2. MGC
  3. DSPL-420DS Main Display Module

MGC DSPL-420DS Main Display Module Owner's manual

  • I've reviewed the datasheet for the Mircom DSPL-420DS Display Module. It describes a device with a 4-line backlit LCD, tactile membrane switches, and multiple control buttons for fire alarm systems. It also has four status queues: Alarm, Supervisory, Trouble, and Monitor. I'm ready to answer questions you might have about this display module.
  • What type of display does the DSPL-420DS have?
    What are the four status queues provided by the DSPL-420DS?
    What kind of switches does the DSPL-420DS use?
Canada
25 Interchange Way Vaughan, ON L4K 5W3
Telephone: (905) 660-4655 | Fax: (905) 660-4113
U.S.A.
4575 Witmer Industrial Estates Niagara Falls, NY 14305
Toll Free: (888) 660-4655 | Fax Toll Free: (888) 660-4113
www.mircom.com
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND
NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY.
For complete and accurate technical information relating to performance,
installation, testing and certification, refer to technical literature. This document
contains intellectual property of Mircom. The information is subject to change
by Mircom without notice. Mircom does not represent or warrant correctness
or completeness.
Ordering Information
CATALOG NUMBER 5332
Rev. 0
Description
The DSPL-420DS Main Display Module provides a 4 line by
20-character backlit LCD display, Common Control buttons
and Four Status Queues with selector switches and LEDs for
Alarm, Supervisory, Trouble and Monitor. The DSPL-420DS
occupies one display position in the BBX-FXMNS enclosure.
The DSPL-420DS comes with a user-friendly menu. Common
Control switches and/or indicating LEDs for System Reset,
Signal Silence, Fire Drill, Acknowledge, General Alarm, Lamp
Test, A.C. On, Pre-Alarm and Ground Fault.
Features
• New robust and tactile membrane switches
• 4 line by 20-character LCD display
• Backlit display
• User-friendly Menu
• Common Control buttons with selector switches and LEDs
• Four Status Queues: Alarm, Supervisory, Trouble and
Monitor
• Occupies one display position in the BBX-FXMNS
enclosure
• Compatible with FX-2000, FleX-Net™ (FX-2000N) and
MMX Fire Alarm panels
MAIN DISPLAY MODULE DSPL-420DS
Model Description
DSPL-420DS 4 Line by 20 Character Backlit LCD Display
Power Consumption
Amps (24VDC)
Stand by 30 mA
Alarm 30 mA
firealarmresources.com
/