Box-Design Phono Box DS+ Product information

Type
Product information

Box-Design Phono Box DS+

The Phono Box DS+ is a high-quality phono preamplifier that offers a wide range of features and connectivity options. It is designed to connect to a turntable and amplify the phono signal to a level that can be used by an amplifier or receiver. The Phono Box DS+ has a built-in RIAA equalization curve, which is necessary to correct the frequency response of the phono signal. It also has a subsonic filter that can be used to remove unwanted low-frequency noise.

The Phono Box DS+ has two sets of inputs, one for MM (moving magnet) cartridges and one for MC (moving coil) cartridges. It also has two sets of outputs, one for unbalanced RCA connections and one for balanced XLR connections. The Phono Box DS+ is powered by a 15V DC power supply.

Box-Design Phono Box DS+

The Phono Box DS+ is a high-quality phono preamplifier that offers a wide range of features and connectivity options. It is designed to connect to a turntable and amplify the phono signal to a level that can be used by an amplifier or receiver. The Phono Box DS+ has a built-in RIAA equalization curve, which is necessary to correct the frequency response of the phono signal. It also has a subsonic filter that can be used to remove unwanted low-frequency noise.

The Phono Box DS+ has two sets of inputs, one for MM (moving magnet) cartridges and one for MC (moving coil) cartridges. It also has two sets of outputs, one for unbalanced RCA connections and one for balanced XLR connections. The Phono Box DS+ is powered by a 15V DC power supply.

Product information
12. 2012
Update: DZ Datum 28.11.2012
Phono Box DS+
Phono preamplifier
 MM & MC capable
 Linear RIAA equalisation
 Ultimate circuit technology from Dr. Sykora
 Ultra low noise & low distortion levels
 Double mono SMD circuitry
 Low loss polypropylen capacitors
 Substantial setup options
 Classy & elegant display shows setup parameters
 Relay switching
 Metal casing protects against vibration and interference
 Faceplate silver or black
Technical data
Input impedance 10 / 100 / 1000ohms or 47kohms
Load capacity switchable 47pF 147pF, 267pF, 367pF
(only relevant for MM @ 47kohms)
Gain MM or high output MC: 40, 45 dB
low output MC: 60, 65 dB
Signal to noise ratio 90dB (A weighted @ 40dB input gain)
THD < 0,005%
RIAA accuracy within 0,3dB/20Hz - 20kHz
Subsonic 20Hz / - 12dB
Input & Output RCA
Power supply 15V/500mA DC; 220 - 240V, 50Hz
Power consumption 200mA DC < 1 watt standby
dimensions W x H x D (D with sockets) 103 x 72 x 144 (156)mm
weight 1025g without power supply
PRO-JECT AUDIO SYSTEMS
a division of AUDIO TUNING GmbH
1050 Wien, Margaretenstraße 98,
Premium class phono preamplifier with big display
This ultra low noise precision phono preamplifier benefits from outstanding circuit technology from Dr. Sykora, well-known from Phono Box S, but uses
ultimate components. For the first time all setup options can be made from the front panel display, what makes circumstantial handling of mini dip-
switches or jumpers obsolete. Exceptional performance and outstanding flexibility with almost any MM or MC cartridge make Phono Box DS+ the best
choice in its price class. All switching is done by relais including a subsonic filter, that prevents your amplifier and speakers of ultra low rumble below
20Hz. Carefully selected amplifier modules and audiophile-grade polypropylene capacitors guarantee a breathtaking sound experience. Therefore
Phono Box DS+ is a perfect upgrade for hifi systems of ambitious vinyl aficionados!
Retail price
399,00 €
  • Page 1 1

Box-Design Phono Box DS+ Product information

Type
Product information

Box-Design Phono Box DS+

The Phono Box DS+ is a high-quality phono preamplifier that offers a wide range of features and connectivity options. It is designed to connect to a turntable and amplify the phono signal to a level that can be used by an amplifier or receiver. The Phono Box DS+ has a built-in RIAA equalization curve, which is necessary to correct the frequency response of the phono signal. It also has a subsonic filter that can be used to remove unwanted low-frequency noise.

The Phono Box DS+ has two sets of inputs, one for MM (moving magnet) cartridges and one for MC (moving coil) cartridges. It also has two sets of outputs, one for unbalanced RCA connections and one for balanced XLR connections. The Phono Box DS+ is powered by a 15V DC power supply.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI