Dwyer Series DPMW User manual

Series DPMW
Dwyer
Brand
Dwyer
Model
Series DPMW
Type
User manual

Dwyer Series DPMW is a digital panel meter designed to provide accurate and reliable measurements of various parameters such as pressure, level, flow, and temperature. It features a high-contrast LCD display with user-selectable engineering units, decimal point position, and adjustable zero and span. The meter accepts a 4 to 20 mA input signal and is powered by a 24 VDC power supply. It has a compact design for window mounting and is easy to install. The Series DPMW is suitable for use in industrial, commercial, and residential applications.

Dwyer Series DPMW is a digital panel meter designed to provide accurate and reliable measurements of various parameters such as pressure, level, flow, and temperature. It features a high-contrast LCD display with user-selectable engineering units, decimal point position, and adjustable zero and span. The meter accepts a 4 to 20 mA input signal and is powered by a 24 VDC power supply. It has a compact design for window mounting and is easy to install. The Series DPMW is suitable for use in industrial, commercial, and residential applications.

Series DPMW LCD Digital Panel Meters
Specifications - Installation and Operating Instructions
Bulletin E-90-DPMW
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
SPECIFICATIONS
Inputs: 4 to 20 mA.
Input Impedance: 300Ω nominal.
Accuracy: ±(0.1% FS + 2 count).
Power Supply: Powered by control loop.
Backlight Power Supply: 24 VDC @ 35 mA typical.
Span and Zero: Adjustable. (± 1999).
Display: 3-1/2 digits, 7 segments, 0.45˝ (11.4 mm) H.
Decimal Points: 3-position, user selectable.
Engineering Units: DPMW-XXX: °F, °C, %, PSI; DPMW-XXXP: V, A,
KW, PF.
Polarity: Automatic, “-” displayed.
Operating Temperature: 32 to 122°F (0 to 50°C).
Storage Temperature: -4 to 158°F (-20 to 70°C)
Mounting: Window mount.
Connection: Screw terminals.
Conversion Rate: 3 per second.
Warm-Up: 10 minutes typical.
Weight: 2 oz (56.7 g).
Agency Approvals: RoHS.
P Models
°F
°C
P
SI
%
V
A
KW
PF
29/32
[23.1]
2-5/16
[58.7]
1
3/32
[10.2]
1-9/16
[39.7]
63/64
[
25.1]
1/8
[3]
1
/8
[3]
2
-3/8
[60.5]
17/64
[6.9]
[Ø.140]
[Ø3.6 mm]
2 PLCS
PANEL CUTOUT FOR
WINDOW MOUNTING
INSTALLATION
The Series DPMW is designed for window mounting in a 2.31˝ (58.4
mm) W x .91˝ (22.9 mm) H panel cutout.
WIRING
The unit is powered by a 4-20 mA loop and the screw terminals for wiring
are located on the back of the adder board marked with + SIG -. The
backlighting requires a 24 VDC power supply and should be connected
to terminals identified with + B/L -.
Note: If backlight supply is not loop supply, ground should be referenced
together.
The Series DPMW LCD Digital Panel Meter is designed with a 3-1/2
digit, high contrast LCD display. The colored segments are available in
red, amber, or green - ideal for viewing at a distance. The Series DPMW
features user selectable engineering units, selectable decimal point
position and adjustable zero and span. The meter accepts a 4 to 20 mA
input signal for pressure, level, flow, and temperature transmitter. A 24
VDC power supply is required to illuminate the colored segments. The
series DPMW can be quickly installed in a window cutout.
REAR VIEW
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/872-9057 e-mail: [email protected]
©Copyright 2014 Dwyer Instruments, Inc. Printed in U.S.A. 5/14 FR# R2-443464-00 Rev. 3
OPERATION
Selecting Engineering Units
Four sets of jumper pins are located in the back of the meter, between the
meter and the adder board. Move the jumper to fit over the appropriate pins
which correspond to the desired engineering units. See Figure 1.
Selecting Decimal Point Position
Four decimal point positions are available on the digital panel meter. Move
the jumper to correspond to the desired decimal point location. See Figure
2.
Setting Min/Max Display Value J1, J2, J3 (See Figure 3 & 4):
If:
The minimum display is ≤ 0 or
Minimum display is > 0 and the (maximum display minimum display) >
5; The J1, J2 & J3 should be all set to the top jumper (see Figure 3).
If:
The minimum display is > 0 and the (maximum display minimum display)
< 5; The J1, J2 & J3 should be all set to the bottom jumper (see Figure 4).
MAINTENANCE/REPAIR
Upon final installation of the Series DPMW, no routine maintenance is
required. The Series DPMW is not field serviceable and should be returned
if repair is needed. Field repair should not be attempted and may void
warranty.
WARRANTY/RETURN
Refer to “Terms and Conditions of Sale” in our catalog and on our website.
Contact customer service to receive a Return Goods Authorization number
before shipping the product back for repair. Be sure to include a brief
description of the problem plus any additional application notes.
FIGURE 2
FIGURE 4
A
J3 J2
J1
B
FIGURE 3
FIGURE 1
1
*
P Models
V
A
KW
PF
1
1
3
°F
°C
PSI
%
•
•
A
J3 J2
J1
B
•
•
  • Page 1 1
  • Page 2 2

Dwyer Series DPMW User manual

Series DPMW
Dwyer
Brand
Dwyer
Model
Series DPMW
Type
User manual

Dwyer Series DPMW is a digital panel meter designed to provide accurate and reliable measurements of various parameters such as pressure, level, flow, and temperature. It features a high-contrast LCD display with user-selectable engineering units, decimal point position, and adjustable zero and span. The meter accepts a 4 to 20 mA input signal and is powered by a 24 VDC power supply. It has a compact design for window mounting and is easy to install. The Series DPMW is suitable for use in industrial, commercial, and residential applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers