Pelco NET5400T User manual

Brand: Pelco

Model: NET5400T

Type: User manual

INSTALLATION

C4658M-C (6/10)

Endura

NET5400T Series

Video Encoder

C4658M-C (6/10) 3

Contents

Important Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Legal Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Supplied Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

User-Supplied Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Product Serial Number Label Placement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Equipment Placement and Rack Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Desktop Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Wall Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Rack Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Pelco Badge Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4-Channel Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2-Channel Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

1-Channel Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connecting Video Input and Output Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Connecting Video Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Connecting Looping Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Connecting Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Connecting a PTZ Device, Relay, and Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connecting a PTZ Device (Pelco D). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Connecting a Relay Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Connecting Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Connecting to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Daisy-Chaining Several Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Connecting Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Recommended Wire Gauge and Wiring Distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Front Panel Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

4-Channel Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

2-Channel Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

1-Channel Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Descriptions of the Front Panel Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

4 C4658M-C (6/10)

List of Illustrations

1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2 Product Serial Number Label Placement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3 Attaching Rubber Feet for Desktop Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4 Desktop Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5 NET5400T and WM5002-4U Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6 Tighten the Thumbscrew to Secure the Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

7 Multiple Units in an RK5200PS-5U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

8 Tighten Thumbscrew to Secure the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

9 Pelco Badge Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

10 Rear Panel for 4-Channel Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

11 Rear Panel for 2-Channel Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

12 Rear Panel for 1-Channel Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

13 Video Input and Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

14 Audio Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

15 Terminal Block Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

16 Connecting a Spectra Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

17 Connecting a Relay Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

18 Supervised Alarm Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

19 Supervised Alarm Input Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

20 Unsupervised Alarm Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

21 Unsupervised Alarm Input Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

22 Connecting Alarms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

23 Connecting to the Endura Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

24 Daisy-Chained Units Installed in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

25 Connecting Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

26 Front Panel Indicators on 4-Channel Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

27 Front Panel Indicators on 2-Channel Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

28 Front Panel Indicators on 1-Channel Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

C4658M-C (6/10) 5

List of Tables

A Video Coaxial Cable Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

B PTZ, Relay, and Alarm Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

C Serial Port Options and Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

D Power Consumption Differences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

E PoE Power Consumption Differences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

F Recommended Wire Gauge and Maximum Wiring Distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

G Troubleshooting the NET5400T Series Video Encoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

6 C4658M-C (6/10)

Important Notices

LEGAL NOTICE

SOME PELCO EQUIPMENT CONTAINS, AND THE SOFTWARE ENABLES, AUDIO/VISUAL AND RECORDING CAPABILITIES,

THE IMPROPER USE OF WHICH MAY SUBJECT YOU TO CIVIL AND CRIMINAL PENALTIES. APPLICABLE LAWS REGARDING

THE USE OF SUCH CAPABILITIES VARY BETWEEN JURISDICTIONS AND MAY REQUIRE, AMONG OTHER THINGS,

EXPRESS WRITTEN CONSENT FROM RECORDED SUBJECTS. YOU ARE SOLELY RESPONSIBLE FOR INSURING STRICT

COMPLIANCE WITH SUCH LAWS AND FOR STRICT ADHERENCE TO ANY/ALL RIGHTS OF PRIVACY AND PERSONALTY.

USE OF THIS EQUIPMENT AND/OR SOFTWARE FOR ILLEGAL SURVEILLANCE OR MONITORING SHALL BE DEEMED

UNAUTHORIZED USE IN VIOLATION OF THE END USER SOFTWARE AGREEMENT AND RESULT IN THE IMMEDIATE

TERMINATION OF YOUR LICENSE RIGHTS THEREUNDER.

REGULATORY NOTICES

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that

may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee

that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference

Problems.” This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.

Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your

authority to operate this equipment under Federal Communications Commission’s rules.

In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with

non-approved equipment or unshielded cables is likely to result in interference to radio and television reception.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

C4658M-C (6/10) 7

Video Quality Caution

FRAME RATE NOTICE REGARDING USER-SELECTED OPTIONS

Pelco systems are capable of providing high quality video for both live viewing and playback. However, the systems can be

used in lower quality modes, which can degrade picture quality, to allow for a slower rate of data transfer and to reduce

the amount of video data stored. The picture quality can be degraded by either lowering the resolution, reducing the

picture rate, or both. A picture degraded by having a reduced resolution may result in an image that is less clear or even

indiscernible. A picture degraded by reducing the picture rate has fewer frames per second, which can result in images

that appear to jump or move more quickly than normal during playback. Lower frame rates may result in a key event not

being recorded by the system.

