CARLO GAVAZZI ION 330PRO User manual

11

1

NetTop ION 330 Series

User Manual

Version 1.0

Published September 2009

22

2

Copyright Notice:Copyright Notice:

Copyright Notice:

No part of this manual may be reproduced, transcribed, transmitted, or translated in

any language, in any form or by any means, except duplication of documentation by

the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this manual may or may not be regis-

tered trademarks or copyrights of their respective companies, and are used only for

identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:Disclaimer:

Disclaimer:

Specifications and information contained in this manual are furnished for informa-

tional use only and subject to change without notice, and should not be constructed

as a commitment by ASRock. ASRock assumes no responsibility for any errors or

omissions that may appear in this manual.

With respect to the contents of this manual, ASRock does not provide warranty of

any kind, either expressed or implied, including but not limited to the implied warran-

ties or conditions of merchantability or fitness for a particular purpose.

In no event shall ASRock, its directors, officers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of profits, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this product contains Perchlorate, a toxic

substance controlled in Perchlorate Best Management Practices (BMP) regulations

passed by the California Legislature. When you discard the Lithium battery in

California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see

www.dtsc.ca.gov/hazardouswaste/perchlorate”

ASRock Website: http://www.asrock.com

33

3

Safety instructionsSafety instructions

Safety instructions

Your system is designed and tested to meet the latest standards of safety for

information technology equipment. However, to ensure your safety, it is important

that you read the following safety instructions.

Setting up your systemSetting up your system

Setting up your system

• Read and follow all instructions in the documentation before you operate

your system.

• Do not use this product near water or a heated source such as a radiator.

• Set up the system on a stable surface.

• Openings on the chassis are for ventilation. Do not block or cover these

openings. Make sure you leave plenty of space around the system for

ventilation. Never insert objects of any kind into the ventilation openings.

• Use this product in environments with ambient temperatures between 0

o

C

and 40

o

C.

• If you use an extension cord, make sure that the total ampere rating of the

devices plugged into the extension cord does not exceed its ampere rating.

Care during useCare during use

Care during use

• Do not walk on the power cord or allow anything to rest on it.

• Do not spill water or any other liquids on your system.

• When the system is turned OFF, a small amount of electrical current still

flows. Always unplug all power, modem, and network cables from the

power outlets before cleaning thesystem.

• If you encounter the following technical problems with the product, unplug

the power cord and contact a qualified service technician or your retailer.

• The power cord or plug is damaged.

• Liquid has been spilled into the system.

• The system does not function properly even if you follow the operating

instructions.

• The system was dropped or the cabinet is damaged.

• The system performance changes.

No disassemblyNo disassembly

No disassembly

NOTE:

The warranty does not apply to products (including HDD, ODD, memory

and warranty seal) that have been damaged as a result of attempting to

disassemble/reassemble the system or modifying the hardware

configuration.

44

4

Safety cautions and warningsSafety cautions and warnings

Safety cautions and warnings

Optical Drive Safety Information

Optical drives sold with this system contains a CLASS 1 LASER PRODUCT.

CAUTION:

Invisible laser radiation when open. Do not stare into beam or view directly

with optical instruments.

WARNING:

Making adjustments or performing procedures other than those specified

in the user’s manual may result in hazardous laser exposure. Do not

attempt to disassemble the optical drive. For your safety, have the optical

drive serviced only by an authorized service provider.

Product disposal notice

IMPORTANT:

This symbol of the crossed out wheeled bin indicates that the product

(electrical and electronic equipment) should not be placed in municipal

waste. Check local regulations for disposal of electronic products.

Nordic Lithium Cautions (for lithium-ion batteries)

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer. Dispose

of used batteries according to the manufacturer’s instructions.

Installation Notices

Do not place this

product underneath

heavy loads or in an

unstable position.

Do not expose this

product to high levels

of direct sunlight,

high-humidity or wet

conditions.

Do not use or expose this

product around magnetic

fields as magnetic

interference may affect

the performance of the

product.

Do not block the air

vents to this product or

impede the airflow in any

way.

55

5

ContentsContents

Contents

1 Introduction1 Introduction

1 Introduction

......................................................................................................

...................................................

7 7

7

1.1 Package Contents.......................................................... 7

1.2 Specifications................................................................ 8

1.3 System Motherboard Components ............................... 9

1.4 Rear Panel Connections................................................ 11

1.5 System Chassis............................................................. 12

1.6 Internal System Components ........................................ 13

1.7 Remote Controller .......................................................... 14

2 System Quick Installation2 System Quick Installation

2 System Quick Installation

..........................................................

.............................

15 15

15

3 System Components Reinstallation3 System Components Reinstallation

3 System Components Reinstallation

........................

............

19 19

19

4 Installing Second HDD4 Installing Second HDD

4 Installing Second HDD

....................................................................

..................................

21 21

21

5 Driver Installation5 Driver Installation

5 Driver Installation

....................................................................................

..........................................

23 23

23

6 6

6

UTILITY MEMUUTILITY MEMU

UTILITY MEMU

......................................................................................................

...................................................

24 24

24

6.1 Instant Boot.................................................................... 24

6.1.1 Introduction .......................................................... 24

6.1.2 Installation ............................................................ 25

6.2 ASRock OC Tuner ......................................................... 27

6.2.1 Introduction .......................................................... 27

6.2.2 Installation ............................................................ 27

6.3 BADABOOM

TM

MEDIA CONVERTER (Trial version) ...... 31

6.4 CyberLink DVD Suite (Trial version, including PowerDVD,

PowerDirector, etc)....................................................... 32

6.5 Symantec Norton AntiVirus Software (Trial version) .. 34

7 BIOS S7 BIOS S

7 BIOS S

ETUP UTILITYETUP UTILITY

ETUP UTILITY

......................................................................................

...........................................

35 35

35

7.1 Introduction .................................................................... 35

7.1.1 BIOS Menu Bar .................................................... 35

7.1.2 Navigation Keys ................................................... 36

7.2 Main Screen................................................................... 36

7.3 OC Tweaker Screen...................................................... 37

7.4 Advanced Screen ......................................................... 39

7.4.1 CPU Configuration................................................ 40

7.4.2 Chipset Configuration .......................................... 41

7.4.3 ACPI Configuration ............................................... 42

7.4.4 SATA Configuration ............................................. 43

7.4.5 USB Configuration ............................................... 43

7.5 Fan Control .................................................................... 44

7.6 Boot Screen................................................................... 44

7.6.1 Boot Settings Configuration.................................. 45

66

6

7.7 Security Screen ............................................................ 46

7.8 Exit Screen .................................................................... 47

8 Software Support8 Software Support

8 Software Support

......................................................................................

...........................................

48 48

48

8.1 Install Operating System ............................................... 48

8.2 Support CD Information ................................................. 48

8.2.1 Running Support CD ............................................ 48

8.2.2 Drivers Menu........................................................ 48

8.2.3 Utilities Menu ........................................................ 48

8.2.4 Contact Information.............................................. 48

77

7

Chapter 1 IntroductionChapter 1 Introduction

Chapter 1 Introduction

Thank you for purchasing ASRock NetTop ION 330 Series, a reliable product

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

In this manual, chapter 1 and 2 contain introduction of the hardware and step-by-

step guide to the hardware installation. Chapter 3 and 4 contain the configuration

guide to BIOS setup and information of the Support CD.

Because the hardware specifications and the BIOS software might be

updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock website without further notice. You

may find the latest VGA cards and CPU support lists on ASRock website

as well. ASRock website http://www.asrock.com

If you require technical support related to this product, please visit our

website for specific information about the model you are using.

www.asrock.com/support/index.asp

1.1 Package Contents1.1 Package Contents

1.1 Package Contents

ASRock NetTop ION 330 Series ASRock Support CD ASRock Quick Start Guide

One AC Power Cord One AC/DC Adapter One HDMI to DVI Adapter

One Anti-Slip Pad Remote Controller SATA and Power Cables

(ION330HT / ION330HT-BD)

88

8

1.21.2

1.2

SpecificationsSpecifications

Specifications

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting

the setting in the BIOS, or using the third-party overclocking tools. Overclocking may

affect your system stability, or even cause damage to the components and devices

of your system. It should be done at your own risk and expense. We are not

responsible for possible damage caused by overclocking.

* Due to the CPU limitation, the actual memory size may be less than 4GB for the

reservation for system usage under Windows

®

XP, Windows

®

XP 64-bit, Windows

®

Vista

TM

, Windows

®

Vista

TM

64-bit, Windows

®

7 and Windows

®

7 64-bit.

** Blu-ray/HD-DVD disc is supported by Blu-ray/HD-DVD drive.

*** For CD-RW write type, only support 4x, 8x, 10x CD-RW DISC format.

**** For Powered eSATA function, Hot Plug function is supported in RAID / AHCI mode only.

IDE mode does not support Hot Plug function.

Processor Intel

®

Atom

TM

330 (Dual-Core CPU)

Chipset NVIDIA

®

ION

TM

graphics processor

Memory Support DDR2 800MHz, 2 x SO-DIMMs,

maximun up to 4GB *

VGA NVIDIA

®

ION

TM

Graphics, support DX10 / Full HD 1080p

** (Blu-ray / HD-DVD) playback

HDD 2.5” HDD up to 500GB, support second 2.5” HDD

(total up to 1TB)

DVD DVD Super Multi (ION 330Pro / ION 330HT)

BD Combo *** (ION 330HT-BD)

I/O 1xHDMI, 1xD-Sub VGA, 6xUSB 2.0, 1xS/PDIF, 1xPowered

eSATA/USB ****

Sound HD Audio 7.1 channel with DTS

LAN Gigabit LAN

Power 65W/19V Adapter

Volume (liters) 2.5L

Remote MCE Remote Controller (ION 330HT / ION 330HT-BD)

Controller

Weight 1.75 Kg

Dimension 195mm(W)x70mm(H)x186m(L)

WiFi 802.11b/g/n wireless LAN

(ION 330HT / ION 330HT-BD)

* For barebone system, it may not contain memory, HDD or ODD.

99

9

15

16

PCIE1

FSB800

DDRII_2

DDRII_1

RoHS

AMCP7AION-HT

EuP Ready

6

7

8

9

10

11

12

14

13

1

2

3

4

5

1.3 System Motherboard Components1.3 System Motherboard Components

1.3 System Motherboard Components

1. Clear CMOS jumper

2. Northbridge heatsink

3. Fan connector

4. SATA connector: For second HDD SATA data cable

5. J1 jumper: For second HDD SATA power cable

6. Memory socket

7. Infrared module header

8. Fan connector

9. CPU heatsink

10. CPU fan

11. Mini-PCI Express expansion slot: For WiFi module

12. CMOS Battery

13. LPC header

14. SATA connector: For ODD SATA data cable

15. ATX5V output power connector for slim ODD & 2.5” HDD

16. SATA connector: For HDD SATA data cable

1010

10

NOTE.

1. SATA and Power Connections

2. System Memory Socket Connection

3. Fan Connection

SATA & Power Connections

ODD

HDD

Connect to ATX5V Power Connector (15)

Connect to SATA Connector (14)

Connect to HDD

Connect to ODD

Connect to SATA Connector (16)

Fan connector

Rotation

+12V

Ground

Assembly

1.Sidelong insert the memory module to the outboard DIMM slot in a 30 60 angle. Then push the

memory module to vertical direction using the slot as axis. A hock clicking sound denotes that the memory

module is in place.

2.Insert the second memory module in the same way.

* Install the first memory module into the outboard slot, then install the second memory module into the

inboard slot.

3. Ensure the hocks in both sides of the DIMM are in place.

Disassembly

1.Lift the DIMM slot hook sideways using your both thumbs. When doing this, make sure to put your

forefingers between the memory module and heat sink. The memory module might be damaged when it flips

out with extra force.

2.When the memory flips out, remove it in 60 angle;

3.Remove the outboard memory module in the same way.

* Remove the inboard memory module first, then the outboard one.

1111

11

1.4 Rear Panel Connectinos1.4 Rear Panel Connectinos

1.4 Rear Panel Connectinos

17

20

22

24

25

26

HDMI

19

21

S/PDIF

18

27

28

23

Powered

eSATA

SONY

MP3

or

17. DC-In jack

18. Optical S/PDIF Out port

19. Mic In (Pink): Microphone

20. Front L/R Out (Lime): Stereo speakers or headphones

21. HDMI connector

22. Powered eSATA/USB connector

23. Display (VGA) port

24. USB2.0 ports: USB devices

25. LAN (RJ-45) port: Local Area Network

26. Line In (Blue) for 2/4/6 channel; Rear (Blue) for 8 channel

27. Center/LFE (Orange): Center / subwoofer speakers

28. Side port for side speakers

USB

1212

12

1.5 System Chassis1.5 System Chassis

1.5 System Chassis

Opening the system chassis

1. Remove the screws on the backside.

2. Slide the top panel backwards.

29

31

30

HDMI

F

29. Optical Disc Drive

30. Drive activity indicator

31. Power ON/OFF button with status indicator

1313

13

1.6 Internal System Components1.6 Internal System Components

1.6 Internal System Components

Optical disc & Hard disk drives

The optical disc and hard disc drives are mounted in a drive cage. The

cage can be removed by removing the top screws.

32. System Cooling Fan

33. Optical Disc Drive

34. Hard Disc Drive

32

33

34

1414

14

1.7 R1.7 R

1.7 R

emote Controller (ION330HT / ION330HTemote Controller (ION330HT / ION330HT

emote Controller (ION330HT / ION330HT

-BD)-BD)

-BD)

Some remote controller functions listed above are only available with the

relative hardware equipments. If the hardware equipments you adopt are not

compatible with the system, you are not allowed to use these functions. This

product is designed to meet MCE standards.

1515

15

Chapter 2 System Quick InstallationChapter 2 System Quick Installation

Chapter 2 System Quick Installation

1. Connecting USB Devices (USB2.0 Ports)

2. Connecting VGA Monitor (Display (VGA) Port)

4. Connecting HDMI Device (HDMI Port)

3. Connecting the Network (LAN (RJ-45) Port)

1616

16

5. Connecting eSATA / USB Device (Powered eSATA/USB Port)

or

7. Connecting Stereo Speakers or Headphones (Front L/R Out Port)

6. Connecting External Audio Device

(Line In Port for 2/4/6 Channel; Rear Port for 8 Channel)

8. Connecting Microphone (Mic In Port)

1717

17

9. Connecting Center / Subwoofer Speakers (Center/LEF Port)

11. Connecting Optical Device (Optical S/PDIF Out Port)

12. Connecting Power (DC-In Jack Port)

10. Connecting Side Speakers (Side Port for 4/6/8 Channel)

1818

18

13. Power on the System (Power Switch)

1919

19

Chapter 3 System ComponentsChapter 3 System Components

Chapter 3 System Components

ReinstallationReinstallation

Reinstallation

1. Remove the cover screws on the rear panel.

2. Slide the side cover toward the rear panel and pull the side cover

upwards.

Note: For safety reasons, please ensure that the power cord is

disconnected before opening the case.

3. To change the storage drives, you need to remove SATA and power

cables from ODD / HDD first, and unscrew the screws from both side.

4. Pull ODD / HDD rack backwards and take it out from the bay.

2020

20

5. Unscrew the screws from the side of ODD / HDD rack, and change your

required ODD / HDD.

6. Refer to above steps to place the new ODD / HDD to the chassis.

Replace the side cover and fasten the screws.

Page is loading ...

CARLO GAVAZZI ION 330PRO User manual

CARLO GAVAZZI ION 330PRO User manual

Other documents