WEE BUDDY
®
1/8" FISH TAPE
FOR OCCUPIED CONDUIT AS SMALL AS .5"
800-346-1956 | JAMESONTOOLS.COM
The Wee Buddy’s round rod slides easily over existing wires, especially
at bends, with a smooth, non-binding payout and return to canister.
Easy-grip design allows for more ecient pushing and pulling when
fishing telecom, voice, data or electrical conduit.
Patented canister features snap-on accessory kit.
• Non-Conductive Fiberglass Rod
• 1/8" OD Fiberglass Rod
• 1.5" Bending Radius
• 200-lb Pull/Tensile Strength
• Available With or Without Accessory Kit
• Dimensions: 12.5" Diameter x 2"
WEE BUDDY
®
FISH TAPE
WITH ACCESSORY KIT
PART NUMBER DESCRIPTION
8-18-50K
1/8" x 50' Wee Buddy with Kit
8-18-100K 1/8" x 100' Wee Buddy with Kit
8-18-150K 1/8" x 150' Wee Buddy with Kit
WEE BUDDY
®
FISH TAPE
WITHOUT ACCESSORY KIT
PART NUMBER DESCRIPTION
8-18-50
1/8" x 50' Wee Buddy - No Kit
8-18-100 1/8" x 100' Wee Buddy - No Kit
8-18-150 1/8" x 150' Wee Buddy - No Kit
WEE BUDDY
®
ACCESSORY KIT
PART NUMBER ACCESSORIES DESCRIPTION
8-160 Pulling Eye Attaches to rod end fitting for pull line attachment
8-162 Large Spring Leader
Guides rod through bends, sweeps and misalignments
8-163 Small Spring Leader
8-140 Splice Repair Kit Splice Ferrule, Adhesive, Emery Cloth, Instructions
8-146 End Ferrule Repair Kit End Ferrule, Adhesive, Emery Cloth, Instructions
8-18-AK Accessory Kit
Small Leader, Large Leader, 2 Pulling Eyes, 2 Splice
Ferrules, 2 End Ferrules, Adhesive, Emery Cloth, Case
PD-2021-8