Pioneer DEH-2020MP User manual

Operation Manual

Mode d’emploi

CD RDS RECEIVER

AUTORADIO CD RDS

DEH-2020MP

DEH-2000MPB

DEH-2000MP

English FrançaisDeutschEspañol

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate

your model properly. After you have finished reading the instructions, keep this man-

ual in a safe place for future reference.

Before You Start

About this unit 3

Visit our website 4

Protecting your unit from theft 4

– Removing the front panel 4

– Attaching the front panel 4

Operating this unit

What’s What 5

– Head unit 5

– LCD display 5

Basic Operations 6

– Turning the unit on and selecting a

source 6

– Adjusting the volume 6

– Turning the unit off 6

Tuner 6

– Listening to the radio 6

– Storing and recalling broadcast

frequencies 7

– Tuning in strong signals 7

– Storing the strongest broadcast

frequencies 7

– Switching the RDS display 7

– Receiving PTY alarm broadcasts 8

– Selecting alternative frequencies 8

– Receiving traffic announcements 9

Built-in Player 9

– Playing a disc 9

– Repeating play 10

– Playing tracks in random order 10

– Scanning tracks or folders 10

– Pausing disc playback 10

– Using compression and BMX 10

– Searching every 10 tracks in the current

disc or folder 11

– Displaying text information on disc 11

Audio Adjustments 11

– Using balance adjustment 11

– Using the equalizer 11

– Adjusting equalizer curves 12

– Adjusting loudness 12

– Adjusting source levels 12

Other Functions 12

– Adjusting initial settings 12

– Setting the FM tuning step 13

– Switching Auto PI Seek 13

– Switching the auxiliary setting 13

– Saving the battery consumption 13

– Multi language display setting 13

– Sound muting 13

Additional Information

Error messages 14

Handling guideline of discs and player 14

Dual Discs 14

Compressed audio files 15

– Example of a hierarchy 15

– Compressed audio compatibility 15

Russian character chart 16

Specifications 17

Contents

En

2

If you want to dispose this product, do not mix

it with general household waste. There is a se-

parate collection system for used electronic

products in accordance with legislation that re-

quires proper treatment, recovery and recy-

cling.

Private households in the member states of the

EU, in Switzerland and Nor way may return their

used electronic products free of charge to desig-

nated collection facilities or to a retailer (if you

purchase a similar new one).

For countries not mentioned above, please con-

tact your local authorities for the correct method

of disposal.

By doing so you will ensure that your disposed

product undergoes the necessary treatment, re-

covery and recycling and thus prevent potential

negative effects on the environment and human

health.

About this unit

The tuner frequencies on this unit are allo-

cated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in other

areas may result in poor reception. The RDS

(radio data system) function operates only in

areas with FM stations broadcasting RDS sig-

nals.

CAUTION

! Do not allow this unit to come into contact

with liquids. Electrical shock could result.

Also, damage to this unit, smoke, and over-

heating could result from contact with liquids.

! “CLASS 1 LASER PRODUCT”

This product contains a laser diode of higher

class than 1. To ensure continued safety, do

not remove any covers or attempt to gain ac-

cess to the inside of the product. Refer all ser-

vicing to qualified personnel.

! The Pioneer CarStereo-Pass is for use only in

Germany.

! Keep this manual handy as a reference for op-

erating procedures and precautions.

! Always keep the volume low enough so that

you can hear sounds from outside the vehicle.

! Protect this unit from moisture.

! If the battery is disconnected or discharged,

the preset memory will be erased and must be

reprogrammed.

! Should this product fail to operate properly,

contact your dealer or nearest authorized

Pioneer Service Station.

About WMA

The Windows Media™ logo printed on the box

indicates that this unit can play back WMA

data.

WMA is short for Windows Media Audio and

refers to an audio compression technology

that is developed by Microsoft Corporation.

WMA data can be encoded by using Windows

Media Player version 7 or later.

Windows Media and the Windows logo are tra-

demarks or registered trademarks of Microsoft

Corporation in the United States and/or other

countries.

! This unit may not operate correctly depend-

ing on the application used to encode

WMA files.

Before You Start

En

3

English

Section

01

About MP3

Supply of this product only conveys a license

for private, non-commercial use and does not

convey a license nor imply any right to use

this product in any commercial (i.e. revenue-

generating) real time broadcasting (terrestrial,

satellite, cable and/or any other media), broad-

casting/streaming via internet, intranets and/

or other networks or in other electronic con-

tent distribution systems, such as pay-audio or

audio-on-demand applications. An indepen-

dent license for such use is required. For de-

tails, please visit

http://www.mp3licensing.com.

Visit our website

Visit us at the following site:

http://www.pioneer.co.uk

! Register your product. We will keep the de-

tails of your purchase on file to help you

refer to this information in the event of an

insurance claim such as loss or theft.

! We offer the latest information about

Pioneer Corporation on our website.

Protecting your unit from

theft

The front panel can be detached to deter theft.

Important

! Handle gently when removing or attaching

the front panel.

! Avoid subjecting the front panel to excessive

shocks.

! Keep the front panel out of direct sunlight and

high temperatures.

Removing the front panel

1 Press DETACH to release the front

panel.

2 Grab the front panel and remove.

3 Put the front panel into provided pro-

tective case for safe keeping.

Attaching the front panel

1 Slide the front panel to the left until it

clicks.

Front panel and the head unit are jointed on

the left side. Make sure that the front panel

has been jointed to the head unit.

2 Press the right side of the front panel

until it is firmly seated.

# If you can’t attach the front panel to the head

unit successfully, try again. Front panel may be

damaged if you attach the front panel forcedly.

Before You Start

En

4

Section

01

What’s What

Head unit

12 5 6

d c a

4

9

8 7

3

b

1 TA button

Press to turn TA function on or off. Press

and hold to turn AF function on or off.

2 FUNCTION button

Press to recall the function menu when op-

erating a source.

3 a/b/c/d buttons

Press to perform manual seek tuning, fast

forward, reverse and track search controls.

Also used for controlling functions.

4 AUDIO button

Press to select various sound quality con-

trols.

5 Disc loading slot

Insert a disc to play.

6 EJECT button

Press to eject a CD from your built-in CD

player.

7 AUX input jack (3.5 mm stereo jack)

Use to connect an auxiliary equipment.

8 DETACH button

Press to remove the front panel from the

head unit.

9 1 to 6 buttons

Press for preset tuning.

a EQ button

Press to select various equalizer curves.

Press and hold to turn loudness on or off.

b SOURCE button, VOLUME

This unit is turned on by selecting a source.

Press to cycle through all the available

sources.

Press and hold to recall the initial setting

menu when the sources are off.

Rotate it to increase or decrease the vo-

lume.

c BAND button

Press to select among MW/LW and two FM

bands and cancel the control mode of func-

tions.

d DISPLAY button

Press to select different displays.

LCD display

6

3

2

1

5

4

7 8 9 a

1 Main display section

Shows the various information such as

band, play time, and other setting.

! Tuner

Band and frequency are displayed.

! RDS

Program service name, PTY information

or frequency is displayed.

! Built-in CD Player (Audio CD)

Elapsed play time is displayed.

! Built-in CD Player (WMA/MP3/WAV disc)

Folder number and elapsed play time are

displayed.

! Audio and initial setup

Function names and setup status are dis-

played.

2 Preset number/track number indicator

Shows the track number or preset number.

Operating this unit

En

5

English

Section

02

! If a track number 100 or more is selected,

d on the left of the track number indica-

tor will light.

3 AF indicator

Shows when AF (alternative frequencies

search) function is on.

4 TP indicator

Shows when a TP station is tuned in.

5 TA indicator

Shows when TA (traffic announcement

standby) function is on.

6 MP3/WMA indicator

Shows the type of the currently playing disc.

7 RPT indicator

Shows when repeat play is turned on.

8 LOUD indicator

Appears in the display when loudness is

turned on.

9 Stereo (5) indicator

Shows when the selected frequency is

being broadcast in stereo.

a LOC indicator

Shows when local seek tuning is on.

Basic Operations

Turning the unit on and

selecting a source

You can select a source you want to listen to.

