INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTION
Part Number 30480 Gas filler Neck Part Number 30480 Gas Filler Neck
Remove the gas cap and the plastic holding strap.
Remove the gas cap and the plastic holding strap.
Remove the eight screws holding the existing filler neck.
Install the new Stainless Steel gas filler neck using the
stainless screws provided. The four 3/4” Lg. Screws go
on the outside and the long screws go on the inside.
We recommend that you use anti-sieze on all threads
of the stainless bolts provided with your parts.
Remove the eight screws holding the existing filler neck.
Install the new Stainless Steel gas filler neck using the
stainless screws provided. The four 3/4” Lg. Screws go
on the outside and the long screws go on the inside.
We recommend that you use anti-sieze on all threads
of the stainless bolts provided with your parts.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
Other documents
-
BRISTERS Trail Wagon User manual
-
Bull Dog BD300A User manual
-
Factory Five Racing Mk4 Roadster Assembly Manual
-
American Sportworks TW265 Operating instructions
-
Factory Five Racing Mk3 Roadster Assembly Manual
-
StopTech Automobile Accessories 98-139-1470 User manual
-
XtremeVAC DCL800TM '02-'04 User manual
-
-
StopTech TOYOTA 98-857-1470 User manual
-
Edelbrock Edelbrock Pro-Tuner Supercharger #1585 For 2005-09 Mustang GT 4.6L 3V W/O Tune Installation guide
