Real Fyre Split Oak Low Profile Set Owner's manual

Type
Owner's manual

This manual is also suitable for

Real Fyre Split Oak Low Profile Set

Real Fyre Split Oak Low Profile Set is a gas log set that is designed to be used with a Peterson burner system. It is important to use only Real Fyre burners and valves with this log set, as failure to do so may result in property damage or personal injury.

This log set is available in 18", 20", 24", and 30" models. All models come with a set of logs that are designed to be placed in a specific order to promote good combustion and provide a superior flame pattern and appearance.

The logs are made of a high-quality ceramic material that is designed to withstand the heat of a fire. They are also hand-painted to give them a realistic appearance.

Real Fyre Split Oak Low Profile Set

Real Fyre Split Oak Low Profile Set is a gas log set that is designed to be used with a Peterson burner system. It is important to use only Real Fyre burners and valves with this log set, as failure to do so may result in property damage or personal injury.

This log set is available in 18", 20", 24", and 30" models. All models come with a set of logs that are designed to be placed in a specific order to promote good combustion and provide a superior flame pattern and appearance.

The logs are made of a high-quality ceramic material that is designed to withstand the heat of a fire. They are also hand-painted to give them a realistic appearance.

1
LOG SET IMPORTANT INFORMATION
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
Important: Adequate ventilation is absolutely
necessary. Adequate spacing
between the logs is NECESSARY
and MUST be maintained. Some
carbon build up (sooting) may occur
where fl ames strike the logs. If carbon
build up (sooting) continues, rearrange
top logs to allow more opening(s) for
ame(s) before sooting becomes worse.
If any sooting occurs outside of the
rebox (i.e. on the walls), turn off unit
immediately and contact a qualifi ed
professional service technician.
This product is only warranted when used as part
of a Robert H. Peterson Co. vented burner system.
WARNING: Use ONLY Real Fyre burners and valves
with this Real Fyre gas log set. Failure to
do so may result in property damage or
personal injury, and will void listings,
certifi cations, and invalidate claims
made to RHP. Contact your local Real
Fyre dealer if you need more information.
This instruction contains recommended log placement for your Real Fyre log set. This instruction contains
recommended log placement for these Real Fyre logs which will promote good combustion and provide
superior fl ame pattern and appearance, when the logs are used with a Peterson burner system.
Adequate ventilation is absolutely necessary! Provided signifi cant, noticeable sooting does not occur,
some fl exibility is possible in log placement to suit your individual preference (see Important below). If you
experience a continued accumulation of black carbon (soot) on your logs it is an indication of incomplete
combustion and you should move the effected log(s) so as to minimize the fl ame contact on the effected
log(s). Please read these instructions completely and carefully.
2
CAUTION: Burn hazard! Logs will remain hot for some time after
use. If you need to reposition any log to maintain the proper
layout, use heat resistant gloves or allow logs adequate time
to cool before handling.
Failure to use Peterson burners and valves may result in a DANGEROUS
situation and in property damage, personal injury or even death; will
void listings and certifi cations; and will void any insurance coverage
by R.H. Peterson Co or our insurers.
WARNING: This gas log set is for use with R.H. Peterson Co
burners (and parts) ONLY.
L-A2-386REV 1 - 1603310820
All items for this log set are included in one (1) box.
3
Split Oak (Low Profi le Set) Placement Instructions (18" and 20" model)
CAUTION: Burn hazard! Logs will remain
hot for some time after use.
1
2
3 4
Final Log Placement
S6-18 and S6-20
PARTS LIST
1
2
5
4
5
3
IV
I
II
III
SL6-15BR
SL6-10T
SL6-9TL
SL6-9TR
20" log set shown
SL6-10T
18" SL6-18BF
20" SL6-20BF
6
6
L-A2-386
REV 1 - 1603310820
All items for this log set are included in one (1) box.
4
Split Oak (Low Pofi le Set) Placement Instructions (24" and 30" model)
CAUTION: Burn hazard! Logs will remain
hot for some time after use.
1
2
3
Final Log Placement
1
2
5
4
6
3
IV
I
II
III
SL6-9TL
6
SL6-9TR
4
S6-24 and S6-30
PARTS LIST
30" log set shown
24" SL6-24BF
30" SL6-30BF
24" SL6-20BR
30" SL6-24BR
24" SL6-13TL
30" SL6-15TL
24" SL6-13TR
30" SL6-15TR
*
*
*
*
This log is shaped differently in the 24" log set, but the log placement is the same (see II and III).
*
5
*
*
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Real Fyre Split Oak Low Profile Set Owner's manual

Type
Owner's manual
This manual is also suitable for

Real Fyre Split Oak Low Profile Set

Real Fyre Split Oak Low Profile Set is a gas log set that is designed to be used with a Peterson burner system. It is important to use only Real Fyre burners and valves with this log set, as failure to do so may result in property damage or personal injury.

This log set is available in 18", 20", 24", and 30" models. All models come with a set of logs that are designed to be placed in a specific order to promote good combustion and provide a superior flame pattern and appearance.

The logs are made of a high-quality ceramic material that is designed to withstand the heat of a fire. They are also hand-painted to give them a realistic appearance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI