Spectrum Industries 99041B User manual

Type
User manual

This manual is also suitable for

1
Innovative Power + Data Solutions
10 Mountain View Drive • Shelton, CT 06484 • P:800.521.3175 • F:203.924.6687 • www.electri-cable.com
©ECA–January2013—ProductspecicaonssubjecttochangewithoutnoceRLSEISLEUSB012113
Seclusion™ Installation Instructions
TABLE
TABLE
Under Table Mounting
SECL-1-USB Shown
Seclusion
Unit
Table Mount
Under Table
#8 Flat Head Screws
2 Provided
#8 Flat Head
Screws
#10 Screws
2 Required
#10 Screws
2 Required
Table Top Mounting
1. Determine if Seclusion is to be top or under table mounted, see
illustrations above.
2. Attach either Table Mount or Under Table Bracket to Seclusion
using 2 #8 flat head machine screws, provided. Note: On un-
der table mount forward edge of Seclusion to be a minimum of
1” back from table edge.
3. Determine location for Seclusion and attach to table, as
shown, using 2 #10 screws, provided (Note: Use caution to not
pierce top surface of table with screws, minimum table thick-
ness .75” thick).
4. Make data connections if required (use caution when snap-
ping RJs into faceplate to prevent them from falling into Seclu-
  • Page 1 1

Spectrum Industries 99041B User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI