Hodedah HI816 Assembly Instructions Manual

Type
Assembly Instructions Manual
ASSEMBLY INSTRUCTIONS
HODEDAH
www.hodedah.com
1
HI816
METAL BED
Breakdown Structure
HODEDAH
www.hodedah.com
F
A
A
A
A
4
D
D
D
D
C
E
F
E
C
B
B
B
B
Parts
HODEDAH
www.hodedah.com
5
Hardware
1 un.
Head Board Foot Board
1 un.
Bed Sheet
2 un.
Connector
2 un.
Support Leg
4 un.
ABolt
1/4*90mm
4 un.
BBolt
1/4*30mm
4 un.
CBolt
1/4*23mm
8 un.
DAnchor
4 un.
EBolt
8 un.
15*1/4*15mm
FAllen Key
2 un.
1/4
HARDWARE REQUIRED
2*A 2*D 1*F
A
D
A
D
2*A 2*D 1*F
HODEDAH
www.hodedah.com
Step 1
Step 2
HARDWARE REQUIRED
6
· Attach bed sheet (3) to head board (1), insert the small steel plate into groove.
· Insert anchor (D) into the hole on bed sheet, thread bolt (A) through head board to attach bed sheet.
(see pictures for example)
· Attach bed sheet (3) to foot board (2), insert the small steel plate into groove.
· Insert anchor (D) into the hole on bed sheet, thread bolt (A) through foot board to attach bed sheet.
(see pictures for example)
8*C 8*E 2*F
HODEDAH
www.hodedah.com
HARDWARE REQUIRED
Step 3
Step 4
4*B 1*F
HARDWARE REQUIRED
7
· Put head board and foot board together with connector (4).
· Align bed sheet holes with connector holes, thread bolt (C) into holes from inside, thread bolt (E)
into holes from outside, attach together with allen key (F). (see pictures for example)
C
F
F
C
E
E
B
· Attach support leg (5) to bed sheet.
· Insert bolt (B) into holes of bed sheet from top after aligning holes. (see pictures for example)
In the interest of our environment please dispose of all packaging thoughtfully.
Job Complete !
HODEDAH
www.hodedah.com
Step 5
8
· Tighten all bolts with allen key (F) after making sure they are in the right position.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Hodedah HI816 Assembly Instructions Manual

Type
Assembly Instructions Manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI