BT500-PROBETIP

Fluke BT500-PROBETIP User guide

  • Hello! I've reviewed the Quick Reference Guide for the FLUKE BT508, BT510, BT520, and BT521 Battery Analyzers. This guide provides a concise overview of the devices' functionalities, including voltage, ripple voltage, internal resistance, and temperature measurements(BT521). It also touches upon functionalities like data saving, uploading and calibration. I'm ready to answer your questions about these devices.
  • What should I do before using the device?
    How can I save the measurement?
    How can I perform a 0-Ohm calibration?
Small Hole
Cylinder Screw
Cube
Circle
Strip
Cylinder Clamp
UPS
UPS
UPS
AUX Current / 辅助电流
Mobile Apps (BT521 Only) /
移动设备
(仅限BT521)
Connect Test Probes / 连接测试探针
TL175 Operation / TL175 操作
/ Discharge Volts / Ripple Volts / 内阻 /
放电电压 / 纹波电压
TL175
PN 4453956 April 2014
© 2014 Fluke Corporation. All rights reserved.
BT508/BT510/BT520/BT521
Battery Analyzer
Quick Reference Guide / 快速参考指南
Warning / 警告
To prevent possible electrical shock, fire, or personal
injury, read the “BT508/BT510/BT520/BT521 Safety
Sheet” before you use this Product.
为了防
止可能发生的电击、火灾或人身伤害,使用本产品
前请阅读《BT508/BT510/BT520/BT521 安全说明书》。
Go to www.fluke.com to register your product, download
manuals, and find more information
请至 www.fluke.com 注册您的产品、下载手册,并获取更
多信息
Temperature (BT521 Only) / 温度 (仅限BT521)
BTL21 Test Lead /
BTL21 测试探头
1
2
0-Ohm Calibration Board /
0-Ohm校准板
Save / 保存
Save / 保存
Calibration (“0-Ohm”) / 校准 (0-Ohm) Meter / Sequence / 切换到Meter 模式 /
切换到Sequence 模式
Charge Battery / 电池充电
Save / 保存 Replace Test Tip / 更换测试探头 Manual Save / 手动保存 Enable Auto Save in Setup Menu /
可在设置菜单里启用自动保存。
Upload / Download Data / 上传/下载数据
View Memory / 查看存储
/