2. Kentrol
  3. 30480

Kentrol 30480 Installation guide

  • Hello, I've analyzed the installation instructions for the 30480 Gas filler Neck. This document details the steps for removing the old filler neck, installing the new stainless steel one using provided screws and the recommendation to use anti-sieze on threads. I'm ready to answer any questions you have about the installation process or the product.
  • What should be removed before installation?
    What type of screws are used to install the new filler neck?
    How should the screws be placed?
    What additional step is recommended during installation?
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTION
Part Number 30480 Gas filler Neck Part Number 30480 Gas Filler Neck
Remove the gas cap and the plastic holding strap.
Remove the gas cap and the plastic holding strap.
Remove the eight screws holding the existing filler neck.
Install the new Stainless Steel gas filler neck using the
stainless screws provided. The four 3/4” Lg. Screws go
on the outside and the long screws go on the inside.
We recommend that you use anti-sieze on all threads
of the stainless bolts provided with your parts.
Remove the eight screws holding the existing filler neck.
Install the new Stainless Steel gas filler neck using the
stainless screws provided. The four 3/4” Lg. Screws go
on the outside and the long screws go on the inside.
We recommend that you use anti-sieze on all threads
of the stainless bolts provided with your parts.
/