Vacron SA-650HD Quick Manual

Brand: Vacron

Model: SA-650HD

Category: Drive recorders

Type: Quick Manual

Playback

1. Playback on DVR site

Click on remote controller, to enter record list, using

to select footage , click again to enter playback screen.

(Use remote controller)

Playback menu Playback screen

2. 3G client software for viewing directly

Executive “3G ClientApp.exe software and login (bus/123456) ,

the software interface shown as below.

(Select models with 3G modules)

Choose split screen

Add the vehicle information

Preview

Vehicle name

Camera Channel

The event log and

vehicle driving records.

Google Map and inquiry the date

and time record of the vehicle.

Vehicle information

Google Map

Real-time image

«For more detailed information, please check the manual

in CD for reference.

H12A650H01

3. Through Carbox Player on PC site (Use HDD to playback directly)

★GPS Coordinate, Speed and Google Map

(select models with 3G modules)

Viewer interface schematic

Note:

before running CarBox2 software.

Caution: It needs to install DirectX 9.0 or above

Position

Latitude &

Longitude

G Sensor

Speed

Video Searching BAR

Play Speed

Volume

Control Interface

Description

Hard Disk Backup

Configuration

Google Map

Open Folder

Snapshot

3G client software Note: To perform this software will require DirectX 9.0 or more.

★Power on / Record

Turn on the power, and it will take approximately 40 seconds to

boot up. During the recorder booting up, the HDD indicator LED will

start flashing as the recording is in progress.

1. Red light: light on, means power on; light off, means no

power/power off.

2. Green light: light flashing, means HDD take recording; light off

means non-recording.

★Power off/Stop recording

Power off also stop recording, at then you can take out HDD to

read the recorded files.

Quick Guide

Vehicle

4-CH DVR System

Power On( ) / Record( )Turn off Stop record

.Standard: Main Machine, Remote Control, 3 Pin Power Cable,

Harness Plug for Video Input , Alarm Cable, Driver CD,

Quick Guide

2.Optional: 3G Module, G-Mouse

Accessories

Feature

Select Decode Items

Start Record Time

2011/06/30 17:05:13

2011/06/30 18:09:42

2011/06/30 19:14:06

2011/06/30 20:18:30

2011/06/30 21:22:54

Page 00001

2011/06/30 16:00:46

End Record Time

2011/06/30 18:09:41

2011/06/30 19:14:05

2011/06/30 20:18:30

2011/06/30 21:22:53

2011/06/30 22:27:14

Total Pages 00003

2011/06/30 17:05:13

Execute the CarBox2.exe from CD-ROM , the display as showing

below.

G-sensor: Detect & record G-force data.

X: Induct about level of vehicles moving

Y: Induct around level of vehicles moving

Z: Induct Height fluctuation around level of

vehicles moving

Setting

Recording Set Up

Please follow the steps below:

1. Plug the into PC directly or through USB converter.

2. Execute the player CarBox2.exe into main page.

3.Click icon to into the screen as below.

HDD

Select the location

of HDD

format

restore

êFor more detailed information, please check the

manual in CD for reference.

HDD Format / Restore

Q: Two ways to format the HDD, format and restore.

When should you「format」or「restore」the HDD?

Ans:

1.「Format」HDD: When you use the HDD for the very first time or a

brand new HDD, you should format it in order to use it correctly.

2.「Restore」HDD: When you have backup the recorded files into PC and

want to use the HDD for other purposes, you have to restore it first

so it can be used correctly.

1. On Screen Set up

2. Through CarBox2 Player in case without Monitor

A:Remove the HDD and plug it to PC

B:Launch the software enter setup page show below:

Before start recording, please configure the setting well and then

into the host. The configuration interface of its options detailed instructions,

please see the operation manual of CD-ROM.

plug HDD

2011 DEC V1.0

optional

TYPE B: 3G Module

TYPE A: Without 3G Module

H.264

-20~+65℃

(inside vehicle)

120/100fps

NTSC/PAL

ALARM

Audio

4CH 3D

G-Sensor

SATA HDD

2.5"

HDD

3G Module

TYPE B

GPS

1. Provide Video output for playing-back mode in mainframe.

2. Recording format: D1 and CIF

3. Support 1CH Audio Input.

4. User friendly player software, easy to operation.

5. Overall quick search event log.

6. The full recording time and date can be showing in the monitor directly.

7. Wide range voltage design.

8. Auto recording after power supplied.

9. Removable HDD Track compatible with 2.5" HDD or SSD.

10. Provide 4 sets of alarm input ports, built-in buzzer.

11. Firmware can be upgraded via USB port.

12. Support recording audio, video, G-sensor and GPS data at the same time.

13. Optional 3G module, for real time monitoring the driving statue, or talk

to driver

Remote Controller

Front Panel

Rear Panel

CH1 Display

CH3 Display

Mute

Enter

Fast Rewind

Play

Step/Pause

CH2 Display

Recording

Quad Display

Up / Down / Left / Right

Fast Forward

Stop

CH4 Display

Operating Manual

► Main menu page switch

Delete All Record Data

Default Live View Channel

Power Management

Firmware Update

page 1/3 setting page 2/3 setting

Set Encode Parameter

Set Video Parameter

Set Time

Set Plate Number

1. Set Encode Parameter

Set Encode Parameter

Set Video Parameter

Set Time

Set Plate Number

Set Encode Parameter

Encode Frame Size : D1

Encode Frame Rate : 15

Encode Quality : High

3. Set Time

Set Encode Parameter

Set Video Parameter

Set Plate Number

Set Time

Please Input Time:

/ / : :

2011 07 01 08 50 50 GMT 08:00

4. Set Plate Number

Set Encode Parameter

Set Video Parameter

Set Time

Set Plate Number

Please Input Plate Number:

5. Delete All Record Data (Format Disk)

★Caution! All data will be deleted when you click “Yes”.

Delete All Record Data

Default Live View Channel

Power Management

Firmware Upgate

Delete All Record Data

Warring! Are you sure?

No Yes

6. Default Live View Channel Display

Delete All Record Data

Power Management

Firmware Update

Default Live View Channel

Please Choose LiveView Single/Multi

Channel (s) When Starting!

Multi-Channels Channel 1

2. Set Video Parameter

Set Encode Parameter

Set Time

Set Plate Number

Set Video Parameter

Ch1 Brightness

Ch1 Contrast

Ch1 Hue

3G Moudle(TYPE B)

Video Input

Video Output GPS(optional)

Audio Output Power Input DC 8-28V

G O I G O

G 4 3 2 1

ALARM IN

AUDIO VIDEO

Harness Connector

Alarm

Input

Audio Input/Output

Video Output

1.DC12V output (+)

2.Signal and general DC

grounding

3.Signal and general DC

grounding

4.DC8~28V input (+)

5.ACC starter control

6.GNDP car power grounding.

(negative electricity)

Harness Connector:

Assorted cable includes

4 sets of Video input,

power core and

S connector.

G 4 G 3 G 2 G 1

GGGG

+V +V +V +V

DC12V OUT

VIDEO IN

page 3/3 (3G module)

Version

MDVR ID

3G Network

Alarm Setting

page 3/3 (without 3G module)

Version

Alarm Setting

Password Setting

7. Power Management

Delete All Record Data

Default Live View Channel

Firmware Update

Power Management

Please Choose Stop-Record-Time

After Car stalled!

0 Minute

10. Check MDVR ID Information

(Only available when DVR with specific 3G module)

Version

3G Network

Alarm Setting

MDVR ID

MDVR ID: TT000255

9. Check Firmware Version

Version

MDVR ID

3G Network

Alarm Setting

Version

Kernel Version: 3412

RootFs Version: 3412

Application Version: 3412

2011/08/09 09:27:19

8. Firmware Update

Delete All Record Data

Default Live View Channel

Power Management

Firmware Update

Don’t Power Off in Updating

Update 3339eng.upd

No Yes

11. 3G Network Setting

(Only available when DVR with specific 3G module)

Version

MDVR ID

Alarm Setting

3G Network

3G-Service:

UserName:

Passwork:

Port:13579

12. Alarm setup

Version

MDVR ID

3G Network

Alarm Setting

Alarm 1 :

Alarm 2 :

Alarm 3 :

Alarm 4 :

Ch1

Ch2

Ch3

Ch4

13. Password Setting

(3G version without this function)

Version

Alarm Setting

Password Setting

* * * * Sure

F U 1 2 3 4

2.5”HDD

Power Indicator LED

Record Indicator LED

HDD Lock

USB

SIM Card Slot (TYPE B)

IR Receiver

Vacron SA-650HD Quick Manual

Brand: Vacron

Model: SA-650HD

Category: Drive recorders

Type: Quick Manual

Download PDF

report

Vacron SA-650HD Quick Manual

Vacron SA-650HD Quick Manual

Related papers

Other documents