Dell PowerEdge R740 Owner's manual

Brand: Dell

Model: PowerEdge R740

Type: Owner's manual

Event and Error Message Reference Guide

for Dell EMC PowerEdge Servers

June 2021

Rev. A00

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid

the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Chapter 1: Introduction................................................................................................................. 4

Alert category definition.................................................................................................................................................... 6

Intended audience............................................................................................................................................................... 6

Chapter 2: Getting help................................................................................................................. 7

Recycling or End-of-Life service information............................................................................................................... 7

Contacting Dell..................................................................................................................................................................... 7

Accessing system information by using QRL................................................................................................................ 7

Receiving automated support with SupportAssist ..................................................................................................... 8

Contents

Contents 3

Introduction

This Error and Event Message reference guide lists the messages that are displayed on graphical user interface (GUI), command

line interface (CLI), and stored in the log files. Messages are displayed or stored as a result of user action, automatic event

occurrence, or for data logging purposes.

For information about the event and error messages generated by the system firmware and agents that monitor system

components, go to qrl.dell.com > Look Up > Error Code, type the error code, and then click Look it up.

For complete description about event and error messages, see EEMI Guide at https://qrl.dell.com/LCDError/Lookup?

q=ErrorCode.

● Messages are divided into three elements:

○ Message: Indicates the actual message, and probable cause, wherever applicable.

○ Recommended Response Action: Indicates the remedial tasks to be performed by the user to resolve an issue.

Comprehensive information is given about the GUI navigation path (or RACADM and WS-Man commands) that helps is

effective and fast resolution.

○ Detailed Description: Provides more info about the error or event, where appropriate.

● Messages are classified according to hardware- and software categories in the server and its management applications

(such as iDRAC, OMSA, CMC, and Lifecycle Controller). The category and severity of each message is also specified.

● Use the EEMI reference guide to understand more about the events and resolve issues associated with your Dell Enterprise

systems.

● Messages are prefixed with event type to help easy identification. For example PSU, STOR, and VLT representing power

supply unit, storage and voltage respectively. Expansion of acronyms used for classifying error messages is listed in the table

here:

Acronym

Category

AMP Amperage

ASR Auto Sys Reset

BAR Backup & Restore

BAT Battery Event

BIOS BIOS management

BOOT Boot control

CBL Cable

CMC Chassis Management Control

CPU Processor

CPUA Proc Absent

CTL Storage Controller

DH Certificate Management

DIAG Diagnostic

DIS Auto-discovery

DKM Dell Key Manager

ENC Storage enclosure

EPP Extended power performance

FAN Fan event

FC Fibre channel

4 Introduction

FCD Feature card

FLDC Unknown

FSD Debug

HWC Hardware configuration

IOID I/O Identify optimization

IOV I/o virtualization

IPA DRAC IP address

ISM iDRAC Service Module

JCP Job control

LC Lifecycle Controller

LIC Licensing

LNK Link status

LOG Log event

MEM Memory

NIC NIC configuration

OSD OS deployment

OSE OS event

PCI PCI device

PDR Physical disk drive

PFM System performance event

POW Power usage

PR Part exchange

PST BIOS POST

PSU Power supply unit

PSUA PSU absent

PWR Power usage

RAC RAC event

RDU Redundancy

RED FW download

RFL IDSDM media

RFLA IDSDM absent

RFM Flex address SD

RRDU IDSDM redundancy

RSI Remote service

SEC Security event

SEL System event log

SSD PCIe SSD

STOR Storage

SUP Firmware update job

Introduction 5

SWC Software configuration

SWU Software change

SYS System info

TMP Temperature

TMPS Temperature statistics

TST Test alert

UEFI UEFI event

USR User tracking

VDR Virtual drive

VF vFLash media

VFL vFlash event

VFLA vFlash absent

VLT Voltage

VME Virtual media

VRM Virtual console

Topics:

• Alert category definition

• Intended audience

Alert category definition

● System Health: Represents all the alerts that are related to hardware within the system chassis. For example, temperature

errors, voltage errors, and device errors.

● Storage Health: Represents alerts that are related to the storage subsystem. For example, controller errors, physical disk

drive errors, and virtual drive errors.

● Configuration: Represents alerts that are related to hardware, firmware, and software configuration changes. For example,

PCI-e card added or removed, RAID configuration changed, and iDRAC license changed.

● Audit: Category represents the audit log. Examples include, user login/logout information, Password authentication failures,

session info, power states.

● Update: Represents alerts that are generated because of firmware or driver upgrades and downgrades. This does not

represent firmware inventory.

Intended audience

This Error and Event Message reference guide is intended for system administrators and other users involved in managing and

troubleshooting Dell EMC Enterprise systems. For quick and easy reference, this guide is available on mobile devices also.

Introduction

Getting help

Topics:

• Recycling or End-of-Life service information

•

Contacting Dell

• Accessing system information by using QRL

• Receiving automated support with SupportAssist

Recycling or End-of-Life service information

Take back and recycling services are offered for this product in certain countries. If you want to dispose of system components,

visit www.dell.com/recyclingworldwide and select the relevant country.

Contacting Dell

Dell provides online and telephone based support and service options. If you do not have an active internet connection, you can

find Dell contact information on your purchase invoice, packing slip, bill or Dell product catalog. The availability of services varies

depending on the country and product, and some services may not be available in your area. To contact Dell for sales, technical

assistance, or customer service issues:

1. Go to www.dell.com/support/home

2. Select your country from the drop-down menu on the lower right corner of the page.

3. For customized support:

a. Enter the system Service Tag in the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword

field.

b. Click Submit.

The support page that lists the various support categories is displayed.

4. For general support:

a. Select your product category.

b. Select your product segment.

c. Select your product.

The support page that lists the various support categories is displayed.

5. For contact details of Dell Global Technical Support:

a. Click Global Technical Support

b. The Contact Technical Support page is displayed with details to call, chat, or e-mail the Dell Global Technical Support

team.

Accessing system information by using QRL

You can use the Quick Resource Locator (QRL) to get immediate access to the information about your system. If you want to

access information specific to the system Service Tag, such as configuration and warranty, you can access QR code located on

the system Information tag.

Ensure that your smart phone or tablet has the QR code scanner installed.

The QRL includes the following information about your system:

● How-to videos

● Reference materials, including the Owner’s Manual, LCD diagnostics, and mechanical overview

● A direct link to Dell to contact technical assistance and sales teams

Getting help 7

1. Go to www.dell.com/qrl and navigate to your specific product or

2. Use your smart phone or tablet to scan the model-specific Quick Resource (QR) code on your PowerEdge system or in the

Quick Resource Locator section.

Receiving automated support with SupportAssist

Dell EMC SupportAssist is an optional Dell EMC Services offering that automates technical support for your Dell EMC server,

storage, and networking devices. By installing and setting up a SupportAssist application in your IT environment, you can receive

the following benefits:

●

Automated issue detection — SupportAssist monitors your Dell EMC devices and automatically detects hardware issues,

both proactively and predictively.

● Automated case creation — When an issue is detected, SupportAssist automatically opens a support case with Dell EMC

Technical Support.

● Automated diagnostic collection — SupportAssist automatically collects system state information from your devices and

uploads it securely to Dell EMC. This information is used by Dell EMC Technical Support to troubleshoot the issue.

● Proactive contact — A Dell EMC Technical Support agent contacts you about the support case and helps you resolve the

issue.

The available benefits vary depending on the Dell EMC Service entitlement purchased for your device. For more information

about SupportAssist, go to www.dell.com/supportassist.

8 Getting help

Dell PowerEdge R740 Owner's manual

Dell PowerEdge R740 Owner's manual

Dell PowerEdge R740 Owner's manual

Related papers