2. JasonL
  3. HQSB2128.W.WT.GS

JasonL HQSB2128.W.WT.GS, HQSB2148.W.WT.AB, HQSB2168.W.WT.GS, HQSB2188.W.WT.GS Operating instructions

  • Hello, I'm your chat assistant. I've reviewed the assembly instructions for the Horizon Quadro Square 2P workstation. This document details the steps needed to put together your new workstation. It also specifies required tools like a power screwdriver and an Allen key set and emphasizes that assembly will require two people. I am now ready to assist you with any questions you might have regarding the assembly or usage of this workstation.
  • What tools are required for assembly?
    How many people are required for installation?
    What sizes are available for the workstation?
ASSEMBLY INSTRUCTIONS
Horizon Quadro Square
2P workstation
Sizes: 1200, 1400, 1600, 1800 mm
Page 1 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Horizon Quadro Square
2P workstation
Sizes: 1200, 1400, 1600, 1800 mm
Table top x2
Leg Quadro Square x4
Beam x2
Plastic bracket x8
A
B
C
D
Allen key x2I
M8x20MM CSK x4
M8x20MM Socket head x4
M6x20MM Socket head x8
M6x30MM Socket head x8
E
F
G
H
COMPONENTS
SCREWS
Page 2 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
C
D
E F G H
A
B
F
G
ASSEMBLY INSTRUCTIONS
Horizon Quadro Square
2P workstation
Sizes: 1200, 1400, 1600, 1800 mm
STEP 01
Using Allen Key provided, attach 2 plastic brackets per leg (D)
(as per picture above) using M6x20MM (G) Socket head screw.
Using Allen Key provided, attach M8x20MM Socket head (F)-
screw socket half way into leg for all legs (B).
STEP 02
Page 3 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Quadro Square
2P workstation
Sizes: 1200, 1400, 1600, 1800 mm
STEP 03
Adjust extendable beam (C) to desired
length using markers and secure beam
at that length using screws provided
Page 4 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Horizon Quadro Square
2P workstation
Sizes: 1200, 1400, 1600, 1800 mm
Attach beam (C) to legs (B) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (C) with Socket (E)
Page 5 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 05
STEP 04
TOP VIEW
E
E
ASSEMBLY INSTRUCTIONS
Horizon Quadro Square
2P workstation
Sizes: 1200, 1400, 1600, 1800 mm
STEP 06
Page 6 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktops ontop of frame - with cutout at the back of the
desk. Nut inserts in top will align with plastic joiner brackets
using M6x30MM (H) sockets attached tops to frame.
H
TABLE TOP
BOTTOM VIEW
nut insertnut insert
nut insertnut insert
ASSEMBLY INSTRUCTIONS
Horizon Quadro Square
2P workstation
Sizes: 1200, 1400, 1600, 1800 mm
STEP 07
Page 7 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Under the desktops, use l-shaped panel brackets to secure
the screens to the desktops. Place two brackets in each
screen (4 L-Shaped bracket in total).
/