Sony BDV-N790W Owner's manual

Category
Home audio sets
Type
Owner's manual

This manual is also suitable for

Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
BDV-N890W
BDV-N890W
BDV-N790W
Blu-ray Disc™/DVD Home Theatre System
Start here
Quick start guide
GB
BDV-N790W
2
3
4
5
1
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
What’s in the box/Setting up the speakers
Connecting your TV
Connecting other devices
The on-screen Easy Setup
Playing a disc and using other functions
Main unit
Front speakers
Surround speakers
Center speaker
Subwoofer
Surround amplifier
BDV-N890W
BDV-N790W
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
03
(TDM-iP30)
or
What’s in the box
R6 (size AA) batteries (2)
Remote
Screws (2)
(BDV-N890W)
Screws (6)
(BDV-N890W)
Speaker-bottom covers (2)
(BDV-N890W)
Dock for iPod/iPhoneFM wire antenna (aerial) Calibration mic Video cord
USB cable Wireless transceivers (2)
Speaker cords (2)
(BDV-N890W)
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
04
Main unitCENTER
SUR R
FRONT RSUBWOOFER FRONT L
SUR L Surround amplier
Start by positioning the speakers
according to the labels on the
rear panel.
1
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
05
Next, connect the speakers to
the main unit and surround
amplifier.
For BDV-N890W, refer to the
supplied “Speaker Installation
Guide” for assembling the
speakers.
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
06
Insert the wireless transceivers
into the main unit and surround
amplifier for a cable-free
connection.
1
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
07
To enjoy high-quality video and
audio, connect via a High Speed
HDMI cable (not supplied).
If your TV has no HDMI ARC jack,
you also need a digital optical
cord (not supplied) to enjoy
TV sound through the system
speakers.
2
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
08
To connect your set-top box, game
console, or digital satellite receiver,
simply connect with an HDMI cable
.
For FM radio, connect the supplied
wire antenna (aerial) and extend it
for the best reception.
You can also connect your iPod or
iPhone to the system and your TV
via the supplied dock.
or
3
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
09
You can connect to the Internet
and home network via a wireless
LAN or LAN cable (not supplied).
Network settings can be found in
the home menu (page 14).
For further details, visit:
http://support.sony-europe.com/
To a broadband router
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
10
Connect the AC power cords
(mains leads) of the main unit
and surround amplifier to a wall
outlet (mains).
3
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
11
Connect the calibration mic and
place where you would normally
sit.
This will be used to optimize
the speakers in the next section
to give you the best possible
surround sound experience. The
mic can be fully removed once
this process is complete.
4
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
12
///,
/
Once [Easy Initial Settings are
complete.] appears on the
screen, select [Finish] and the
system is ready to use.
To ready the system for use,
go through the on-screen Easy
Initial Settings using the supplied
remote. This should only take a
few minutes.
If the setup screen is not
displayed, select the correct AV
input in your TV.
Press / to turn the system on.
“SETUP” appears in the front
panel display.
4
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
13
To play a disc, simply insert one
into the disc slot with the labeled
side facing the front. To eject
it, press . The LINK/STANDBY
indicator on the surround
amplifier turns green.
If playback does not start
automatically, select
in the
[Video],
[Music], or [Photo]
category, and press
.
Enjoy!
5
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
14
You can make network
settings via this menu
when the main unit
is connected to a
broadband router.
HOME
Examples:
Listen to the radio through the systems
speakers
Preset radio stations
Access Internet content
Play your iPod or iPhone through the
systems speakers
To access more features, simply press
HOME.
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
15
Presetting radio stations
1 Press FUNCTION repeatedly
until “FM” appears in the front
panel display.
2 Press and hold TUNING +/–
until auto scanning starts.
3 Press OPTIONS.
4 Press / to select [Preset
Memory], then press .
5 Press / to select the preset
number you want, then press
.
6 Repeat Steps 2 to 5 to store
other stations.
Selecting a preset station
1 Press FUNCTION repeatedly
until “FM” appears in the front
panel display.
2 Press PRESET +/– repeatedly to
select the preset station.
FUNCTION
FUNCTION
BDV-N890W
BDV-N790W
TUNING +/–
TUNING +/–
OPTIONS
OPTIONS
PRESET +/–
PRESET +/–
HOME
HOME
///,
///,
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
16
Troubleshooting
If you experience any of the following difficulties while using
the system, use this troubleshooting guide to help remedy the
problem before requesting repairs.
Also consult the Operating Instructions on the following website:
http://support.sony-europe.com/
The power does not turn on.
Check that the AC power cord (mains lead) is securely
connected to the wall outlet (mains).
The system does not work normally.
Disconnect the AC power cord (mains lead) from the wall
outlet (mains), then reconnect after several minutes.
The system does not output sound of the TV program when
connected to a set-top box.
Check the connections.
Select the correct input of the system to which the set-top box
is connected.
There is no sound or wireless transmission is not activated.
Check the status of the LINK/STANDBY indicator on the
surround amplifier.
ˎ
Turns off.
ē
Check that the AC power cord (mains lead) of the surround
amplifier is connected securely.
ē
Turn the surround amplifier on by pressing / on the
surround amplifier.
ˎ
Flashes green quickly.
ē
Press / on the surround amplifier. Insert the
wireless transceiver into the surround amplifier correctly.
Press / on the surround amplifier.
ˎ
Flashes red.
ē
Press / to turn off the surround amplifier, and check the
following items.
Are the + and – speaker cords short-circuited?
Is anything blocking the ventilation opening of the
surround amplifier?
After checking the above items and fixing any
problems, turn on the surround amplifier. If the cause
of the problem cannot be found even after checking all
the above items, consult your nearest Sony dealer.
ˎ
Flashes green or orange slowly or turns red.
ē
Make sure that the wireless transceiver is inserted correctly
into the main unit.
ē
Sound transmission is poor. Move the surround amplifier
so that the LINK/STANDBY indicator turns green or orange.
ē
Move the system away from other wireless devices.
ē
Avoid using any other wireless devices.
ˎ
Turns green or orange.
ē
Check the speaker connections.
A disc does not play.
The region code of the disc does not match the system.
Moisture has condensed on the lenses inside the main unit.
Remove the disc and leave the main unit turned on for about
half an hour.
The disc is not correctly finalized.
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
17
Reducing power usage to less than 0.3 W in
Standby Mode
Press HOME, and then press /// to select [Setup] in [System
Settings]. Check that the following settings are made:
ˎ
[Control for HDMI] in [HDMI Settings] is set to [Off].
ˎ
[Quick Start Mode] is set to [Off ].
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
Sony BDV-N890W/N790W [GB] 4-418-168-12 (1)
This quick start guide saves paper
To save natural resources, Sony has drastically reduced paper by no longer including full
printed manuals. However, full operating instructions, and more, can be found online:
http://support.sony-europe.com/
2012 Sony Corporation Printed in Malaysia
4-418-168-12(1)
(1)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Sony BDV-N790W Owner's manual

Category
Home audio sets
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI