Acrosser Technology AR-ES5630FL Owner's manual

Brand: Acrosser Technology

Model: AR-ES5630FL

Type: Owner's manual

AR-ES5630FL Installation Guide

ACROSSER

®

AR-ES5630FL

Powered by Intel GME965 Core™ 2 Duo, EPIC SBC

with CRT, LCD, LAN, USB2.0, PCI/104

Installation Guide

Edition: 1.0

AR-ES5630FL Installation Guide

Contents

1

Introduction of AR-ES5630FL………..…………………………………

3

1.1 Product Outlines……………………………………………………..

4

1.2 Packing List……………………………………………………….…

5

2

Procedure of Assembly/Disassembly cables from the board……………

6

2-1 Installing an memory card to AR-ES5630FL………………….……

6

2-2 Installing the 2.5”Hard Disk Drive (HDD)………………………….

7

2-3 Inserting a Compact Flash Card……………………………………..

10

AR-ES5630FL Installation Guide

1. Introduction of AR-ES5630FL

Welcome to the AR-ES5630FL fan less & dustproof products, in which a Single Board

Computer with low power Pentium M T7500/Celeron M 550 processor designed-in. The

system is designed for extreme environment with of operating range from 0℃ to 50℃.

For this product feature, AR-ES5630FL can make a lot of outdoor applications available,

such as Traffic Control, Vehicle Computer, Remote Workstation, Outdoor Data

Acquisition, Aviation or Military industries.

ACROSSER’s Extended temperature products are almost choosing the wide operating

temperature components (compliance with Industrial standard in operating temperature)

onboard. This platform has fully loaded and pass robust thermal cycling tested. It is a

reliable, long lifetime and cost effective extended temperature solution for diverse

applications.

The AR-ES5630FL provides on chip VGA, which provides up to 2048x1530x32bpp at

60Hz resolutions. And the VGA memory is shared with the main memory (1M or 8M). In

addition, the Dual Channel LVDS are supported for the users to use either with the single

channel LVDS interface supporting 1*18-bpp/ 1*24bpp or Dual channel LVDS interface

supporting 2*18-bpp / 2*24bpp.

The AR-ES5630FL is loaded with special on-board features that rival full-size systems. It

has two-network controller on board, uses BCM 5787MKMLG LAN controller, a fully

integrated 10/100/1G BASE-TX solution with high performance networking functions.

Supports Compact Flash™ Type II interface. Plus optional support for HDA sound with

CD-input. The AR-ES5630FL also includes one 200-pin SO-DIMM DDR sockets for up

to 2GB total on-board memory. The AR-ES5630FL has four on-board serial ports, 2 USB

ports, and tough industrial grade construction. All these features make the AR-ES5630FL

a very "system integrator friendly" solution, perfect for handling applications in the

harshest unmanned environments.

AR-ES5630FL Installation Guide

1.1 Product Outlines

Description AR-ES5630FL Serial

CPU Board AR-B5630 series

Dimensions 251×165×67 (mm)

AR-ES5630FL product outlines

AR-ES5630FL Installation Guide

1.2 Packing List

Description Q’ty

AR-ES5630FL 1

Power Cord / Adapter 1

2.5” anti-shock HDD mounting kit 1

HDD Cable 1

KB/MS Cable 1

Mounting bracket 2

Mounting bracket Screw 4

CD 1

Quick Guide (AR-B5630) 1

AR-ES5630FL Installation Guide

2. Procedure of Assembly/Disassembly

2-1 Installing an memory card to AR-ES5630FL

The following are step-by-step for installing SO-DIMM

1. Remove the power Cord out from the AR-ES5630FL.

2. Unlock the two screws on the back cover.

3. Unlock two screws from the DIMM bracket.

4. Insert the SO-DIMM module into the SO-DIMM socket.

5. Re-cover the DIMM bracket and tight the two screws on DIMM bracket.

6. Tight the two screws on bottom case door.

AR-ES5630FL Installation Guide

2-2 Installing the 2.5” Hard Disk Drive (HDD)

The following are step-by-step for installing 2.5”HDD device

7. Remove the power Cord out from the AR-ES5630FL.

8. Put the HDD on the HDD bracket and screw them together via four screws.

9. Insert the anti-vibration rubbers into the four edge of HDD bracket bay.

10. Remove the back cover of AR-ES5630FL by unlocking the two screws.

AR-ES5630FL Installation Guide

11. Place the HDD module into the space and assemble them together with

the case via the fire screws.

12. Unlock the two screws on the right side door.

13. Unlock the four screws on the top case.

AR-ES5630FL Installation Guide

14. Route the HDD cable through and pass the main board to the upper side

for the HDD module.

15. Plug the HDD cable into the 44-pin header connectors of the main board.

16. Lock the door screws in system top case, bottom case and right side door.

AR-ES5630FL Installation Guide

2-3 Install a Compact Flash Card

The following are step-by-step installation

1. Remove the power Cord out from the AR-ES5630FL.

2. Unlock the two screws from the CF door located on the front panel.

3. Remove the CF holder.

4. Place a Compact Flash card with OS or application program inside into

the CF holder.

5. Back the CF module to the CF slot and lock the CF slot with 2 screws to

the front panel.

1
2
3
4
5
6
7
8
9
10

Acrosser Technology AR-ES5630FL Owner's manual

Brand: Acrosser Technology

Model: AR-ES5630FL

Type: Owner's manual

Related papers

Other documents