D+H Montage ZA Operating instructions

Hello! I'm your chat assistant and I've reviewed the provided document which details the mounting information for D+H's rack and pinion drives, specifically the WK6 and FK models. The document includes diagrams showing how these drives are mounted on top-hung sashes and highlights important considerations, like weight of the window wing and slewing range. I'm ready to answer any questions you have about this installation.
What should be observed regarding the window wing?

What brackets are used for mounting the drives?

What is mentioned regarding slewing range?

99.950.55 1.2/05/03

Mounting Information

D+H Mechatronic AG • Georg-Sasse-Str. 28-32 • D-22949 Ammersbek • Tel. +4940-60565219 • Fax +4940-60565264

wing bracket

bracket WK6

locking screw

with

counter nut

stud

Rack and Pinion Drives on a Top-Hung Sash,

opening outward

in connection with brackets WK6 and FK

Attention

Observe weight of window wing including glass!

(Glass of 1mm strength has a weight of 2,5kg/m²)

Observe

slewing range

Pivot-hung window closed Pivot-hung window open