2. Bradley Corporation
  3. 346-100000

Bradley Corporation 346-100000, 357-000000 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Bradley Corporation 346-100000 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
P.O. Box 309, Menomonee Falls, WI USA 53052-0309
PHONE 800.BRADLEY (800.272.3539) FAX 262.251.5817
bradleycorp.com
Installation
Waste Receptacle Liners
Part Numbers P11-001, P11-004, P11-005, P11-006, P11-007,
P11-015, P11-019, P11-020, P11-041, P11-042, P11-043
and P11-044
P20-134 Rev. A; ECN 12-15-002F
© 2012 Bradley
Page 1 of 1 11/28/2012
Installation Instructions
1. Using alcohol rub supplied, clean the surface of the waste receptacle where the
hook-and-loop fastener is to be applied.
• When installing on the Diplomat
™
unit, apply hook-and-loop on all corners
as well as entire front edge of waste receptacle.
2. Insert the new vinyl-coated nylon liner into the waste receptacle, aligning the
corners of the liner with the corners of the receptacle.
3. Peel the plastic backing off of the hook-and-loop fastener and attach the liner to
the receptacle.
Wait 24 hours for hook-and-loop fastener to cure before using
the waste receptacle.
/