Luxor AV26 Operating instructions
- Category
- Multimedia carts & stands
- Type
- Operating instructions
• Flip the shelf unit upside down on a carpet or other non-
scratch surface.
• Insert the non-locking casters (C) into the wheel sockets
on one of the narrow ends
• Insert the locking casters (D) into the wheel sockets on
the opposite end.
TOOLS REQUIRED:
- Screwdriver
AV26 Instructions
26” Two-Shelf Steel AV Cart
PARTS LIST:
A X 1 B X 1
Casters no brakes
E X 1 F X 1 G X 2
Casters w/brakes
C X 2
D X 2
H X 2
Shelf Unit Mat Power Strip Cord Wrap Bolts Wing Nuts
ASSEMBLY INSTRUCTIONS:
E
F
H
H
(Power strip
mount holes)
G
G
• Flip the shelf unit back over.
• Ensure the mat is correctly in place on your desired shelf.
• Select a set of power strip mount holes at one of the
narrow ends of the top shelf.
• Push the bolts (G) through the corresponding holes in the
power strip (E).
• Push the bolts through the corresponding holes in the
cord wrap (F).
• Push the bolts through the power strip mount holes at
end of top shelf.
• Use the wing nuts (H) and screwdriver to fasten power
strip and cord wrap to the cart.
• Unlock the casters to allow the wheels to spin freely.
• Lock the casters to keep the cart in place.
4
(narrow end)
(narrow end)
(power strip
mount holes)
1 2
3
-
1
Luxor AV26 Operating instructions
- Category
- Multimedia carts & stands
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI