Fujitsu fa-19w1s-h2a User manual
- Category
- TVs & monitors
- Type
- User manual
This LCD monitor has been already
approved by safety certification agencies in
right, and you should use it according to
the user manual, please.
1
Contents
PACKAGE CONTENTS…………………………………………………………………………………….2
PRODUCT……………………………………………………………………………………………………3
Contents....................................................................................................................................................................3
Features....................................................................................................................................................................3
Power saver ..............................................................................................................................................................3
Plug & play................................................................................................................................................................3
SAFETY ...........................................................................................................................................4
Electrical....................................................................................................................................................................4
Common....................................................................................................................................................................5
SET UP YOUR LCD MONITOR.......................................................................................................6
Installation.................................................................................................................................................................6
Screen Adjustments ..................................................................................................................................................6
OSD Control..............................................................................................................................................................7
Description ................................................................................................................................................................9
TROUBLE SHOOTING..................................................................................................................10
MAINTENANCE............................................................................................................................. 11
SPECIFICATIONS …………………………………………………………………………………………12
2
Package Contents
Main
The LCD monitor and the stand.
Accessory
All of accessories have been tested and qualified. Do not use any non-
qualified accessories
with this LCD monitor.
DC Adapter (POTRANS: UP06511190 or DELTA:ADP-65MB B).
Power Cord.
15-pin D-Sub Signal Cable.
Audio Cable.
User Manual (CD-ROM).
Quick Guide
Warranty card
Features
48.4cm (19” Wide Screen) TFT LCD Monitor.
Supports Resolutions up to 1440 x 900.
Safety Precautions
Caution This LCD monitor must be operated with the original accessories.
This set must be operated with the correct power supply.
Do not let children use this LCD monitor alone.
Viewing the User Manual for other safety precautions.
Quick Setup
The setup steps are described as following: (Step 2 to 4 are illustrated on the overleaf of the
cover.)
1. Shutdown your computer and unplug.
2. Please combine the LCD monitor with the stand tightly
3. Connect the 15-pin D-Sub (or DVI-D, optional) signal cable and Audio cable to the
computer and the LCD monitor.
4.Connect the LCD monitor power cord to AC power input socket firmly and completely.
5.Use the cable tie to bind up the power cord and the D-sub signal cable/ DVI-D cable.
6.After installation, please turn on the LCD monitor and the computer, respectively.
7.About function adjustment and troubleshooting, please refer to the content of the
CD-ROM.
3
PRODUCT
Note Save the original box and packing material for future shipping needs.
Contents
LCD monitor and Base. Please refer to Quick Setup.
Accessories for this LCD monitor Model. Please refer to Quick Setup.
Features
Bright image
Lightweight
Fast response time
Stereo speakers (If there is no speaker installed, please skip this item.)
Power saving features
Low electromagnetic radiation output
Kensington security lock
Safety certifications
Power saver
Power control system, also called (Power Saver), is installed inside the LCD monitor.
If the monitor has not been used for a certain period of time, the
system will turn the
monitor to low voltage mode to save power. Slight movement of the mouse
or any
pressing key on the keyboard will return the original image.
The VGA card inside the computer configures Power Saver. You can use your PC
to
set the function.
The LCD monitor is compatible with EPA ENERGY STAR and NÜTEK if used with a
VESA DPMS computer.
To save power, turn off the LCD monitor power when not in use.
Plug & play
The new VESA Plug and Play function is used, eliminating
the complicated and
time-consuming installation process.
Use the Plug and Play system without encountering the
usual installation problems.
Your computer system can easily identify and automatically adjust the monitor.
The LCD monitor uses Display Data Channel (DDC) to send E
xtended Display
Identification Data (EDID)
to the computer system, so the computer system can
auto adjust your monitor.
4
SAFETY
Note: Note the following safety precautions before using this monitor.
Electrical
Check the Voltage
This product should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.
Electrical Shock
This product is equipped with a 3-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the purpose of the
grounding-type plug.
To prevent electrical shock, do not insert any metal object into any opening in the
LCD
monitor casing.
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to qualified
service personnel.
If the power cord is damaged, do not use the
LCD monitor. Do not place any object on
the power cord, and place the power cord away from crowded areas.
While pulling the LCD monitor plug away from the socket on the wall, hold the plug not
the power cord.
Do not expose the LCD monitor to rain and do not use in environments near water
(such as in the kitchen, or near a swimming pool).
If the LCD monitor becomes wet, unplug the power cord immediately
and contact a
Service Center.
Unusual conditions
If the LCD monitor begins to perform abnormally, makes a noise, or emits smoke or
odors, unplug it immediately and contact a service center.
5
Common
Monitor
and Screen
Care
Avoid touching the screen with your fingers or any hard objects. Oil from the skin is
difficult to remove, and touching the screen with anything may damage the panel.
Clean the monitor using a soft, dry cloth after first turning it off.
The LCD monitor should not be used in dusty or humid environments.
The LCD monitor should be kept away from heat sources and radiation. Such as:
stoves, ovens, or direct sunlight.
To reduce glare, avoid placing the monitor in a place that receives direct sunlight.
Avoid letting small children play with monitor. Frequent touching of the panel will
leave
marks on the screen and lower the image quality.
Handle with care when unplugging and moving the monitor.
Do not place items on top of the LCD monitor.
If the LCD monitor is not in use for a long time, unplug
it and store it in the proper
package. The original carton and packaging should be used if possible.
The openings in the LCD monitor
casing are for ventilation. To prevent overheating,
the openings should not be blocked or covered. Do not place the LCD monitor on a
bed, sofa, blanket or other soft surfaces; as soft objects may block the vents in the
LCD monitor.
If you place the LCD monitor on a bookshelf or other enclosed space, it is essential to
leave an air-space of 4-inches (10cm) between the monitor and the enclosure.
Cleaning the screen
Ensure that the area around the LCD monitor is clean and free of moisture. Please
refer to "Maintenance" for normal maintenance information.
6
SET UP YOUR LCD MONITOR
Installation
Note: Read the last section “Safety” before you install the LCD monitor.
Notes
Note the instructions below prior to installing your LCD monitor.
Installation Position
For the best image quality, choose a position away from any windows to minimize
reflection of light on the panel.
It is important to view the LCD monitor from at least 30 cm to minimize eyestrain.
Workstation Height
Position the LCD monitor slightly above your horizontal vision.
Angle of Vision
Tilt the LCD monitor either forward or backward for the most comfortable viewing
angle.
Quick Installation
This LCD monitor supports connection to a personal computer or workstation. The
steps are described as Quick Setup.
After installation, refer to “Auto Adjust” for automatic adjustment procedures.
Screen
Adjustments
Auto Adjust
Though your computer system can automatically identify the new LCD monitor system,
the
Auto Adjust function can enhance the display. To enter adjust mode, refer to “OSD Control”.
Turn the computer and LCD monitor on.
Press the ‘Auto’ button to start Auto Adjust.
The LCD monitor starts the Auto Adjust process. The process will continue for 10
seconds. You will notice the image change as the Auto Adjust is working.
Self Test Function
Check (STFC):
Your LCD monitor provides a STFC function
, through which you can check whether
the LCD monitor is working properly.
If your LCD
monitor is properly connected, but there is no image showing and the
indicator light remains orange, follow these steps to start STFC.
Shutdown computer and LCD monitor.
Unplug the signal connector from the back of computer.
Turn the LCD monitor on.
If the image connector is disconnected or damaged, the following message
will
appear during normal operation.
Turn off the LCD monitor and reconnect the signal cable. Turn the
computer and
LCD monitor on.
If the LED on the LCD monitor remains orange
after completing the steps above,
check your VGA c
ard, cable, and computer system. Your monitor should be
operating properly.
7
OSD Control
The user-friendly OSD (On Screen Display) design enables you to
adjust your monitor
using the keypad on the front panel.
Keypad Button
Definition
1 Speakers
Audio output. ( If there is no speaker installed, please skip
this item.)
2
Turbo/
• Switch between picture, text and economy modes.
• Move selection up when OSD is displayed.
3
Auto/
• Automatically optimize positions, phase, and clock
when OSD is not displayed.
• Move selection down when OSD is displayed.
4 /
• Quick contrast adjustment and decrease
contrast/brightness.
• Move selection left when OSD is displayed.
5
/
• Quick brightness adjustment and increase
contrast/brightness.
• Move selection right when OSD is displayed.
6
Enter and exit the OSD menu.
7
Power On/Off button and indicator LED.
Green: Normal.
Orange: Power Saving.
Off: Power Off.
8
Operation
Your LCD monitor has been adjusted to its optimal setting
s before shipment. You can also
adjust the image using the following illustrations and steps.
Press the “Menu”
button to display the OSD.
Press the
▲
or
▼
button to select the function to be adjusted.
Press the
button to access the function to be adjusted.
Press the
or
buttons to change the current setting of the function.
To go back to the previous menu, press the
button
.
Changes are saved
automatically.
To exit the OSD menu press "Menu"
again.
-Position
50
Notes
The OSD turns off several seconds after you stop pressing the buttons while
performing an adjustment.
Any changes are auto
matically saved in memory when the OSD turns off. Turning off
the power should be avoided while using the menu.
Adjustments for clock, phase and positions are saved for each individual signal
timing. Except for these adjustments, all other adjustments have only one setting,
which applies to all signal timings.
To select function, click the blue cursor on the desired option.
Audio Menu (If there is
no speaker installed,
please skip this item.)
Misc. Menu
Image Menu
Info. Menu
Color Temp. Menu
9
Function Definition
Primary
Menu
Secondary
Menu
Description
Image Brightness
Adjust the brightness of the screen.
Contrast
Adjust the contrast of the image.
Sharpness
Adjust the picture sharpness of low resolution pictures.
Clock
Adjust the monitor clock. (Optional)
Phase
Adjust the monitor phase. (Optional)
H. Position
Move the image left or right on the screen. (Optional)
V. Position
Move the image up or down on the screen. (Optional)
Audio
Volume
A
djust the volume of the audio.
(If there is no
speaker
installed, please
skip this item.)
Mute
Disable the audio.
Color Color temp
User/9300K/7500K/6500K/sRGB
Red
Adjust red color.
Green
Adjust green color.
Blue
Adjust blue color.
Misc
Language
English, Français, Deutsch, Español, Italiano,
,
Русский, , ,
OSD time-out
Adjust OSD display time setting.
OSD position
Move OSD display position
to any one of the following 5
positions within the overall screen.
Reset
Restore LCD monitor to factory settings.
Input Select
Analog / Digital
Auto setting
Adjust clock, phase and positions automatically. (Optional)
CM Engine
Color Management Engine. (Optional)
Info Resolution
Displays resolution.
Horizontal
frequency
Displays horizontal frequency.
Vertical
frequency
Displays vertical frequency.
Version
Displays firmware version.
Quick Adjustment
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations:
Brightness: Press the Brightness button when the Menu is not displayed.
Contrast: Press the Contrast button when the Menu is not displayed.
Auto Setting: Press the Auto button when the Menu is not displayed.
Turbo:
Press the Turbo button when the Menu is not displayed to switch between
picture modes.
Picture Mode - High brightness
Text Mode - Normal
Economy Mode - Brightness of back-light is reduced
Changing to a lower brightness mode can lessen eye fatigue.
Change from Picture Mode to Text Mode when working with text.
Change from Text Mode to Economy Modes when viewing the screen for long periods.
3
1
5
2
4
10
TROUBLE SHOOTING
Check the information in this section to see if problems can be solved before requesting
repair.
Note Users should only attempt to solve the problems descri
bed below. Any
unauthorized product mo
dification, or failure to follow instructions
supplied with the product, will void the warranty immediately.
No image
Make sure power is ON.
Check whether the
LCD monitor and computer power cords are plugged in and
whether there is power.
No Signal Input
Check the signal connection between the computer and LCD monitor.
“Out Of Range”
Check the computer image output resolution and frequency and c
ompare the value
with the preset values.
Fuzzy image
Perform Auto Adjust, or adjust clock and phase.
Image too bright
Image too dark
Adjust brightness and contrast using OSD.
Irregular image
Check the signal connection between the computer and LCD monitor.
Perform Auto Adjust.
Distorted image
Reset the LCD monitor. (perform the “Reset” function using OSD)
Remove extra accessories (such as signal extension cord).
Image is not centered
Size is not appropriate
Use OSD Image Menu to adjust H. Position and V. Position.
Check image size setting.
Perform Auto Adjust.
Uneven color
Color too dark
Dark area distorted
White color is not white
Use OSD Color Menu to adjust color setting.
Can’t adjust the
LCD
monitor with the
buttons on the front
panel.
Can’
t display the LCD
monitor with resolution
1440x900
Contact the store where you purchased the unit or service center listed on
your
warranty card.
Please download the video card driver from websites below:
Nvidia : http://www.nvidia.com/content/drivers/drivers.asp
Intel : http://downloadfinder.intel.com/scripts-df/support_intel.asp
ATI : https://support.ati.com/ics/support/default.asp
Video chips below support the resolution 1440x900:
Geforce4 Ti4200 , Geforce FX5200 , Geforce PCX6200 ,
G5 Geforce FX5200 , ATI Radeon 9600 , ATI RadeonRX300
Matrox P750 , Nvidia Geforce2 , I865G , I915G
11
MAINTENANCE
This product has undergone strict quality control during the production process.
For
maintenance of the LCD monitor, refer to the information below. Maintenance is
important
for maximizing the display performance and product life.
Warning:
To prevent electrical shock, do not open the LCD monitor casing. Users
should not attempt to
repair the LCD monitor on their own. User
maintenance is limited to the procedures listed below.
Unplug the power
Unplug the LCD monitor from the AC socket before conducting maintenance.
Check the cover
Check to see if the LCD monitor and accessories are damaged or broken..
Clean
Never spray or pour any liquid directly onto the screen or case.
Do not allow water or liquid to enter the LCD monitor or accessories.
Cleaner
Use pure water or non-ammonia, non-alcohol based glass cleaner.
Do not use ketene (
such as acetone), ethanol, toluene, acetic acid, methane,
chloride, or abrasive detergent to clean the monitor because the
se chemicals
can damage the LCD monitor.
Screen
To clean your LCD monitor screen, use water or mild
cleaner, as above, to
gently moisten a soft, clean cloth.
If possible, use a special screen cleaner
sheet or a solution suitable for static
electricity application.
Case
To clean your LCD monitor case, use water or mild
cleaner, as above, to gently
moisten a soft, clean cloth.
Accessory
To clean your accessories, use water or mild cleaner, as above, t
o gently
moisten a soft, clean cloth.
Conserve
If the LCD monitor is not in use for a long time, please unplug and store in
the
original box in order to avoid any unexpected damage.
Disclaimer
Any damage resulting from use of any cleaner that is not mentioned above is not
covered under this warranty term.
12
SPECIFICATIONS
Size
19 inch (Diagonal 483.87mm)
Resolution
1,440 900 / WXGA
Display Color
16.2 M colors supported
Pixel Pitch
Horizontal 0.285mm Vertical 0.285mm
Brightness
300 cd/m
2
Contrast Ratio
500 : 1
Viewing Angle [max]
Horizontal 150 Vertical 130 °
Panel
Display Area
Horizontal 410.4 mm Vertical 256.5mm
Signal Input
Video Signal : 0.7Vpp 75
(Separate Synchronization and Composite Synchronization)
Sync. Frequency
Horizontal 30kHz~82kHz Vertical 56Hz~76Hz
Bandwidth
135 MHz
Input Connector
D-Sub / DVI-D
Input
Audio
Phone Jack, d=3.5mm
DC Adapter
AC100~240Volts, 50~60 Hz
Power Consumption (Operation Mode)
43 W (max)
Power Consumption (Saving Mode)
1W (max)
Temperature
5 ~ 35 (Working) / -20 ~ 55 (Storage)
Environment
Requirement
Humidity
20% ~ 80% (Working) / 20% ~ 85% (Storage)
Dimension [W X H X D]
444.4mm x 366.0mm x 185.0mm
Net Weight
4.5 kg
Display Mode Hori. Sync. (kHz) Vert. Sync. (Hz) Pixel Clock (MHz) Sync. Polarity (H/V)
31.469 59.940 25.175 -/-
37.861 72.809 31.500 -/-
VGA 640 x 480
37.500 75.000 31.500 -/-
35.156 56.250 36.000 +/+
37.879 60.317 40.000 +/+
48.077 72.188 50.000 +/+
SVGA 800 x 600
46.875 75.000 49.500 +/+
48.363 60.004 65.000 -/-
56.476 70.069 75.000 -/-
XGA 1024 x 768
60.023 75.029 78.750 +/+
WXGA 1440 x 900
55.935 59.887 106.5 -/+
1152 x 864
67.500 75.000 108.000 +/+
63.981 60.020 108.000 +/+
SXGA
1280 x 1024
79.976 75.025 135.000 +/+
DISPLAY MODE
If the signals are different, please refer to your computers Video Card U
ser Guide for
adjustment because the screens will not display or only the LED will light.
13
Congratulations!
You have just purchased a TCO’99 approved and labeled product! Your choice has
provided you with a product developed for professional use. Your purchase has also
contributed to reducing the burden on the environment and also to the further development
of environmentally adapted electronics products.
Why do we have environmentally labeled computers?
In many countries, environmental labeling has become an established method for encouraging the adaptation of
goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout
the world, there is a recognized concern for the materials and substances used by electronic products with regards
their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the
environment can be minimized.
There are also other characteristics of a computer, such as energy consumption levels, that are important from the
viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often
running continuously, resulting in unnecessary consumption of large amounts of energy and additional power
generation. From the standpoint of carbon emissions alone, it is vital to save energy.
What does labeling involve?
This product meets the requirements for the TCO’99 scheme which provides for international and environmental
labeling of personal computers. The labeling scheme was developed as a joint effort by the TCO (The Swedish
Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National Energy Administration)
Approval requirements cover a wide range of issues: environment, ergonomics, emission of electric and magnetic
fields, energy consumption and electrical safety.
Environmental criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated
flame retardants, CFCs (freons) and chlorinated solvents, and other materials. The product must be prepared for
recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country
where the company implements its operational policy.
Energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall
reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer
shall be reasonable for the user.
Labeled products must meet strict environmental demands, for example, in respect of the reduction of electric and
magnetic fields as well as physical and visual ergonomics.
Below you will find a brief summary of the environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 STOCKHOLM, Sweden
Fax: +46 8 782 92 07
E-mail (Internet): developm[email protected]
Current information regarding TCO’99 approved and labeled products may also be obtained via the Internet, using
address: http://www.tco-info.com/
14
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame
retardant substances. Most flame retardants contain bromine or chlorine, and those flame retardants are chemically
related to PCBs. Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise
to health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative*
processes when not disposed of in accordance with strict standards for disposal.
The relevant TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame
retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since
no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. The
relevant TCO’99 requirement states that batteries, the colour-generating layers of display screens and the electrical or
electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. The relevant TCO’99 requirement states that batteries
may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics
components associated with the labeled unit. There is however one exception. Mercury is, for the time being,
permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO
aims on removing this exception when a mercury free alternative is available.
CFCs (freons)
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and
assembly of the product or in its packaging. CFCs (freons) are sometimes used for washing printed circuit boards.
CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on
earth of ultraviolet light. This restriction assures that further damage to the ozone layer form this type of equipment will
be eliminated.
Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. The relevant TCO’99 requirement
permits the inclusion of lead since no replacement has yet been developed.
_____________________________
* Bio-accumulative is defined as substances which accumulate within living organisms.
**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.
15
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
Fujitsu fa-19w1s-h2a User manual
- Category
- TVs & monitors
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