To switch to the built-in CD player, load a disc

in the unit (refer to page 9).

% Press SOURCE to select a source.

Press SOURCE repeatedly to switch between

the following sources:

Tuner—Built-in CD player—AUX

Notes

! In the following cases, the sound source will

not change:

— When there is no disc in the unit.

— When AUX (auxiliary input) is set to off

(refer to page 13).

! AUX is set to on by default. Turn off the AUX

when not in use (refer to Switching the auxili-

ary setting on page 13).

! When this unit’s blue/white lead is connected

to the vehicle’s auto-antenna relay control

terminal, the vehicle’s antenna extends when

this unit’s source is turned on. To retract the

antenna, turn the source off.

Adjusting the volume

% Use VOLUME to adjust the sound level.

Turning the unit off

% Press SOURCE and hold until the unit

turns off.

Tuner

Listening to the radio

1 Press SOURCE to select the tuner.

2 Press BAND to select a band.

Press BAND until the desired band (F1, F2 for

FM or MW/LW) is displayed.

3 To perform manual tuning, briefly press

c or d.

4 To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

c or d.

Operating this unit

En

6

Section

02

# If you press and hold c or d you can skip sta-

tions. Seek tuning starts as soon as you release

the button.

Storing and recalling broadcast

frequencies

% When you find a frequency that you

want to store in memory, press one of pre-

set tuning buttons 1 to 6 and hold until the

preset number stops flashing.

Memorized radio station frequency can be re-

called by pressing the preset tuning button.

# Up to 12 FM stations, 6 for each of the two FM

bands, and 6 MW/LW stations can be stored in

memory.

# Press a or b to recall radio station frequen-

cies.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Press FUNCTION to select LOCAL.

2 Press a or b to turn local seek tuning

on or off.

3 Press c or d to set the sensitivity.

FM: LOCAL 1 —LOCAL 2—LOCAL 3—

LOCAL 4

MW/LW: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 1 to 6.

Once stored you can tune in to those frequen-

cies with the touch of button.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using buttons 1 to 6.

1 Press FUNCTION to select BSM.

2 Press a to turn BSM on.

Six strongest broadcast frequencies will be

stored in the order of their signal strength.

# To cancel the storage process, press b.

Switching the RDS display

RDS (radio data system) contains inaudible in-

formations that helps searching of the radio

stations.

! RDS service may not be provided by all sta-

tions.

! RDS functions such as AF and TA are only

active when your radio is tuned to an RDS

station.

% Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

Program service name—PTY information—

Frequency

# PTY information and the frequency appear on

the display for eight seconds.

PTY list

Specific Type of program

NEWS News

AFFAIRS Current affairs

INFO General information and advice

SPORT Sports

WEATHER Weather reports/meteorological infor-

mation

FINANCE Stock market reports, commerce,

trading, etc.

POP MUS Popular music

ROCK MUS Contemporary modern music

EASY MUS Easy listening music

OTH MUS Non-categorized music

JAZZ Jazz

COUNTRY Country music

NAT MUS National music

OLDIES Oldies, golden oldies

FOLK MUS Folk music

Operating this unit

En

7

English

Section

02

L.CLASS Light classical music

CLASSIC Classical music

EDUCATE Educational programs

DRAMA Radio plays and serials

CULTURE National or regional culture

SCIENCE Nature, science and technology

VARIED Light entertainment

CHILDREN Children’s

SOCIAL Social affairs

RELIGION Religious affairs or services

PHONE IN Phone in

TOURING Travel programs; not for traffic an-

nouncements

LEISURE Hobbies and recreational activities

DOCUMENT Docu mentaries

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts,

the unit receives it automatically (ALARM ap-

pears). When the broadcasting ends, the sys-

tem returns to the previous source.

! An emergency announcement can be can-

celed by pressing TA.

Selecting alternative frequencies

When the tuner can’t get good reception, the

unit automatically search for a different sta-

tion in a same network.

% Press and hold TA repeatedly to turn AF

(alternative frequency search) on or off.

Notes

! You can also turn the AF function on or off in

the menu that appears with the pressing of

FUNCTION.

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new fre-

quency from the station’s AF list. (This is only

available when using presets on the F1 or F2

bands.) No preset number appears on the dis-

play if the RDS data for the station received

differs from that for the originally stored sta-

tion.

! Sound may be temporarily interrupted by an-

other program during an AF frequency

search.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the tuner can’t find a suitable station, or re-

ception status becomes bad, the unit will auto-

matically search for a different station with a

same programming. During the search,

PI SEEK is displayed and the output is muted.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek on page 13.

Limiting stations to regional

programming

When AF is used, the regional function limits

the selection of stations broadcasting regional

programs.

1 Press FUNCTION to select REG.

2 Press a or b to turn the regional func-

tion on or off.

Notes

! Regional programming and regional networks

are organized differently depending on the

country (i.e., they may change according to

the hour, state or broadcast area).

! The preset number may disappear from the

display if the tuner tunes in a regional station

which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

Operating this unit

En

8

Section

02

Receiving traffic announcements

TA (traffic announcement standby) lets you re-

ceive traffic announcements automatically, no

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an

enhanced other network’s TP station (a station

carrying information which cross-references

TP stations).

1 Tune in a TP or enhanced other net-

work’s TP station.

TP indicator will light.

2 Press TA to turn traffic announcement

standby on.

# To turn traffic announcements standby off,

press TA again.

3 Use VOLUME to adjust the TA volume

when a traffic announcement begins.

The newly set volume is stored in memory and

recalled for subsequent traffic announce-

ments.

4 Press TA while a traffic announcement

is being received to cancel the announce-

ment.

The tuner returns to the original source but re-

mains in the standby mode until TA is pressed

again.

Notes

! You can also turn the TA function on or off in

the menu that appears with the pressing of

FUNCTION.

! The system switches back to the original

source following traffic announcement recep-

tion.

! Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM

when TA is on.

Built-in Player

Playing a disc

1 Insert a CD (CD-ROM) into the disc load-

ing slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

# You can eject a CD (CD-ROM) by pressing

EJECT.

2 Press a or b to select a folder when

playing a compressed audio.

# You cannot select a folder that does not have

a compressed audio file recorded in it.

# To return to folder 01 (ROOT), press and hold

BAND. However, if folder 01 (ROOT) contains no

files, playback commences with folder 02.

3 To perform fast forward or reverse,

press and hold c or d.

# If you select ROUGH, pressing and holding c

or d enables you to search ever y 10 tracks in the

current disc (folder). (Refer to Searching every 10

tracks in the current disc or folder on page 11.)

4 To skip back or forward to another

track, press c or d.

Notes

! Read the precautions with discs and player on

page 14.

! If an error message such as ERROR-11 is dis-

played, refer to Error messages on page 14.

! There is sometimes a delay between starting

up disc playback and the sound being issued.

When being read, FRMTREAD is displayed.

! When playing CD-EXTRA or MIXED-MODE

CDs, compressed audio and CD-DA can be

switched by pressing BAND.

! If you have switched between compressed

audio and CD-DA, playback starts at the first

track on the disc.

! The built-in CD player can play back com-

pressed audio recorded on CD-ROM. (Refer to

page 15 for files that can be played back.)

Operating this unit

En

9

English

Section

02

! When playing back VBR (variable bit rate) re-

corded files, elapsed play time may not be dis-

played correctly.

! When playing compressed audio, there is no

sound on fast forward or reverse.

Repeating play

Repeat play plays the same track/folder within

the selected repeat play range.

1 Press FUNCTION to select RPT.

2 Press c or d to select the repeat range.

DSC – Repeat all tracks

TRK – Repeat just the current track

FLD – Repeat the current folder

# If you select another folder during repeat play,

the repeat play range changes to disc repeat.

# When playing CD, performing track search or

fast forward/reverse cancels the repeat play auto-

matically.

# When playing compressed audio, performing

track search or fast forward/reverse during TRK

(track repeat) changes the repeat play range to

folder repeat.

# When FLD (folder repeat) is selected, it is not

possible to play back a subfolder of that folder.

# To return to the normal display, press BAND.

Playing tracks in random order

Tracks in a selected repeat range are played in

random order.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Press FUNCTION to select RDM.

3 Press a or b to turn random play on or

off.

When random play is on, RDM appears in the

display.

If you turn random play on during folder re-

peat, FRDM appears in the display.

# To return to the normal display, press BAND.

Scanning tracks or folders

Scan play searches the song within the se-

lected repeat range.

1 Select the repeat range.

Refer to Repeating play on this page.

2 Press FUNCTION to select SCAN.

3 Press a to turn scan play on.

SCAN appears in the display. The first 10 sec-

onds of each track is played.

# If you turn scan play on during FLD, FSCN ap-

pears in the display.

4 When you find the desired track press

b to turn scan play off.

# If the display has automatically returned to

the playback display, select SCAN again by press-

ing FUNCTION.

# After scanning of a disc (folder) is finished,

normal playback of the tracks will begin again.

Pausing disc playback

Pause lets you temporarily stop playback of

the disc.

1 Press FUNCTION to select PAUSE.

2 Press a or b to turn pause on or off.

# To return to the normal display, press BAND.

Using compression and BMX

Using the COMP (compression) and BMX

functions let you adjust the sound playback

quality of this unit.

1 Press FUNCTION to select COMP OFF.

2 Press a or b to select your favorite set-

ting.

COMP OFF—COMP 1—COMP 2—

COMP OFF—BMX 1—BMX 2

# To return to the normal display, press BAND.

Operating this unit

En

10

Section

02

Searching every 10 tracks in the

current disc or folder

You can switch the search method between

fast forward/reverse and searching every 10

tracks. Selecting ROUGH enables you to

search every 10 tracks.

1 Press FUNCTION to select FF/REV.

# If the search method ROUGH has been pre-

viously selected, ROUGH will be displayed.

2 Press d to select ROUGH.

! FF/REV – Fast forward and reverse

! ROUGH – Searching every 10 tracks

# To select FF/REV, press c.

3 Press BAND to return to the playback

display.

4 Press and hold c or d to search every

10 tracks on a disc (folder).

# If the rest of track number is less than 10,

press and hold c or d recalls the first (last) one.

Displaying text information on

disc

% Press DISPLAY.

Press DISPLAY repeatedly to switch between

the following settings:

For CD TEXT discs

Play time—DISC TTL (disc title)—ART NAME

(disc artist name)—TRK TTL (track title)—

ART NAME (track artist name)

For WMA/MP3 discs

Play time—FOLDER (folder name)—FILE (file

name)—TRK TTL (track title)—ART NAME (ar-

tist name)—ALBM TTL (album title)—

COMMENT (comment)—Bit rate

For WAV discs

Play time—FOLDER (folder name)—FILE (file

name)—Sampling frequency

Notes

! You can scroll to the left of the title by pressing

and holding DISPLAY.

! Audio CD that contains certain information

such as text and/or number is CD TEXT.

! If specific information has not been recorded

on a disc, NO XXXX will be displayed (e.g.,

NO T-TTL).

! When playing back VBR (variable bit rate)-re-

corded WMA files, the average bit rate value is

displayed.

! When playing back VBR (variable bit rate)-re-

corded MP3 files, VBR is displayed instead of

bit rate value.

! Depending on the version of iTunes

®

used to

write MP3 files onto a disc, comment informa-

tion may not be correctly displayed.

— iTunes is a trademark of Apple Inc., regis-

tered in the U.S. and other countries.

! The sampling frequency shown in the display

may be abbreviated.

Audio Adjustments

Using balance adjustment

Fader/balance setting creates an ideal listen-

ing environment in all occupied seats.

1 Press AUDIO to select FAD.

2 Press a or b to adjust front/rear speak-

er balance.

FAD F15 to FAD R15 is displayed.

# FAD 0 is the proper setting when only two

speakers are used.

3 Press c or d to adjust left/right speaker

balance.

BAL L15 to BAL R15 is displayed.

# To return to the normal display, press BAND.

Using the equalizer

There are six stored equalizer settings such as

DYNAMIC, VOCAL, NATURAL, CUSTOM,

FLAT and POWERFUL that can easily be re-

called at any time.

! CUSTOM is an adjusted equalizer curve

that you create.

Operating this unit

En

11

English

Section

02

! When FLAT is selected no supplement or

correction is made to the sound.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

Adjusting bass/mid/treble

You can adjust the bass/mid/treble level.

1 Press AUDIO to select BASS/MID/

TREBLE.

2 Press a or b to adjust the level.

+6 to –6 is displayed as the level is increased

or decreased.

# To return to the normal display, press BAND.

Adjusting loudness

Loudness compensates for deficiencies in the

low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

2 Press a or b to turn loudness on or off.

# You can also turn loudness on or off by press-

ing and holding EQ.

3 Press c or d to select a desired level.

LOW (low)—HI (high)

# To return to the normal display, press BAND.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the FM volume level,

which remains unchanged.

! The MW/LW volume level can also be ad-

justed with source level adjustments.

1 Compare the FM volume level with the

level of the source you wish to adjust.

2 Press AUDIO to select SLA.

3 Press a or b to adjust the source vo-

lume.

SLA +4 to SLA –4 is displayed as the source

volume is increased or decreased.

# To return to the normal display, press

BAND.

Other Functions

Adjusting initial settings

Using the initial settings, you can customize

various system settings to achieve optimal per-

formance from this unit.

1 Press SOURCE and hold until the unit

turns off.

2 Press SOURCE and hold until function

name appears in the display.

3 Press FUNCTION to select one of the in-

itial settings.

Press FUNCTION repeatedly to switch be-

tween the following settings:

FM (FM tuning step)—A-PI (auto PI Seek)—

AUX (auxiliary input)—SAVE (power save)—

TITLE (multi language)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND.

# You can also cancel initial settings by holding

down SOURCE until the unit turns off.

Operating this unit

En

12

Section

02

Setting the FM tuning step

Normally the FM tuning step employed by

seek tuning is 50 kHz. When AF or TA is on,

the tuning step automatically changes to 100

kHz. It may be preferable to set the tuning step

to 50 kHz when AF is on.

! The tuning step remains at 50 kHz during

manual tuning.

1 Press FUNCTION to select FM.

2 Press c or d to select the FM tuning

step.

Press c to select 50 (50 kHz). Press d to se-

lect 100 (100 kHz).

Switching Auto PI Seek

The unit can automatically search for a differ-

ent station with the same programming, even

during preset recall.

1 Press FUNCTION to select A-PI.

2 Press a or b to turn the Auto PI seek

on or off.

Switching the auxiliary setting

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using auxiliary equipment connected to this

unit.

1 Press FUNCTION to select AUX.

2 Press a or b to turn the auxiliary set-

ting on or off.

Saving the battery consumption

Switching this function on enables you to save

the consumption of battery power.

! Operations other than turning on the

source are not allowed when this function

is on.

Important

If the battery in your vehicle is disconnected the

Power Save mode is canceled. Turn on Power

Save again once the battery has been recon-

nected. If the ignition switch in your vehicle

doesn’t have an ACC (accessory) position, it is

possible depending on the connection method

that when Power Save is off, the unit will draw

power from the battery.

1 Press FUNCTION to select SAVE.

2 Press a or b to turn the power save on

or off.

Multi language display setting

Text information such as title name, artist

name or comment can be recorded on a com-

pressed audio disc.

This unit can display them even if they are em-

bedded in either European language or Rus-

sian language.

! If embedded language and selected lan-

guage setting are not consistent with each

other, text information may not be dis-

played properly.

! Some characters may not be displayed

properly.

1 Press FUNCTION to select TITLE.

2 Press c or d to select the language.

EUR (European language)—RUS (Russian lan-

guage)

Sound muting

Sound from this unit is muted automatically in

the following cases:

! When a call is made or received using a

cellular telephone connected to this unit.

! When the voice guidance is output from a

Pioneer navigation unit connected to this

unit.

The sound is turned off, MUTE is displayed

and no audio adjustments, except volume con-

trol, are possible. Operation returns to normal

when the phone connection or the voice gui-

dance is ended.

Operating this unit

En

13

English

Section

02

Error messages

When you contact your dealer or your nearest

Pioneer Service Center, be sure to record the

error message.

Message Cause Action

ERROR-11, 12,

17, 30

Dirty disc Clean disc.

ERROR-11, 12,

17, 30

Scratched disc Replace disc.

ERROR-10, 11,

12, 15, 17, 30,

A0

Electrical or me-

chanical

Switch the ignition

key, or switch to a

different source,

then back to the

CD player.

ERROR-15 The inserted disc

does not contain

any data

Replace disc.

ERROR-22, 23 The CD format

cannot be played

back

Replace disc.

NO AUDIO The inserted disc

does not contain

any files that can

be played back

Replace disc.

PROTECT All the files on

the inserted disc

are secured by

DRM

Replace disc.

SKIPPED The inserted disc

contains WMA

files that are pro-

tected by DRM

Replace disc.

Handling guideline of discs

and player

! Use only discs featuring either of following

two logos.

! Use only conventional, fully circular discs.

Do not use shaped discs.

! Use 12-cm or 8-cm CD. Do not use an

adapter when playing 8-cm CDs.

! Do not insert anything other than a CD into

the CD loading slot.

! Do not use cracked, chipped, warped, or

otherwise damaged discs as they may da-

mage the player.

! Unfinalized CD-R/CD-RW disc playback is

not possible.

! Do not touch the recorded surface of the

discs.

! Store discs in their cases when not in use.

! Avoid leaving discs in excessively hot envir-

onments including under direct sunlight.

! Do not attach labels, write on or apply che-

micals to the surface of the discs.

! To clean a CD, wipe the disc with a soft

cloth outward from the center.

! Condensation may temporarily impair the

player’s performance. Leave it to adjust to

the warmer temperature for about one

hour. Also, wipe any dump discs with a soft

cloth.

! Playback of discs may not be possible be-

cause of disc characteristics, disc format,

recorded application, playback environ-

ment, storage conditions and so on.

! Text information may not be correctly dis-

played depending on the recorded environ-

ment.

! Road shocks may interrupt disc playback.

! Read the precautions with discs before

using them.

Dual Discs

! Dual Discs are two-sided discs that have a

recordable CD for audio on one side and a

recordable DVD for video on the other.

Additional Information

En

14

Appendix

! Since the CD side of Dual Discs is not phy-

sically compatible with the general CD

standard, it may not be possible to play the

CD side with this unit.

! Frequent loading and ejecting of a Dual

Disc may result in scratches on the disc.

Serious scratches can lead to playback pro-

blems on this unit. In some cases, a Dual

Disc may become stuck in the disc loading

slot and will not eject. To prevent this, we

recommend you refrain from using Dual

Disc with this unit.

! Please refer to the information from the

disc manufacturer for more detailed infor-

mation about Dual Discs.

Compressed audio files

! Depending on the version of Windows

Media Player used to encode WMA files,

album names and other text information

may not be correctly displayed.

! There may be a slight delay when starting

playback of WMA files encoded with image

data.

! ISO 9660 Level 1 and 2 compliant. Romeo

and Joliet file systems are both compatible

with this player.

! Multi-session playback is possible.

! Compressed audio files are not compatible

with packet write data transfer.

! Only 64 characters from the beginning can

be displayed as a file name (including the

extension such as .wma, .mp3 or .wav) or a

folder name.

! Folder selection sequence or other opera-

tion may be altered depending on the en-

coding or writing software.

! Regardless of the length of blank section

between the songs of original recording,

compressed audio discs will play with a

short pause between songs.

! File extensions such as .wma, .mp3 or.wav

must be used properly.

Example of a hierarchy

: Folder

: Compressed audio file

1

2

3

4

5

6

L

e

v

e

l 1 L

e

v

e

l 2 L

e

v

e

l 3 L

e

v

e

l 4

! This unit assigns folder numbers. The user

cannot assign folder numbers.

! Folder hierarchy is allowed up to eight tiers.

However, practical hierarchy of folder is

less than two tiers.

! Up to 99 folders on a disc can be played

back.

Compressed audio compatibility

WMA

! Compatible format: WMA encoded by

Windows Media Player

! Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps

to 384 kbps (VBR)

! Sampling frequency: 32 kHz to 48 kHz

! Windows Media Audio 9 Professional, Loss-

less, Voice: No

MP3

! Bit rate: 8 kbps to 320 kbps

! Sampling frequency: 16 kHz to 48 kHz (32,

44.1, 48 kHz for emphasis)

! Compatible ID3 tag version: 1.0, 1.1, 2.2,

2.3, 2.4 (ID3 tag Version 2.x is given priority

than Version 1.x.)

! M3u playlist: No

! MP3i (MP3 interactive), mp3 PRO: No

Additional Information

En

15

English

Appendix

WAV

! Compatible format: Linear PCM (LPCM),

MS ADPCM

! Quantization bits: 8 and 16 (LPCM), 4 (MS

ADPCM)

! Sampling frequency: 16 kHz to 48 kHz

(LPCM), 22.05 kHz to 44.1 kHz (MS AD-

PCM)

Russian character chart

D: Display

C: Character

DC DC DC DC

А Б В Г

Д Е, Ё Ж З

И, Й К Л М

Н О П Р

С Т У Ф

Х Ц Ч Ш, Щ

Ъ Ы Ь Э

Ю Я

Additional Information

En

16

Appendix

Specifications

General

Power source ............................. 14.4 V DC (10.8 V to 15.1 V

allowable)

Grounding system ................... Negative type

Max. current consumption

..................................................... 10.0 A

Dimensions (W × H × D):

DIN

Chassis ..................... 178 × 50 × 162 mm

Nose ........................... 188 × 58 × 15 mm

D

Chassis ..................... 178 × 50 × 162 mm

Nose ........................... 170 × 48 × 15 mm

Weight .......................................... 1.3 kg

Audio

Maximum power output ....... 50 W × 4

Continuous power output ...22 W × 4 (50 Hz to 15 000

Hz, 5% THD, 4 W load, both

channels driven)

Load impedance ...................... 4 W (4 W to 8 W allowable)

Tone controls:

Bass

Frequency ................ 100 Hz

Gain ............................ ±13dB

Mid

Frequency ................ 1 kHz

Gain ............................ ±12 dB

Treble

Frequency ................ 10 kHz

Gain ............................ ±12 dB

CD player

System .......................................... Compact disc audio system

Usable discs .............................. Compact disc

Signal-to-noise ratio ............... 94 dB (1 kHz) (IEC-A net-

work)

Number of channels .............. 2 (stereo)

WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2ch

audio)

(Windows Media Player)

MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3

WAV signal format .................. Linear PCM & MS ADPCM

FM tuner

Frequency range ...................... 87.5 MHz to 108.0 MHz

Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,

S/N: 30 dB)

Signal-to-noise ratio ............... 75 dB (IEC-A network)

MW tuner

Frequency range ...................... 531 kHz to 1 602 kHz (9 kHz)

Usable sensitivity ..................... 18 µV (S/N: 20 dB)

Signal-to-noise ratio ............... 65 dB (IEC-A network)

LW tuner

Frequency range ...................... 153 kHz to 281 kHz

Usable sensitivity ..................... 30 µV (S/N: 20 dB)

Signal-to-noise ratio ............... 65 dB (IEC-A network)

Note

Specifications and the design are subject to mod-

ifications without notice due to improvements.

Additional Information

En

17

English

Appendix

Page is loading ...

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU

TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-7555

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundar y Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada

TEL: 1-877-283-5901

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

Blvd.Manuel Avila Camacho 138 10 piso

Col.Lomas de Chapultepec, Mexico, D.F. 11000

TEL: 55-9178-4270

先鋒股份有限公司

總公司 : 台北市中山北路二段 44號13樓

電話 : (02) 2521-3588

先鋒電子（香港）有限公司

香港九龍尖沙咀海港城世界商業中心

9樓901-6室

電話 : (0852) 2848-6488

Published by Pioneer Corporation.

Publié par Pioneer Corporation. Copyright

droits réservés.

Printed in China

Imprimé en Chine

<YRD5140-A/S> EW

Pioneer DEH-2020MP User manual

This manual is also suitable for

Pioneer DEH-2020MP User manual

in other languages

Related papers

Other documents