Judgment as to the suitability of the products for users’ purposes is solely the users’ responsibility. Users shall determine

the suitability of the products for their own intended application, picture rate and picture quality. In the event users intend

to use the video for evidentiary purposes in a judicial proceeding or otherwise, users should consult with their attorney

regarding any particular requirements for such use.

8 C4658M-C (6/10)

Description

The NET5400T Series video encoder is a network-based multichannel encoder with a built-in, Web-based viewer for live

streaming to a standard Web browser (Microsoft

Internet Explorer

or Mozilla

Firefox

). The encoder features open

architecture connectivity and is also part of an Endura

system to record, manage, configure, and view multiple live

streams.

The encoder supports up to three compression formats and many resolutions for each video channel. Standard

compression formats include H.264 and JPEG. Dual streams can be configured to a variety of resolutions, frame rates, and

bit rates for each attached camera.

The encoder includes 1-, 2, and 4-channel units, and some models support a full line of video analytics for object detection

and activity detection. The 1-channel models include built-in support for the Power over Ethernet (PoE) standard, 802.3af,

while the 2-channel models include built-in support for the PoE+ standard 802.3at. This technology supplies power to the

encoder through the network. If PoE is not available, the encoder is prewired for 12 or 24 VAC, and can be powered from an

optional external power supply or directly from an optional rack mount.

The main function of the NET5400T Series encoder is to convert analog NTSC or PAL video into standard definition digital

H.264 video and JPEG video streams. It transmits these streams over an Ethernet network to other Endura system

components. These streams can be recorded on an Endura Endura NSM5200 network storage manager or other Endura

storage, or they can be decoded by the following Endura components:

• NET5402R-HD video decoder: Converts up to 32 video streams for display.

• WS5200 software: Displays up to 32 video streams on a computer monitor or on the WS5070 Endura workstation.

• VCD5200 video console display: Converts up to 32 video streams (depending on model) for display.

The NET5400T Series incorporates EnduraView

™

video optimization technology to select the best image quality and frame

rate for the target Endura product (decoder, workstation, or console), all without affecting the system recording rate. For

example, the unit selects a high rate and quality setting for recording and automatically selects a lower rate for viewing in

a multiple view format.

The NET5400T can be configured for one alarm input for each video channel and provides one relay output for the unit.

When an alarm event is triggered, the unit can send a message to an operator, trigger a relay, and start recording video.

The unit also supports activity detection for each video channel. You can configure up to three activity zones, each with its

own independent sensitivity and threshold settings. When the NET5400T detects activity in any of these areas, it can

trigger an alarm event.

The video encoder supports one audio input for each video channel over the network. The system operator (security

personnel) can see and hear activity in any target area in which a microphone is present.

The NET5400T supports control of remote peripherals such as pan/tilt/zoom (PTZ) cameras by way of Pelco D and

Coaxitron

protocols.

C4658M-C (6/10) 9

FEATURES

• Open standards-based architecture

• H.264 baseline, main, or high profile compression

• Dual-stream at up to 4CIF, 30/25 images per second (ips) per stream

• Integrated multizone video motion detection

• Integrated audio, alarm, and relay outputs

• Integrated Coaxitron and Pelco D PTZ protocols

• Support for Power over Ethernet (PoE or PoE+) on the 1- and 2-channel models

• Support for multicast transmissions

MODELS

SUPPLIED ACCESSORIES

OPTIONAL ACCESSORIES

NET5401T

One-channel H.264 encoder with Camera Sabotage

NET5401T-OS

One-channel H.264 encoder with OV Security Suite

NET5401T-OSP

One-channel H.264 encoder with OV Security Suite Plus

NET5401T-OCP

One-channel H.264 encoder with OV Event Counting Security Suite

NET5401T-I

One-channel H.264 encoder with built-in Pelco Analytics Suite

NET5402T

Two-channel H.264 encoder with Camera Sabotage

NET5402T-OS

Two-channel H.264 encoder with OV Security Suite

NET5402T-OSP

Two-channel H.264 encoder with OV Security Suite Plus

NET5402T-OCP

Two-channel H.264 encoder with OV Event Counting Analytics Suite

NET5402T-I

Two-channel H.264 encoder with built-in Pelco Analytics Suite

NET5404T

Four-channel H.264 encoder with Camera Sabotage

NET5404T-OS

Four-channel H.264 encoder with OV Security Suite

NET5404T-OSP

Four-channel H.264 encoder with OV Security Suite Plus

NET5404T-OCP

Four-channel H.264 encoder with OV Event Counting Security Suite

NET5404T-I

Four-channel H.264 encoder with built-in Pelco Analytics Suite

Mating Connectors

4-pin power connector for external power supply (not supplied);

16-pin terminal block for alarms, relays, and PTZ devices

RK5200PS-5U

Rack mount with two power supplies (12 units)

WM5200-4U

Wall mount for single unit without power supply

NET5400PS

Power supply for all models when not installed in the RK5200PS-5U

10 C4658M-C (6/10)

Before You Begin

Endura is a network system that requires a continuous amount of bandwidth to transmit true, live video; therefore, always

include your network administrator when planning and installing Endura components.

You will also need the following items:

• Pelco-approved Endura certification

• Access to an Endura network

– that is an active, Gigabit Ethernet network that supports the full Internet Protocol suite,

– that is configured with at least one Endura system manager, and

– that is configured with at least one Endura workstation.

NOTES:

• Endura components are designed to deliver high-quality, high-frame rate video across a network. For best results,

make sure your installation meets the power, environmental, and networking guidelines described in the Installation

Guidelines for Endura equipment document, which is available on the Endura partner portal.

• When using one or more network switches on the Endura network, enable autonegotiation on all switches.

• These network requirements represent the minimum standard for a small Endura-capable security network. Consult

the Endura 2.0 Network Design Guide to make sure your network is properly configured. Your system may be

different and may require additional hardware, software, and network resources.

USER-SUPPLIED PARTS

In addition to the standard tools and cables required for a video security installation, you will need to provide the following

items:

You also need to provide all network equipment, such as switches, for the Endura network.

Qty Description

1 Cat5e (or better) cable and connectors for connecting the unit to the Endura network or Cat6 cable for

connecting up to four NET5400T units in a daisy chain

1 Power supply; refer to Connecting Power on page 33 for more information

1 Analog video device (fixed or PTZ camera)

1 Monitor, if using looping video

1 Small flat-tip screwdriver, if connecting camera control, relay, or alarms

C4658M-C (6/10) 11

PACKAGE CONTENTS

The following diagram shows the box contents. When installing the unit, refer to this diagram.

Figure 1. Package Contents

NOTE: Since power requirements vary by installation, the NET5400T Series does not include an individual power supply.

You can purchase either the optional NET5400PS single-unit power supply or the RK5200PS-5U rack mount, which includes

two power supplies. Refer to Connecting Power on page 33 for more information on supplying power to the unit.

NET5400T Series Video Encoder

Installation Manual, Safety Instructions, and Quick Start Guide (1 ea.)

Resource Disc

Rubber Feet (4 ea.)

16-Pin Terminal Block (1 ea.)

4-pin Terminal Block (1 ea.)

Pelco Badge Rotation Sticker (1 ea.)

12 C4658M-C (6/10)

PRODUCT SERIAL NUMBER LABEL PLACEMENT

Product serial number labels help Pelco’s Product Support identify your system and its factory configuration in case the unit

or its components require service.

A label citing your product’s serial number is attached to the bottom panel of the unit. Because rack mounting or other

installation options may obscure the factory-applied label, two additional labels are provided. Attach one of them to your

product documentation or another product location that will not be obscured by installation. The second label is a spare.

To use these labels:

1. On the bottom panel of your unit, locate two small labels, attached with a yellow sticker that reads, “Extra serial

number labels: remove prior to installation.”

2. Remove the yellow sticker and the labels.

3. Peel away the backing from one label and attach it to this installation manual, other product documentation, or an

unobscured product location.

Figure 2. Product Serial Number Label Placement

C4658M-C (6/10) 13

Equipment Placement and Rack Mounting

Use one of the following installation methods for the unit:

• Place the unit on a flat surface, such as a shelf or desktop.

• Mount the unit to a wall using the optional WM5002-4U wall mount kit.

• Install the unit in the optional RK5200PS-5U rack mount kit.

NOTES:

• Each installation method, except the RK5200PS-5U, requires the installation of a separate power supply, either the

NET5400PS (not supplied) or other equipment supplied by the user (refer to Connecting Power on page 33).

• When installing the unit on a desktop, use the rubber feet provided with the unit to protect the desktop from surface

damage. The rubber feet are not needed when mounting the unit in a wall or rack mount.

