Lorex D861 Series: Experience the next level of home security with remote access, advanced motion detection, and crystal-clear video quality. Keep an eye on your property from anywhere using the Lorex Home app, receive real-time alerts, and deter potential intruders with the built-in siren and warning light.
Lorex D861 Series: Experience the next level of home security with remote access, advanced motion detection, and crystal-clear video quality. Keep an eye on your property from anywhere using the Lorex Home app, receive real-time alerts, and deter potential intruders with the built-in siren and warning light.
D861_RAG_EN_R1
Need Help?
Visit us online for up-to-date software
and complete instruction manuals
Click on the Downloads tab
4
Visit lorex.com
Search for the model
number of your product
Click on your product
in the search results
3
2
1
Before You Start:
D861 Series
Remote Access Guide
Remote access to your security system with apps for iOS and Android
2 / 2
Copyright © 2020 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specications
and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
Record your information below:
DEVICE ID:
The Device ID is printed on a label on the side panel of the recorder.
Device ID: xxxxxxxxxxx
STEP 1: Find your Device ID
The following is a brief overview of the controls available on the Live View screen of the
Lorex Home app. For complete app instructions, see the Lorex Home manual on your
product page at lorex.com.
H
CD E F G
A
I J K
LM
N
Settings: Congure settings for selected device.
Snapshot: Tap to save a still image of the
current live view.
Two-Way Audio: Two-way audio cameras
only. Tap to speak into the microphone
on your mobile device. Sound will be
transmitted through the camera's speaker.
Tap again to listen in.
Return to Main Menu
Pause/Restart Video
Viewing Mode: Switch between single
and multi-channel views.
Timeline: Tap to search for and play back
recorded videos.
Switch Stream: Tap to switch to HD* video
quality. Tap again for reduced video quality
that is optimized for streaming.
Audio: Tap to mute / unmute.
A
B
C
D
E
F
G
H
I
J
K
Fullscreen: Tap to view in landscape mode.
Warning Light: Deterrence cameras only. Tap to manually enable the white light.
PTZ Controls: Pan-Tilt-Zoom cameras only. Open controls to move and congure PTZ
cameras.
Siren: Deterrence cameras only. Tap to enable the camera's siren.
L
M
N
Manual Recording: Tap to begin manual
recording of the current live view. Tap again
to stop recording and save the video clip to
your mobile device's storage.
B
If you are having trouble connecting, try the following:
• Restart the recorder by disconnecting and reconnecting the power adapter.
• Ensure the recorder is connected to the router using an Ethernet cable and
then restart the recorder.
• Double-check the username and password.
• Ensure your recorder has the latest rmware.
• Ensure your mobile app is up-to-date.
Troubleshooting
Default access information:
• Default Username: admin
• Password: See the Quick Setup Guide [Guide 1/2] for the password created
upon initial setup.
If you have forgotten your password, contact Lorex Technical Support.
STEP 2B: Lorex Home Overview
a
b
c
d
Scan the QR code to install the free Lorex Home
app from the App Store or Google Play Store.
STEP 2A: Mobile Setup
f
e
Congratulations! You can now view video from your cameras on your
mobile device.
Tap the Lorex Home icon to launch
the app.
Scan the QR code on the side panel of the recorder.
Set the preferred timezone and tap Live View. The
app opens in Live View and streams video from all
connected cameras.
From the Devices tab, tap to add a device. If this
is not your rst device, tap the + icon in the top-right
corner.
Tap Sign up and follow the on-screen instructions to
create a new Lorex Home account.
NOTE: If your mobile device cannot scan the QR code,
tap Manually enter Device ID.
Enter the password you recorded on the Quick Setup
Guide [Guide 1/2].
g
NOTE: The email address and password used to
create your Lorex Home account are different from the
recorder's username (default: admin) and password
you created on the Quick Setup Guide [Guide 1/2].
* HD resolution will be limited to the maximum screen resolution of your mobile device. This will
not impact the recording resolution of the NVR.
• This guide is for users who wish to view their security system
remotely using mobile apps. If you plan to only view and congure
the system locally, you may skip this guide.
• Make sure you have a router and high-speed Internet access (not
included).
• Connect your recorder to your router using an Ethernet cable (see the
Quick Setup Guide [Guide 1/2] for details).
• Ensure your recorder is up-to-date with the latest rmware version.
• Please note that the following minimum upload speeds are required for
remote video streaming:
You must complete initial setup of the recorder detailed in the Quick Setup Guide
[Guide 1/2] before mobile setup.
• 5 Mbps for 4K video.
• 3.5 Mbps for lower resolutions.
Up to 3 devices may connect to the system at the same time.
-
1
Lorex D861 Series: Experience the next level of home security with remote access, advanced motion detection, and crystal-clear video quality. Keep an eye on your property from anywhere using the Lorex Home app, receive real-time alerts, and deter potential intruders with the built-in siren and warning light.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Lorex N4K3-1612BB Remote Access Guide
-
Lorex 2KMPX1616 User guide
-
Lorex D241A81B-W User guide
-
Lorex N881A64B User guide
-
Lorex NC4K3F-164WD Remote Access Guide
-
Lorex N4K2SD-86WBD User manual
-
Lorex N4K3-1612BB User manual
-
Lorex N842 Series User manual
-
Lorex LN1081-44 User manual
-