KT DD04-612I:
A device that features a standby power cut-off function, electricity consumption measurements, and Z-wave communication.
Easy to set up: Inclusion and Exclusion can be done by pressing the button on the Smart Plug for 5 seconds until the LED starts blinking.
Manual control: You can turn the relay on or off manually by briefly pressing the button on the Smart Plug.
Remote control: The Smart Plug can be controlled remotely using the Basic Set Command. Relay On: Value: 0xFF, Relay Off: Value: 0x00. The device will send an acknowledgment Notification – 0x03: RelayOn, 0x02: RelayOff
KT DD04-612I:
A device that features a standby power cut-off function, electricity consumption measurements, and Z-wave communication.
Easy to set up: Inclusion and Exclusion can be done by pressing the button on the Smart Plug for 5 seconds until the LED starts blinking.
Manual control: You can turn the relay on or off manually by briefly pressing the button on the Smart Plug.
Remote control: The Smart Plug can be controlled remotely using the Basic Set Command. Relay On: Value: 0xFF, Relay Off: Value: 0x00. The device will send an acknowledgment Notification – 0x03: RelayOn, 0x02: RelayOff
KT DD04-612I:
A device that features a standby power cut-off function, electricity consumption measurements, and Z-wave communication.
Easy to set up: Inclusion and Exclusion can be done by pressing the button on the Smart Plug for 5 seconds until the LED starts blinking.
Manual control: You can turn the relay on or off manually by briefly pressing the button on the Smart Plug.
Remote control: The Smart Plug can be controlled remotely using the Basic Set Command. Relay On: Value: 0xFF, Relay Off: Value: 0x00. The device will send an acknowledgment Notification – 0x03: RelayOn, 0x02: RelayOff
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI