iPort 72356 User manual

Brand
iPort
Model
72356
Type
User manual

Below you will find brief information for CONNECT 72356. The IPORT CONNECT Wall Mount is designed to securely hold and charge your IPORT CONNECT Case. It includes options for new constructions using Cat6 cable and existing constructions also using Cat6 cable. The mount covers a 1G electrical box. It uses a mounting bracket which snaps into the case and is then screwed to the mount. The system uses a PoE+ Network Adapter for power and network connectivity and the case is secured to the mount with security screws.

Below you will find brief information for CONNECT 72356. The IPORT CONNECT Wall Mount is designed to securely hold and charge your IPORT CONNECT Case. It includes options for new constructions using Cat6 cable and existing constructions also using Cat6 cable. The mount covers a 1G electrical box. It uses a mounting bracket which snaps into the case and is then screwed to the mount. The system uses a PoE+ Network Adapter for power and network connectivity and the case is secured to the mount with security screws.

CONNECT
MOUNT
1
WALLMOUNT
72356 - CONNECT Wall Mount Black
CONNECT
MOUNT
2
WALLMOUNT
IPORT CONNECT Wall Mount
Install Manual
Whats in box:
1 - IPORT CONNECT Wall Mount bracket
1 - Info Card
1 - PoE+ Network Adapter (72101)
4 - Drywall Anchors
4 - #6 HighLow thread Screws
1 - Molex Male to Female extension cable
1 - Mounting Bracket
4 - Philips machine screws
Glossary of Terms:
• WallMount - The fully assembled CONNECT
MOUNT holding and charging the IPORT CONNECT
Case.
• Mounting Bracket - The removable plastic insert that
attaches to the CASE connecting the CASE to the Wall
Mount bracket
• IPORT Security Tool - The orange handled 1.5mm hex
tool used for locking and unlocking IPORT
Products.
Product Info Page - www.iportproducts.com/connect-
Mount
Thank you for purchasing the all new IPORT
CONNECT Platform. We hope you enjoy this
revolutionary new system and if at any time you
need more assistance please contact IPORT Tech
Support via Online chart or through our help desk.
- IPORT Team
CONNECT
MOUNT
3
WALLMOUNT
Before starting, determine the install scenario
that best describes your desired install. Then
click on the title to be directed to the
appropriate install steps.
New Construction using Cat 6 Cable | pg. 4
Existing Construction using Cat 6 Cable | pg. 15
MOUNT INSTALL OPTIONS
CONNECT
MOUNT
4
WALLMOUNT
1. Determine the desired location of the
IPORT CONNECT WallMount will live
when the construction is completed.
IPORT CONNECT WallMount Install
New Construction - Cat6
Before Construction is complete
CONNECT
MOUNT
5
WALLMOUNT
2. Install a 1 Gang electrical box or low
voltage ring in the desired location
of the Mount.
NOTE: The CONNECT WallMount will cover a 1G
electrical box only. A 2 Gang electrical box will
interfere with the mounting hardware.
1G
Electrical
Box
New Constructions Cat6
CONNECT
MOUNT
6
WALLMOUNT
3. Run a Cat6 cable terminated with an
RJ45 Connectors (T568A or T568B)
from the WallMount location to a
network rack location and terminate
the other end of the cable the same
as before.
NOTE: Make sure to secure the Cat6 cable
appropriately onto the Electrical box or Low
Voltage ring to retrieve at a later time.
New Constructions Cat6
CONNECT
MOUNT
7
WALLMOUNT
Installing the Mount After Construction
4. Terminate the Cat6 with an RJ45
Connector if not done so previously
using T568A or T568B standards.
5. Remove the Mount, Drywall
anchors and Screws from the box
and place on a table.
x4
x4
New Constructions Cat6
CONNECT
MOUNT
8
WALLMOUNT
6. Insert the WallMount over the 1G
box.
New Constructions Cat6
CONNECT
MOUNT
9
WALLMOUNT
7. Use a leveling tool to level the Wall
Mount and mark the 4 locations
for the provided anchors. Remove the
WallMount from the 1G Box.
8. Screw the 4 provided anchors into
the wall where marked.
New Constructions Cat6
CONNECT
MOUNT
10
WALLMOUNT
9. Connect the Molex Extension
Cable to the Poe+ Network adapter
making sure the gold pins are facing
away from the molex connector.
10. Feed the cable though the hole in
the mount.
New Constructions Cat6
CONNECT
MOUNT
11
WALLMOUNT
11. Connect the Cat6 Cable to the
Network Adapter and attach
the Network Adapter onto the
Connect Mount.
CONNECT
MOUNT
12
WALLMOUNT
12. Insert the Mount back into the
1G box and use the provided screws
to attach the Mount to the wall
making sure to level the mount
before tightening the screws.
New Constructions Cat6
CONNECT
MOUNT
13
WALLMOUNT
13. Insert the CONNECT mounting
bracket into the CONNECT CASE
making sure the bracket snaps into
place securely.
New Constructions Cat6
CONNECT
MOUNT
14
WALLMOUNT
14. Place the Case onto the MOUNT in
the desired portrait or landscape
orientation. Feed the IPORT Molex
cable though the center of the
mounting bracket.
New Constructions Cat6
CONNECT
MOUNT
15
WALLMOUNT
15. Use the provided 4 machine screws
to attach the Mounting Bracket to the
CONNECT Mount Bracket.
16. Plug the molex connector from the
Mount into the cable on the
CONNECT CASE. Note the gold pins
are facing outward when
connecting into the Mount cable.
Press the Mount cable into the
channel to hold and secure the cable
out of the way of the iPad.
New Constructions Cat6
x4
CONNECT
MOUNT
16
WALLMOUNT
17. Insert the iPad into the attached
Case and install the top onto the
Case.
CONNECT
MOUNT
17
WALLMOUNT
18. Use the provided IPORT Security
tool to lock the Case top onto the
Case securing the iPad.
New Constructions Cat6
COMPLETE
CONNECT
MOUNT
18
WALLMOUNT
Installing the Mount in Existing
Construction - Cat6
1. Determine the desired location of
the IPORT CONNECT WallMount.
2. Use a 2-3/4” (70mm) hole saw to cut
a hole in the desired location of the
Wall Mount.
X
CONNECT
MOUNT
19
WALLMOUNT
3. Insert the Wall Mount into the 2-3/4
- inch hole and use a leveling tool to
level the Mount. Mark the 4 locations
for the provided Anchors.
4. Remove the WallMount from the
wall once you have marked the 4
anchor locations.
Existing Constructions Cat6
CONNECT
MOUNT
20
WALLMOUNT
5. Screw the provided anchors into the
wall where marked.
Existing Constructions Cat6
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29

iPort 72356 User manual

Brand
iPort
Model
72356
Type
User manual

Below you will find brief information for CONNECT 72356. The IPORT CONNECT Wall Mount is designed to securely hold and charge your IPORT CONNECT Case. It includes options for new constructions using Cat6 cable and existing constructions also using Cat6 cable. The mount covers a 1G electrical box. It uses a mounting bracket which snaps into the case and is then screwed to the mount. The system uses a PoE+ Network Adapter for power and network connectivity and the case is secured to the mount with security screws.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents