Magnavox MME239 - Micro DVD Home Theater System Quick start guide

Type
Quick start guide
SUBTITLE
CR2025
MME239
Quick Start Guide
SMART. VERY SMART.
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
Quick start guide
2
User Manual
Remote control with one
CR2025 battery loaded
DIN cable
User manual
Composite video cable Remove the insulation plastic tab
before use
FM wire antenna
MME239 QSG_Eng-37 29/7/06, 11:201
Speakers
Right Speaker
Subwoofer White
Red
Green
Black
+
1 1
3
4
5
AC Power Cord
FM wire antenna
TV
2
ANTENNA
FM
(75)
Important!
This set can only be operated after the
supplied DIN cable has been connected.
Tips
See the User Manual for other TV
connection options.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
3
4
5
Connect the speaker wires of the right speaker and subwoofer to the
left speaker.
Connect the left speaker and the DVD player by using the supplied
DIN cable.
Connect the DVD player to your TV using the supplied composite video
cable.
Connect the AC power cord to the wall socket.
2
Connect the supplied FM wire antenna.
Setting up the TV
Press SOURCE (DISC on the remote) to select disc source.
Turn on the TV and set it to the correct Video In channel.
1
2
Notes for the remote control:
First, select the source you wish to
control by pressing one of the source
select keys on the remote control
(DISC or AUX, for example).
Then select the desired function
(
2;
,
í
,
ë
for example).
MME239 QSG_Eng-37 29/7/06, 11:202
OFF
OFF
NIGHT MODE
GOTO SOUND SETUP PAGE
TEST TONE
Tip
See chapters "Getting Started" and "DVD menu operations" in the
User Manual for detailed descriptions.
SETUP MENU
8 ADULT
CHANGE
ENGLISH
RESET
GOTO FEATURE SETUP PAGE
OSD LANG
NORMAL/PS
MULTI
OFF
ON
GOTO PICTURE SETUP PAGE
TV DISPLAY
TV TYPE
PROGRESSIVE
SCREEN SAVER
ENGLISH
ENGLISH
ENGLISH
GOTO LANGUAGE SETUP PAGE
AUDIO
SUBTITLE
DISC MENU
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the video cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode then turn on to interlaced mode.
2) Select “OFF” in PROGRESSIVE menu of the system setup menu to turn off
progressive scan, then press SYSTEM MENU on the remote to exit the system
menu.
Or To turn off progressive scan, you may also first open the disc door, then hold
down on the front panel, and press numeric key “1” on the remote.
Setting the clock
1
2
3
4
In standby or power on mode, press and hold CLOCK on the remote control.
The clock digits flash on the display.
Press ¡ / repeatedly to set the hours.
Press à / á repeatedly to set the minutes.
Press CLOCK again to store the setting.
CLOCK
SYSTEM MENU
MME239 QSG_Eng-37 29/7/06, 11:203
Playing a disc
1
2
3
4
Push OPEN /CLOSEç to open the disc door.
Load in a disc with the label side facing up, then close the disc door.
Playback will start automatically. If not, pressÉÅ.
To stop playback, press 9.
PDCC-JH-0630
Tip
Detailed playback features and
additional functions are described in the
accompanied user manual.
Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote) to select tuner source (FM).
Press PROGRAM on the set for more than two seconds to program all available stations
in order of waveband.
Press ¡ / (Numberic keys on the remote) until the desired preset station is displayed.
To switch on the system,
press STANDBY ONB/
SOURCE on the set, or
DISC/TUNER/AUX on the
remote.
MAGNAVOX
P. O. BOX 671539, Marietta, GA. 30006-0026
http://www.magnavox.com/usasupport
TUNING
MME239 QSG_Eng-37 29/7/06, 11:204
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Magnavox MME239 - Micro DVD Home Theater System Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI