Legrand 4 120 15 User manual

4 120 15
Legrand
Brand
Legrand
Model
4 120 15
Type
User manual

Legrand 4 120 15 is a connected energy meter that allows you to monitor your electricity consumption in real-time. It can be installed in your home's electrical panel and connected to your Wi-Fi network. Once connected, you can use the Legrand Home + Control app to track your energy usage, set goals, and receive alerts when you're using too much energy. The app also allows you to control your energy usage remotely, so you can turn off appliances and lights when you're away from home.

Legrand 4 120 15 is a connected energy meter that allows you to monitor your electricity consumption in real-time. It can be installed in your home's electrical panel and connected to your Wi-Fi network. Once connected, you can use the Legrand Home + Control app to track your energy usage, set goals, and receive alerts when you're using too much energy. The app also allows you to control your energy usage remotely, so you can turn off appliances and lights when you're away from home.

83 mm
17.7 mm
Connected energy meter
4 120 15 - 1 991 18
LE12267AH
Composition
Imperative security precaution
The instructions for installation and use must be strictly observed in order
to avoid the risk of electric shock or fire.
Connected energy meter
Ø10.2 mm
Measure coil
Cable lenght: 800mm
Ø26.45 mm
+
Imax=80A AC
Pay attention to the direction of the current
Per
circuit
F
80A MAX
2,4 à
2,4835Ghz
<100 mW
+5°C
+45°C
100-240V~
50 / 60Hz
UI
measure
+/-1%
under 63A
kWh
Accuracy
kWh
Measure
TGlobal
or
Requires the installation of a:
Connected Starter Pack
"... with Netatmo"
Gateway module
OR OR
CE Directive
Compliant with the following European directive:
Low voltage directive
(LVD) 2014/35/UE
Electromagnetic compatibility
(CEM) n° 2014/30/UE
Any kind of
“with Netatmo”
gateway
2
Wiring
8mm
Preparation, connexion
1
OFF
3.5 mm
A circuit breaker with rated current C2 to C16 is necessary depending on wire
section used for supplying the energy meter.
MAX
2x 1.5mm²
1.5mm²
V1, N:
0.5Nm
N (neutral) = blue L (Line) = Everything but blue and green/yellow
Connection
of the power supply
Connection
of the measure coil
Direction of the
current indicated
on the coil
V1
L
N
N
LN
NL
4 120 15
Measure coil
*: Do not use on a three Lines electrical installation.
*
Turn off the power
at general
circuit breaker
Add the in a connected installationEnergy meter
OFF ON
Turn on the power at the
general circuit breaker*
once the installation
completed and controlled**
3
2
Turn off the power at
general circuit breaker
Press the the configuration button of the
Energy meter (> 5 seconds) until the configuration
indicator lights up in fixed red.
It is no longer associated with the gateway
present in the installation.
>5s
Reset an Energy meter
to remove it from a connected installation
Download the Home + Control App and follow
the instructions for adding the connected
product in your setup.
You also have the option of controlling your installation via a voice assistant.
and can customize your scenarios via the Home + Control App.
Finalize the installation in the Legrand Home + Control app
3
* In order to restart all connected products at the same time.
**: After wiring the installation, refit the front plate so that
no active live part is accessible.
4
LEGRAND - Pro and Consumer Service - BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com
www.legrand.fr/reference/412015
The undersigned,
Legrand
declares that the radio equipment listed on this instruction sheet
are compliant to the directive 2014/53/UE.
The full text of the UE declaration of conformity
is available at the following website:
www.legrandoc.com
UE SIMPLIFIED DECLARATION OF CONFORMITY
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Legrand 4 120 15 User manual

4 120 15
Legrand
Brand
Legrand
Model
4 120 15
Type
User manual

Legrand 4 120 15 is a connected energy meter that allows you to monitor your electricity consumption in real-time. It can be installed in your home's electrical panel and connected to your Wi-Fi network. Once connected, you can use the Legrand Home + Control app to track your energy usage, set goals, and receive alerts when you're using too much energy. The app also allows you to control your energy usage remotely, so you can turn off appliances and lights when you're away from home.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents