2. TOOLCRAFT
  3. 2568479 LED Work Light (60 W)

TOOLCRAFT 2568479 LED Work Light (60 W) Operating instructions

  • I have reviewed the dismantling instructions for the LED Work Light model 2568479. This document provides step-by-step guidance on disassembling the device, including screw removal, opening the lampshade, and disconnecting wires. I am now ready to answer any questions you might have about the dismantling process.
  • What is the first step in dismantling the light fixture?
    How many red plastic housings need to be removed?
    What should be used to disconnect the wires from the switch?
1
Dismantling Instructions
LED Work Light (60 W)
Item no: 2568479
1 Dismantling recommendations
■Disconnect from power supply.
■Ask help from a professional if needed.
2 Dismantling instructions
Step 1
Remove 12pcs of screws from the front of the light fixture by using a screwdriver.
Step 2
Remove 2pcs of the red plastic housings.
Step 3
Remove 18pcs of screws from the back of the fixture by using a screwdriver.
Step 4
Remove a black plastic housings.
Step 5
Open the PC lampshade.
Step 6
Remove 6pcs of screws on the PCB by using a screwdriver.
Step 7
Open the lamp module.
2
Step 8
Remove the three wires which are connecting the switch by using a screwdriver to press the
connection terminal.
Step 9
Short-circuit the grey and black connection terminals with the wire.
Step 10
Remove 4pcs of screws by using a screwdriver to secure the PCB of the power supply.
Step 11
Cut the input line L/N by using a scissor and keep 7-10mm length from the wire ends.
Step 12
Remove the driver with LED module for SLR testing.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2568479_V1_0622_hs_en 580287755 I1/O1 en
/