Fits Seatstays
& Chainstays
≤ ø 28 mm
28 mm
QUICK START TO USE TUNE-UP STAND FUNCTION
EN
User's Guide
TRANSFORMER™ STAND DX
Transformer™ Stand DX fits
most bikes, however, it will not
work with bikes that do not have
seatstays or chainstays.
DO NOT use on grass, loose dirt,
gravel, uneven or soft surfaces.
Check the stability of the
Transformer™ Stand DX
periodically to insure safe
storage of your bikes.
Use the QR locking lever to open or close the support legs completely.
OPERATING INSTRUCTIONS
Use 3mm Allen key to adjust the
torque of screws if necessary.
Use 3mm Allen key to adjust the
torque of screws if necessary.
Locking Lever
Seatstay
Folding Hook
Chainstay
Folding Hook
Support Legs Adjust
Close to
Unlock
Open to
Lock
Close hook and slide to adjust to proper height. Open hook to lock in position.
3mm Allen key
3mm Allen key
25 kg
MAXIMUM BIKE
WEIGHT CAPACITY
Recommended Torque:
1-1.2 Nm (8.85-10.62 in-lb)
Recommended Torque:
1-1.2 Nm (8.85-10.62 in-lb)
Avoid bodily harm when folding
support legs.
1
2
Place Transformer™ Stand DX
next to your bike. Adjust the
height of each Folding Hook as
shown keeping a height
difference of 3 cm between
Folding Hook and seatstay/
chainstay.
Lift bike onto Folding Hooks then fine
tune height adjustment as necessary.
12
3 cm
3 cm
2-year Warranty: All mechanical components
against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your
original sales receipt. Items returned without a
sales receipt will assume that the warranty
begins on the date of manufacture. All
warranties will be void if the product is
damaged due to user crash, abuse, system
alteration, modification, or used in any way not
intended as described in this manual.
* The specifications and design are subject to
change without notice.
Please contact your Topeak dealer with any
questions. For USA customer service,
call: 1-800-250-3068
www.topeak.com
WARRANTY
WARNING
Be aware of the distance between
wheel and support legs and insure
there is no interference while
operating the crank.
DO NOT PUT ANY WEIGHT ON BIKE.
M-TTF-SD02 EN 08/16
Copyright © Topeak, Inc. 2016
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Cannondale Scalpel Owner's manual
-
-
Yeti Cycles 575 Owner's manual
-
-
-
Yeti Cycles 575 Owner's manual
-
-
-
FLX BLADE 2.0 User manual
-
