Shoe Clamp System
Description
The Wilton Welder's Shoe Clamp System makes it
possible to clamp anywhere on a fixture, table or
fabricated piece, unlike the C-Clamp which limits
clamping to near the edge of a surface. This
system consists of a shoe (F), which is bolted or
welded into place, and the L-Clamp (A) with special
mounting foot that slides into the shoe. Shoes can
stay put for convenience and the clamp can still be
used on other fixtures by purchasing additional
shoes which are available in quantities of six.
Specifications
Stock Number ................................................ 63295
Nominal Opening Capacity (in.) ...................... 8-1/2
Throat Depth (in.) ............................................ 5-1/2
Nominal Rail Size (in.) .................... 1-13/16" x 9/16"
Nominal Clamping Pressure (lbs.) .................. 2,600
Nominal Spindle Diameter (in.) ........................... 3/4
Net Weight (lbs.) .................................................... 8
Carton Pack ........................................................... 1
Application
1. Weld or bolt the shoe (F) in place anywhere on
a fixture, table or fabricated piece.
Note: Welding should only be done by
accomplished welders using 7018 filler metals
only.
2. Slide clamp (A) into shoe (F). More than 8
inches of vertical adjustment is possible.
Index Part No. Description
............. 63295 ............ Clamp System ... (see Note)
Replacement Parts
B .......... 1701602 ........ ............ Spindle w/ T-Handle
C .......... 1701702 ........ ...................................... Nut
D .......... 1701502 ........ ....................... Joint and Pin
E .......... 2909102 ........ ........ Pad - Plain (Standard)
E1 ........ 2909202 ........ ..................... Pad - Serrated
E2 ........ 2909302 ........ .................................. V-Pad
F ........... 63299 ............ ................. Shoes (Pkg of 6)
Note: Consists of 1 ea. of Items A, B, C, D, E, F
Ordering Replacement Parts
To order parts or reach our service department,
call 1-800-274-6848 between 8:00am and 5:00pm
CST, Monday through Friday.
WILTON
427 New Sanford Rd Part No. M-63295
LaVergne, TN 37086 Revision A1 07/2019
Ph.: 800-274-6848
www.wiltontools.com Copyright © Wilton, a division of JPW Industries, Inc.
WARNING: This product can expose you to
chemicals including nickel, which is known to the
state of California to cause cancer, and lead which
is known to the State of California to cause cancer
and birth defects or other reproductive harm. For
more information go to http:// www.p65warnings.
ca.gov.
-
1
