Box-Design Phono Box DS+
The Phono Box DS+ is a high-quality phono preamplifier that offers a wide range of features and connectivity options. It is designed to connect to a turntable and amplify the phono signal to a level that can be used by an amplifier or receiver. The Phono Box DS+ has a built-in RIAA equalization curve, which is necessary to correct the frequency response of the phono signal. It also has a subsonic filter that can be used to remove unwanted low-frequency noise.
The Phono Box DS+ has two sets of inputs, one for MM (moving magnet) cartridges and one for MC (moving coil) cartridges. It also has two sets of outputs, one for unbalanced RCA connections and one for balanced XLR connections. The Phono Box DS+ is powered by a 15V DC power supply.
Box-Design Phono Box DS+
The Phono Box DS+ is a high-quality phono preamplifier that offers a wide range of features and connectivity options. It is designed to connect to a turntable and amplify the phono signal to a level that can be used by an amplifier or receiver. The Phono Box DS+ has a built-in RIAA equalization curve, which is necessary to correct the frequency response of the phono signal. It also has a subsonic filter that can be used to remove unwanted low-frequency noise.
The Phono Box DS+ has two sets of inputs, one for MM (moving magnet) cartridges and one for MC (moving coil) cartridges. It also has two sets of outputs, one for unbalanced RCA connections and one for balanced XLR connections. The Phono Box DS+ is powered by a 15V DC power supply.
Box-Design Phono Box DS+
The Phono Box DS+ is a high-quality phono preamplifier that offers a wide range of features and connectivity options. It is designed to connect to a turntable and amplify the phono signal to a level that can be used by an amplifier or receiver. The Phono Box DS+ has a built-in RIAA equalization curve, which is necessary to correct the frequency response of the phono signal. It also has a subsonic filter that can be used to remove unwanted low-frequency noise.
The Phono Box DS+ has two sets of inputs, one for MM (moving magnet) cartridges and one for MC (moving coil) cartridges. It also has two sets of outputs, one for unbalanced RCA connections and one for balanced XLR connections. The Phono Box DS+ is powered by a 15V DC power supply.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI