.756.25
7.50
7.757.25
8.50
8.758.25
9.50
9.759.25
9.50
9.759.25
2 3 4 5 6 7 8 9 10 11
STEP 2: CONFIRM PRINT SIZE
To ensure the rulers’ sizing is accurate please verify that
the page printed correctly by placing an ID card or a Bank
card into the area below. If the card fits you can start
measuring. If not, please reprint this page using the
correct settings listed in step 1.
STEP 1 : PRINTING INSTRUCTIONS
Print on letter sized paper (8.5”W x 11”H) at actual
size (100%) with portrait mode selected. Please DO
NOT print with the fit to page setting on or ruler
sizing will not be accurate.
Need a larger ruler? You can print out two
copies of this page and tape them together!
ACTUAL SIZE
11” Printable Ruler
-
1
-
2
Decor Grates ST412 Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI