Guest Bed Instructions
Step 4. Raise all legs to upright position and fasten the leg
supports into locked position, as per the top right picture.
Step 5. Turn the frame over and place the legs on the floor.
Step 2. Stand product on end and unfasten strap to unfold
product
Step 3. Place product face down on floor and place the
mattress to the side.
Step 6. Secure the mattress to the frame with the elastic
band at each end.
Step 7. Now enjoy the comfort of your new guest bed!
Guest Bed Return Policy
Guest Bed, by Zinus, believes you will absolutely love your new Guest Bed, but if for some reason you want to return the Guest Bed, please call us directly before you decide
to return your product to the retailer. Our Customer Service organization can answer most customer concerns and can assist you with any questions you may have about our
new Guest Bed. Please call us first at: 1-888-351-7651.
To return your Guest Bed, you will need to return it to your local store where your Guest Bed was originally purchased. You will need to use the original shipping box or some
other very sturdy box to return the product safely. Please follow these packing instructions carefully :a) Please fold up the foundation and mattress; b) Please put them into
the box.
1-Year Limited Warranty Statement For Manufacturing Defects
Please read this Limited Warranty carefully. To maintain your Warranty, you will need to comply with the conditions stated here. This warranty is for manufacturing defects only
and does not cover damages as a result of misuse.
1.Please be sure to complete your Product Registration Card (included with this packet) and send it to the address shown on the front of the card within 30 days of purchase.
Please maintain this Warranty Statement in a safe place along with your dated sales receipt. If you need to return your Guest Bed, please follow the specified return-policy
instructions. When moving your foundation after initial use, please remove the mattress on it and completely disassemble it (collapse the legs and fold the unit). Moving a fully
assembled Guest Bed risks bending the unit or damaging the legs, which will void your warranty.
2. Your new Guest Bed comes with a 1 year warranty against manufacturing defects that may compromise the sleep quality provided by Guest Bed. The warranty starts on the
date of purchase. No warranty will be honored without an original sales receipt. The warranty and financial responsibility of the manufacturer only applies to the Guest Bed itself
and does not extend to other mattresses that are used on the Guest Bed.
3. Manufacturing defects include circumstances where the Guest Bed has broken under normal use and no longer provides proper support for your mattress. Proper support is
defined as a smooth, flat, rigid surface. In the event you encounter a manufacturing defect, please stop using this product immediately and call customer service. Please note
that it is not uncommon for the short metal welds to become loose in transit or during normal use. A manufacturing defect for these welds is considered to be 1 or more at the
time of purchase. The manufacturer can not be responsible for improper assembly by the consumer.
4. This warranty applies only when the Guest Bed has been properly used by consumers who purchased the Guest Bed from an authorized dealer as a new product. Proper
use means using the frame on a level surface where all legs touch the floor with an equal distribution of weight. Proper use also means that the Guest Bed was not abused
by the consumer, as defined by the manufacturer, including not exceeding weight capacity of 300 pounds. The warranty period will not be extended from the original purchase
date if replacement parts are required.
5. If Guest Bed fails due to manufacturing defects, the manufacturer will repair or replace at its discretion and reserves the right to substitute comparable materials or models
and does not guarantee that the replacement part will match the existing piece or foundation.
6. In the event the Guest Bed needs to be inspected by the manufacturer to determine a warranty claim, the transportation cost or removal cost is borne by the consumer.
Set-up Instructions Take-down Instructions
Step 1. Remove the product from the box and place flat on
the floor.
/
