Sony DSC-S40 is a versatile digital camera that allows you to capture stunning still images and record memorable videos. With its user-friendly interface, you can easily select various shooting modes, including Scene Selection, to optimize your shots for different scenarios like portraits, landscapes, or night scenes. The camera also features a built-in flash for low-light conditions and a self-timer function for hands-free photography. Additionally, you can use the optical zoom to get closer to your subjects and achieve beautiful close-ups.
Sony DSC-S40 is a versatile digital camera that allows you to capture stunning still images and record memorable videos. With its user-friendly interface, you can easily select various shooting modes, including Scene Selection, to optimize your shots for different scenarios like portraits, landscapes, or night scenes. The camera also features a built-in flash for low-light conditions and a self-timer function for hands-free photography. Additionally, you can use the optical zoom to get closer to your subjects and achieve beautiful close-ups.
2-589-974-11 (1)
© 2005 Sony Corporation Printed in Japan
Printed on 100% recycled paper using VOC
(Volatile Organic Compound)-free vegetable
oil based ink.
continued on the reverse
Digital Still Camera
Operating Instructions
Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate
volume) thoroughly, and retain it for future reference.
Refer to “User’s Guide/Troubleshooting”
(separate volume)
Explains advanced techniques and what to do if you experience trouble with
your camera.
Read This Firs
t
Read This Firs
t
DSC-S40
http://www.sony.net/
Checking the accessories supplied
A “Memory Stick” is not
supplied.
The camera has the own
internal memory (32
MB), however, purchase
of a “Memory Stick” is
recommended.
• R6 (size AA) alkaline batteries (2)
• CD-ROM (Cyber-shot
application software) (1)
• Operating instructions for
digital still camera “Read
This First” (this manual) (1)
• Operating instructions
“User’s Guide/
Troubleshooting” (1)
• USB cable (1)
• Wrist strap (1)
Note before use
• The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to
apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc.
Additional information on this product and answers to frequently asked questions can be
found at our Customer Support Website.
Hook
Prepare the battery
1
1
Using alkaline batteries
Read “On alkaline batteries (supplied)/Oxy Nickel Primary Battery (not supplied)” carefully. t
“User’s Guide/Troubleshooting” (page 85)
Using batteries other than the supplied ones
You can use HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries/ZR6 (size AA) Oxy
Nickel Primary Battery. t “User’s Guide/Troubleshooting” (page 85)
• Nickel-Metal Hydride batteries can be charged repeatedly for use.
Using the AC Adaptor
You can connect the camera using the AC-LS5K AC Adaptor (not supplied). t “User’s Guide/
Troubleshooting” (page 15). Refer to the operating instructions supplied with the AC Adaptor.
To check the remaining battery time
Press POWER to turn on and check the time on the LCD screen.
To remove the batteries
Hold the camera with the battery cover facing upward, then open the battery cover and remove
the batteries. Be careful not to drop the batteries.
Battery
remaining
indicator
Battery
remaining
guidelines
Sufficient
power
remaining
Battery half full Battery low,
recording/
playback will
stop soon.
Replace the batteries with
new ones, or fully charged
Nickel-Metal Hydride
batteries. (The warning
indicator flashes.)
• The displayed time remaining may not be correct under certain circumstances.
• When using alkaline batteries/Oxy Nickel Primary Battery, the battery remaining indicator may not display
the correct information.
• When the AC Adaptor (not supplied) is used, the battery remaining indicator is not displayed.
Turn the camera on/set the clock
2
2
1 Select . 2 Press POWER.
POWER
2005
/:
/
1 1
12 00
AM
OK
Cancel
Clock Set
D/M/Y
M/D/Y
Y/M/D
Lighting
3 Set the clock with the control button.
1 Select the date display format with v/V, then press z.
2 Select each item with b/B and set the numeric value with
v/V, then press z.
3 Select [OK] with B, then press z.
• To cancel, select [Cancel] and press z.
2005
/:
/
1 1
12 00
AM
OK
Cancel
Clock Set
D/M/Y
M/D/Y
Y/M/D
2005
/:
/
1 1
12 00
AM
OK
Cancel
Clock Set
D/M/Y
M/D/Y
Y/M/D
2005
/:
/
1 1
10 30
AM
OK
Cancel
Clock Set
D/M/Y
M/D/Y
Y/M/D
To change the date and time
Select [Clock Set] in the (Setup) screen and perform the procedure in step 3 above.
t “User’s Guide/Troubleshooting” (page 50)
On the clock display
• If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
When turning on the power
• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.
• Do not touch the lens portion as the cover opens and the lens portion extends. Also, do not leave the camera
with the lens portion extended for a long period of time with the power off as this may cause malfunction.
• The following screen appears when the camera is turned on for the second time or afterwards.
To turn off the power
Press POWER again.
• If the camera is running on battery power and you do not operate the camera for a period of time, the camera
turns off automatically to prevent wearing down the battery (Auto power-off function).
Changing the language setting
You can change the screen display to show messages in a specified language. To change the
language setting, press MENU to display the menu screen. Select (Setup) with the control
button, then, select [ Language] in (Setup1), and select the desired language. t “User’s
Guide/Troubleshooting” (page 49)
VGA
96
S AF
A
1
Insert a “Memory Stick” (not supplied)
Select the image size for use
Insert the “Memory Stick” all the way in until it clicks.
When there is no “Memory Stick” inserted
The camera records/plays back images using the internal memory (32 MB). t “User’s Guide/
Troubleshooting” (page 22)
3
3
Terminal side
4
4
2 Press (Image Size).
3 Select the size with v/V.
• The screen above is for still images.
For movies, select [640(Fine)] (“Memory Stick
PRO” only), [640(Standard)] or [160].
4 Press (Image Size) to
complete the setting.
1M
3M
3:2
4M
1M
Image Size
VGA(E-Mail)
1 Select a mode.
Still image:
Select .
Movie:
Select
.
button
On still image sizes
For details on the image size t “User’s Guide/Troubleshooting” (page 13)
*Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc.
On recordable number of still images and recordable time of movies
Recordable number of still images and recordable time of movies vary depending on the image
size selected.
For details on recordable number or time t “User’s Guide/Troubleshooting” (page 21)
• Number of recordable images and time can differ according to shooting conditions.
To remove a “Memory Stick”
When the access lamp is lit
Never open the battery cover/“Memory Stick” cover or turn off the power. The data may be
corrupted.
Image size Guidelines No. of images Printing
4M (2304×1728)
(the default setting)
For printing high density images in A4 or
A5 size
Less
More
Fine
Rough
3:2 (2304×1536)*
3M (2048×1536)
1M (1280×960) For printing in postcard size
For recording a larger number of images
For attaching images to e-mail or creating
web pages
VGA(E-Mail)
(640×480)
Still images Movies
Maximum recordable image Maximum recordable time
Open the “Memory Stick” cover, then push the “Memory
Stick” in once.
VGA
196
1/30”
Access lamp
Insert the batteries.
1
2
2
1
While pressing OPEN, open the cover.
Match 3/# and insert.
Close the cover.
(X:100.0%, Y:100.0%) Created with Grafikhuset CMYK PDF Creator for SOHC2 at Sony Human Capital.
Zoom button
Shoot images easily (Auto adjustment mode)
5
5
Using the control button
Holding the camera
Position the subject in the center of the focus
frame.
VGA
98
S AF
FINE
P
VGA
96
SAF
10:30
PM
2005 1 1101
-
0029
Review
8/8
VGA
RETURN
VGA
96
SAF
Using the flash for
still images
Selecting the
metering mode
Checking the last
image you shot
(Quick Review)
Using the
self-timer
Using the zoom
• You cannot change the zoom scale while shooting a movie.
• When the zoom scale exceeds 3×, the camera uses [Digital Zoom].
For details on the [Digital Zoom] settings and the image quality t “User’s Guide/Troubleshooting” (page
42)
2 Shoot with the shutter button.
Still image:
Press and hold
halfway down to
focus
AE/AF lock indicator
Flashing t lit/beeps
Press fully down
The shutter sounds.
Movie:
Press fully down
To stop recording, press the shutter button fully down again.
96
VGA
FINE
F2.830
SAF
AF range finder frame
00:00:02[00:10:48]
STD
640
REC
T
W
T
W
96
VGA
S AF
96
VGA
1.1
5.0
S AF
Zoom button
Checking the last still image you shot (Quick Review)
Press b ( ) on the control button.
To cancel, press b again.
• The image may appear rough right after playback starts.
• To delete the image, press (Delete) and select [Delete] with v on the control button, then press z.
Selecting a flash mode for still images
Before step 2, press v ( ) on the control button repeatedly until the desired mode is selected.
• Shooting distance (when [ISO] is set to [Auto])
W side: Approx. 0.2 to 3.8 m (7 7/8 to 12 feet 5 19/32 inches)
T side: Approx. 0.5 to 2.1 m (19 11/16 to 6 feet 10 11/16 inches)
• The flash strobes twice. The first time is to adjust the light quantity.
Selecting the metering mode
You can select the metering mode that sets which part of the subject to measure to determine the
exposure.
Spot metering ( )
Metering is performed for only a part of the subject. This is convenient when the subject is
backlit or when there is strong contrast between the subject and the background.
Multi-pattern metering (No indicator)
This image is divided into multiple regions and metering is performed for each region. The
camera determines a well-balanced exposure.
Before Step 2, set (Camera) to other than [Auto] t “User’s Guide/Troubleshooting”
(page 24)
Press B ( ) on the control button. To cancel spot metering, press B again.
• When using spot metering, to focus on the metering position, setting 9 (Focus) to [Center AF] is
recommended t “User’s Guide/Troubleshooting” (page 28)
No indicator Strobes if it is dark or against light (default setting)
Forced flash
Slow synchro (Forced flash)
The shutter speed is slow in a dark place to clearly shoot the background
that is out of flash light.
No flash
SL
VGA
98
S AF
FINE
P
Spot metering cross hair
Position the subject here.
Using the self-timer
Before step 2, press V ( ) on the control button.
Press the shutter button, the self-timer lamp flashes with counting sound until the shutter
operates (approximately 10 seconds later).
If you shoot a still image of a subject that is difficult to focus on
• When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing
slowly and the beep does not sound. Recompose the shot and focus again.
Subjects difficult to focus on are:
To identify items on the screen
t “User’s Guide/Troubleshooting” (page 16)
To turn off the LCD screen
Press (Display/LCD on/off) repeatedly. Use the finder for saving battery power, or
shooting images when it is difficult to confirm images using the LCD screen.
Self-timer lamp
–Distant from the camera and dark
–The contrast between the subject and its
background is poor.
–Seen through glass
–Moving fast
–Reflect light or have a lustrous finish
– Flashing
–Against light
button
Shoot still images (Scene Selection)
To cancel the Scene Selection
Select [Auto] or [Program] with v/V.
2 Press MENU.
3 Select the desired mode of
Scene Selection.
1 Select (Camera) with b.
2 Select the desired mode of Scene Selection
with v/V.
• For details on modes, see below.
• The mode selected here is maintained even when the
power is turned off.
Camera
Mode
Auto
Program
Mode
Camera
Auto
Program
ISOWB
Camera
Auto
Program
1 Select .
4 Shoot with the
shutter button.
Scene Selection modes
The following modes are predetermined to match the scene conditions.
*The shutter speed becomes slower, so using a tripod is recommended.
To use the functions set by the control button with Scene Selection
Before shooting in step 4, select the settings with the control button. Some functions are not
available, depending on the Scene Selection mode. When you press the button to select functions
that cannot be combined with Scene Selection, a beep sounds. t “User’s Guide/
Troubleshooting” (page 25)
Snow Candle*
Shoots whitish scenes brightly. Shoot candlelit scenes, without
spoiling the atmosphere.
Beach Twilight portrait*
Shoots seasides or lakesides, the
blue of the water clearly recorded.
Shoots portraits in dark places.
Landscape Twilight*
Shoots landscapes, etc., by
focusing on a distant subject.
Shoots night scenes at a distance
without losing the dark
atmosphere of the surroundings.
Soft snap
Shoots portraits of people,
flowers, etc., with a gentle
atmosphere.
View/delete images
To delete images
1 Display the image you want to delete and press (delete).
2 Select [Delete] with v, then press z.
To cancel the deletion
Select [Exit], then press z.
6
6
1 Select . 2 Select an image with b/B.
Still image: the image size is displayed
Movie: is displayed
To play back a movie, press z.
• Movies with the image size [160] are displayed a size
smaller.
Movie:
BACK/NEXT VOLUME
10:30
PM
2005 1 1101
-
0003
VGA
00:00:03
10:30
PM
2005 1 1101
_
0010
STOP REV/CUE VOLUME
10/10
STD
640
Playback bar
Rewind/Fast forward: b/B
(Return to normal playback: z )
Vo l u m e : v/V
Stop playback: z
B
Control button
button
/button
button
Delete
Exit
BACK/NEXT
VGA
2/9
To view an enlarged image (playback zoom)
While displaying a still image, press to zoom in on the image.
To undo the zoom, press .
Adjust the portion: v/V/b/B
Cancel playback zoom: z
To store enlarged images: [Trimming] t “User’s Guide/Troubleshooting” (page 40)
Viewing an index screen
Press (index), then select an image with v/V/b/B.
To return to the single-image screen, press z. To display the next (previous) index screen, press
b/B.
To delete images in index mode
1 While an index screen is displayed, press (Delete) and select [Select] with v/V on the
control button, then press z.
2 Select the image you want to delete with v/V/b/B, then press z to display the (Delete)
indicator on the selected image.
To cancel a selection
Select an image you have previously selected for deletion, then
press z to delete the indicator from the image.
3 Press (Delete).
4 Select [OK] with B, then press z.
• To delete all the images in the folder, select [All In This Folder] with v/V in step 1 instead of [Select], then
press z.
10:30
PM
2005 1 1101
-
0003
BACK/NEXT VOLUME
SINGLE DISPLAY
SINGLE DISPLAY
VGA
3/9
TO NEXTSELECT
Control button
1 Select a mode.
Still image (auto adjustment mode):
Select .
Movie:
Select .
(X:100.0%, Y:100.0%) Created with Grafikhuset CMYK PDF Creator for SOHC2 at Sony Human Capital.
-
1
-
2
Sony DSC-S40 is a versatile digital camera that allows you to capture stunning still images and record memorable videos. With its user-friendly interface, you can easily select various shooting modes, including Scene Selection, to optimize your shots for different scenarios like portraits, landscapes, or night scenes. The camera also features a built-in flash for low-light conditions and a self-timer function for hands-free photography. Additionally, you can use the optical zoom to get closer to your subjects and achieve beautiful close-ups.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sony Cyber-SHOT DSC-H1 Owner's manual
-
-
-
-
-
Sony DSC-S600 User guide
-
-
-
-