2. Office
  3. Office furniture
  4. Multimedia carts & stands
  5. Luxor
  6. AV26

Luxor AV26 Operating instructions

  • Hello! I'm your chat assistant and I've reviewed the instructions for the LUXOR AV26 AV Cart. This document details how to assemble the two-shelf steel cart, attach the casters, mount the power strip, and set up the cord wrap. I'm ready to answer any questions you may have about assembling or using this cart.
  • What tools are needed for assembly?
    How many locking and non-locking casters each are there?
    Where is the cord wrap mounted?
• Flip the shelf unit upside down on a carpet or other non-
scratch surface.
• Insert the non-locking casters (C) into the wheel sockets
on one of the narrow ends
• Insert the locking casters (D) into the wheel sockets on
the opposite end.
TOOLS REQUIRED:
- Screwdriver
AV26 Instructions
26” Two-Shelf Steel AV Cart
PARTS LIST:
A X 1 B X 1
Casters no brakes
E X 1 F X 1 G X 2
Casters w/brakes
C X 2
D X 2
H X 2
Shelf Unit Mat Power Strip Cord Wrap Bolts Wing Nuts
ASSEMBLY INSTRUCTIONS:
E
F
H
H
(Power strip
mount holes)
G
G
• Flip the shelf unit back over.
• Ensure the mat is correctly in place on your desired shelf.
• Select a set of power strip mount holes at one of the
narrow ends of the top shelf.
• Push the bolts (G) through the corresponding holes in the
power strip (E).
• Push the bolts through the corresponding holes in the
cord wrap (F).
• Push the bolts through the power strip mount holes at
end of top shelf.
• Use the wing nuts (H) and screwdriver to fasten power
strip and cord wrap to the cart.
• Unlock the casters to allow the wheels to spin freely.
• Lock the casters to keep the cart in place.
4
(narrow end)
(narrow end)
(power strip
mount holes)
1 2
3
/