Gryphon Commander Operating instructions

Brand: Gryphon

Model: Commander

Type: Operating instructions

THE GRYPHON

COMMANDER

PREAMPLIFIER

UNPACKING AND SET-UP

INSTRUCTIONS

PLEASE READ THESE INSTRUCTIONS FIRST

2

DC-4 cable DC-4 cable

Green bias cable

Packing list

Gloves

Owners manual

Polish cloth

Remote

Coasters

DC-77 cable Felt

UNPACKING

ACCESSORIES

3 4

1 2

3

3.

Slide the unit in.

4.

Put down the front end spikes at the felt.

1.

Place the two pieces of felt

on the front edge of the shelf.

2.

Put down the rear end on the most

rear piece of felt.

Filt

PLACING IN A RACK

4

5.

Align the unit as desired.

6.

Carefully lift and replace the felt

with the coasters.

7.

Carefully lift and replace the felt

with the coasters.

8.

Please refer to owners’ manual for

electrical set-up.

6.1

6.2

7.1

7.2

PLACING IN A RACK

1
2
3
4

Gryphon Commander Operating instructions

Brand: Gryphon

Model: Commander

Type: Operating instructions

Other documents