2. HAMILTON SINKLER
  3. BATR4007 Towel Ring

HAMILTON SINKLER BATR4007 Towel Ring Installation guide

  • Hello! I've reviewed the installation guide for the Towel Ring BATR4007. This document provides step-by-step instructions for mounting the towel ring including drilling, securing the bracket, and tightening the set screw. I'm here to help with any questions you may have about the installation process.
  • What size hole do I need to drill for the anchors?
    What size drill bit should I use to make the screw holes?
    What tool is used to tighten the set screw?
info@hamiltonsinkler.com
www.hamiltonsinkler.com
Tel: 212-760-3377
1 of 1
Bath Suites - BATR4007
Towel Ring Installation & Template
63
8
"
61
4
"
21
2
"
3
4
"
11
4
"
DRILL 7/32" HOLE THROUGH
SCREW
MOUNTING BRACKET
ALLEN WRENCH
SET SCREW
COVER BACK PLATE
DRYWALL ANCHOR
RING
1. Mark two screw holes at reqired location through mounting bracket (top and bottom)
2. Drill 5/16” hole and insert anchors
3. Secure mounting bracket using two fasteners
4. Position cover plate and towel ring over bracket and tighten set screw from the bottom using an allen wrench
BA103
/