Fast Operation Guide
Set up a network connection
X5 has both wired and wireless models connected to the router. Wired connection via
the RJ45 ETHERNET port, a network cable connected directly to the router. Wireless
connection needs to be done once set up, in the future each boot can automatically
connect with the router.
The first wireless settings, you need to use on a network cable from RJ45 ETHERNET
port of X5 to the router. Plugged WiFi adapter into any USB2.0 port of X5 and power
on more than 30 seconds. Let the cellphone or computer connected to the same
network. Open the Safari browser in Apple systems or Google browser in windows.
Writeopera.local to enter user interface. If use Android system please download the
dedicated “Opera APP” (…..link).
After entering the user interface press the setup button located at the top right. Into
the network options WIRELESS NETWORK, select WiFi name, enter your password and
press “Connect”. If the upper right corner shows "Wiress restart ......",”Configuration
update……”as show below then the WiFi setting is successful.
Remove the Ethernet wire and power cable.