DESKTOP INSTALLATION

To place the unit on a flat surface, such as a desktop:

1. Attach the rubber feet to the bottom of the unit to prevent surface damage.

Figure 3. Attaching Rubber Feet for Desktop Placement

RUBBER FEET

NET5401T

(POE+)

14 C4658M-C (6/10)

2. Position the unit to allow for cable and power cord clearance at the front and rear panels.

Figure 4. Desktop Placement

WALL MOUNTING

A single NET5400T Series unit can be mounted to a wall using the optional WM5002-4U wall mount system.

To mount the unit to a wall using the WM5002-4U:

1. Install the WM5002-4U; refer to the WM5000 Series Wall Mount Kit Installation manual.

2. Insert the NET5400T Series unit into the wall mount. Make sure all front and rear panel connectors are accessible.

Figure 5. NET5400T and WM5002-4U Wall Mount

WARNING: Do not place the unit unit on its side; the unit could fall over and cause damage. Placing the unit on its

side also blocks air flow and can cause the unit to overheat.

NET5401T

(

)

C4658M-C (6/10) 15

3. Tighten the thumbscrew on the wall mount to secure the unit.

Figure 6. Tighten the Thumbscrew to Secure the Unit

RACK MOUNTING

The optional RK5200PS-5U rack mount kit can support up to 12 NET5400T Series units. Each unit connects directly to a

power connector in the rack and is powered by the rack.

NOTES:

• To ensure proper rack ventilation, install a blank module (RK5001B-5U) in each empty slot.

• The RK5200PS-5U supplies only power. It does not provide a dock for any other unit connectors.

• Always leave at least 1 rack unit (RU) of space below the RK5200PS-5U unit. If another unit is installed directly above

an RK5200PS-5U, only the lower unit needs an empty rack space below it.

TIGHTEN

THUMBSCREW

16 C4658M-C (6/10)

To install the unit into a rack mount kit:

1. Install the RK5200PS-5U rack mount kit into the rack; refer to the RK5200PS-5U Rack Mount Chassis Installation

manual.

2. Insert the unit into the desired slot.

Figure 7. Multiple Units in an RK5200PS-5U

3. Tighten the thumbscrew on the rack mount to secure the unit into the rack.

Figure 8. Tighten Thumbscrew to Secure the Unit

TIGHTEN

THUMBSCREW

C4658M-C (6/10) 17

PELCO BADGE ORIENTATION

The Pelco badge on the front panel of the unit can be rotated in quarter turns. If you install the unit on a flat surface, the

Pelco badge will be turned the wrong way.

To rotate the Pelco badge:

1. Use the Pelco badge rotation sticker that came with the unit.

2. Attach the middle portion of the rotation sticker to the badge.

3. Press firmly with your thumb and rotate the badge to its correct position.

4. Remove the rotation sticker from the badge.

Figure 9. Pelco Badge Orientation

NET5401T

(POE+)

18 C4658M-C (6/10)

Connections

4-CHANNEL MODELS

Familiarize yourself with the rear panel before connecting any equipment to the unit. Refer to Connecting a PTZ Device,

Relay, and Alarms on page 24 for a description of the terminal block connections.

Figure 10. Rear Panel for 4-Channel Models

4-Pin Power

RS-422 PTZ Connections

Audio In 1 through 4

Ground

Video In 1 through 4

Ground

Relay Connections

Alarm Connections

1234

NCCNO A

1 A2 A3 A4

C4658M-C (6/10) 19

2-CHANNEL MODELS

Familiarize yourself with the rear panel before connecting any equipment to the unit. Refer to Connecting a PTZ Device,

Relay, and Alarms on page 24 for a description of the terminal block connections.

Figure 11. Rear Panel for 2-Channel Models

4-Pin Power

Video Out 2

Audio Out 1 and 2

Relay Connections

Audio In 1 and 2

RS-422 PTZ Connections

Video In 1

~í

Ground

Video Out 1

~â

Alarm Connections

Video In 2

~ä

Ground

NCCNO A1 A2 A3 A4

20 C4658M-C (6/10)

1-CHANNEL MODELS

Familiarize yourself with the rear panel before connecting any equipment to the unit. Refer to Connecting a PTZ Device,

Relay, and Alarms on page 24 for a description of the terminal block connections.

Figure 12. Rear Panel for 1-Channel Models

4-Pin Power

Relay Connections

Audio Out

RS-422 PTZ Connections

Audio In

Ground

USB (Reserved)

~í

Alarm Connections

Video In

~â

Ground

Video Out (Looping)

NCCNO A1 A2 A3 A4

Page is loading ...

Pelco NET5400T User manual

Pelco NET5400T User manual

Pelco NET5400T User manual

Related papers

Other documents