Gigabyte R181-NA0 User guide

Management Console

User’s Guide

(AST 2500 Chipset)

Version: 1.2

1

Table of Contents

Using Your Management Console..................................................................................................... 2

Management Console Key Features and Functions .......................................................................... 3

Software Install ................................................................................................................................. 4

Prerequisites on remote management PC .................................................................................. 4

Install Java Tool ........................................................................................................................ 4

Management Console Network Configuration ......................................................................... 5

Using the Web UI .............................................................................................................................. 6

Management Console Overview ....................................................................................................... 7

Enter Management Console .............................................................................................................. 8

Properties .................................................................................................................................. 8

Configuration ............................................................................................................................ 9

Network ............................................................................................................................. 9

Network Security .................................................................................................................... 10

Security ................................................................................................................................... 11

Users ............................................................................................................................... 12

Services ........................................................................................................................... 13

Time Setting .................................................................................................................... 14

Language ................................................................................................................................. 15

Sessions ................................................................................................................................... 16

LDAP ...................................................................................................................................... 17

Updates ................................................................................................................................... 18

Utilities .................................................................................................................................... 19

Server Information .................................................................................................................. 20

LEDs ............................................................................................................................... 20

Sensor Monitor ................................................................................................................ 21

Power Control ................................................................................................................. 22

Power Consumption ........................................................................................................ 23

System Event Log ................................................................................................................... 24

Platform Event ................................................................................................................ 25

Trap Settings ................................................................................................................... 26

Email Settings ................................................................................................................. 27

Serial Over LAN ..................................................................................................................... 28

vKVM & vMedia .................................................................................................................... 29

vKVM Viewer and Virtual Media Session Lanuch ......................................................... 29

vKVM & vMedia Session Configuration ........................................................................ 31

System Information ................................................................................................................. 32

Processor Information ............................................................................................................. 32

Memory Device Information ................................................................................................... 33

Storage Information ................................................................................................................ 34

System NIC Information ......................................................................................................... 35

2

Using Your Management Console

The Management Console has a user-friendly Graphics User Interface (GUI) called the

Management Console GUI. It is designed to be easy to use. It has a low learning curve because it

uses a standard Internet browser. You can expect to be up and running in less than five minutes.

This chapter allows you to become familiar with the Management Console GUI’s various

functions. Each function is described in detail.

3

Management Console Key Features and Functions



Support IPMI v2.0



Out-of-band monitoring and control for sever management over LAN.



FRU information report includes main board part number, product name, and manufacturer, etc.)



Health status/Hardware monitoring report.



Events log, view, and clear.



Event notification via PET (Platform Event Trap).



Platform Event Filtering (PEF) to take selected action for selected events.



Chassis management includes power control and status report, front panel buttons and LEDs

control.



Support multi-session user, and alert destination for LAN channel.

4

Software Install

Prerequisites on remote management PC

Before installing Java tool, please check your system for the following required configuration

requirements:

 Supported Browsers:

 Internet Explorer 8 - 11

 Google chrome Version 29.0.1547.66m

 Firefox 2.0

 JAVA Recommended Version 6.45 or Below (file size: ~ 16691KB)

Install Java Tool

Please follow the instruction to install Java in Windows operating system.

1. Go to http://www.java.com

2. Click Download on the middle of the home page.

3. Click on Agree and Start Free Download

4. Click see all Java downloads

5. Choose the folder location. (Save the file to a known location on your computer)

6. Click Save.

7. Click Yes to replace.

8. Verify that the

 Name of the file is jre-6u45-windows-i586.exe

 Size is approximately 16691KB.

9. Close all applications including the browser.

10. Double-click on the saved file icon to start the installation process.

5

Management Console Network Configuration

Please follow the instruction to enable the console redirection function.

You can gather the IP address.

6

Using the Web UI

The BMC firmware features an embedded web server, enabling users to connect to the BMC using an

Internet browser (Microsoft® Internet Explorer™).

The web server shall support 4 concurrent connections

Web-based GUI is supported on the following browsers:

Microsoft Windows:

• Internet Explorer 8 ~ 11

• Mozilla® Firefox® 2.0 or later

Linux:

Mozilla Firefox 2.0 or later

7

Management Console Overview

1. Open a web browser and type in your identified IP. The IP address can be found using your

DHCP server.

2. A dialog box prompts you to enter Username and Password.

3. Enter the following values:

Account 1 Username: admin Password: password

Account 2 Username: ADMIN Password: ADMIN

When you log in using the root user name and password, you have full administrative

powers. It is advised that once you log in, you change the root password.

8

Enter Management Console

After you successfully log into your Management Console, the Remote Management Console GUI

appears.

Properties

Properties displays the firmware version of current remote client system.

9

Configuration

Network

You can view and modify the network settings on this screen. Select the Network Mode from the

drop-down list.

1. Dedicate Mode

When set to Dedicate Mode, you can configure the BMC related settings through the BMC port.

2. Shared Mode**

When set to Shared Mode, you can configure the BMC related settings through the NIC2 port.

(Shared NIC Mode)

NOTE: Function available on selected models.

3. Failover Mode

When set to Failover Mode, you can configure the BMC related settings through the BMC or

NIC2 port. (Backup Mode)

When you finish configuration, click Apply Change.

Please note that the changes may not take effect immediately, click "Refresh" to take effect of

changes.

NOTE: Function available on selected models.

10

Network Security

You can configure the network security settings on this screen. Check the IP Blocking Enabled

box and input the desire value of IP Blocking Fail Count, IP Blocking Fail Window, and IP

Blocking Penalty Time. After you finish the configuration, click Apply Change to save the

settings.

11

Security

The Security page shows the current certificate status.

To generate a new certificate, click Generate Certificate.

To upload a certificate, click Upload Certificate.

12

Users

To configure a specific user, click the Users ID. To display new user information, click Refresh.

NOTE: BMC convention for enabling an ‘anonymous’ login is to configure the entry for User ID

1 with a null username (all zero’s) and a null password (all zero’s). Applications may then present

this to the user as an anonymous login.

13

Services

You can configure the web server parameters (such as, HTTP Port Number, HTTPS Port Number,

and Timeout) on a remote computer. By default, the timeout is 1800 seconds.

When you finish the configuration, click Apply Changes.

14

Time Setting

This page provides the mechanism to configure the Network Time acquisition method. With

Administrator or Operator privilege level, you can modify configuration settings and click the

Apply Changes button to execute the settings, as well as click the Sync Time Now button (when in

Requested Mode) to request an immediate clock set.

Operation Mode

Configures the NTP Mode. You can Disable NTP, set Requested Mode, or Daemon Mode in this

parameter.

In Requested Mode, you can request an immediate clock synchronization with the NTP server;

request will be sent when click the Sync Time Now button.

The Daemon Mode runs NTP daemon which sends a NTP request at approximately 5 minute

intervals. Multiple NTP servers may be specified to provide redundancy.

Time Synchronization Method

Specifies the synchronization method for Requested Mode. Select Slew mode when you want to

adjust the time smoothly over time if there are time sensitive applications in place. Select Step

mode to aggressively change the time using settimeofday() system call.

15

Language

This page allow users to choose preferred language when using the WebUI.

When you finish the configuration, click Apply Change.

16

Sessions

This screen displays information on Active Sessions. Additionally, the trash can icon provides the

delete function for privileged users. Click Session log to view the session log. Click Refresh to

refresh the Sessions status.

17

LDAP

LDAP screen allows download user list of LDAP server then create Management Console user

account from this list directly.

Check the box below to enable LDAP authentication and enter the required information to access

the LDAP server. Click Apply Changes to save your changes.

18

Updates

The firmware can be updated remotely.

To update firmware, follow the instruction below:

1. Select Update Type.

2. Select the file on your local system by using Browse.

Click Upload to update to the new version of firmware.

19

Utilities

Utilities provides BMC reboot and Factory default restore functions.

1. To reboot system, click Reboot.

2. To restore factory default, click Factory Default.

3. To Adjust the PWM offset for the system fans, enter offset values and click Submit.

4. To update Logo, select the file on your local system using Browse and click Update.

Page is loading ...

Gigabyte R181-NA0 User guide

Gigabyte R181-NA0 User guide

Related papers

Other documents