Celexon basic line Faltrahmenleinwand 16:9, 80" Owner's manual
- Category
- Projection screens
- Type
- Owner's manual
Bedienungsanleitung
celexon basic line
Faltrahmenleinwand
TM
celexon
Vielen Dank, dass Sie sich für ein Produkt von celexon basic line entschieden haben.
Lesen Sie die Anleitung bitte aufmerksam durch, bevor Sie das Produkt
benutzen und bewahren Sie diese gut auf!
• Beginnen Sie nicht mit der Montage, bevor Sie die komplette Bedienungsanleitung
gelesen und diese verstanden haben.
• Dieses Produkt sollte nur von Fachpersonal mit mechanischen Kenntnissen
installiert werden.
• Führen Sie die Installation mit einer weiteren Person durch um eine sichere Montage
zu gewährleisten.
• Ziehen Sie die Schrauben fest, aber überdrehen diese nicht. Ein zu festes Anziehen
kann Schäden verursachen und den sicheren Halt der Leinwand beeinträchtigen.
• Dieses Produkt ist für den Gebrauch innerhalb von Gebäuden bestimmt. Die
Benutzung im Freien könnte zu Schäden am Produkt führen, sofern nicht das dafür
vorgesehene Material verwendet wird.
• Hängende Lasten müssen mindestens zweimal jährlich auf Festigkeit und
Tragfähigkeit geprüft werden.
• Verwenden Sie das Produkt und alle Zubehörteile ausschließlich Produkt-
bestimmungsgemäß.
• Kinder sollten nicht unbeaufsichtigt die Leinwand nutzen, bzw. darunter spielen.
1
Faltrahmen (1) Spannseile (4)Schraube Lang (4)
Öse (2)
Bodenhering (4)
Wandwinkel (2)
Wandschraube (4)
Dübel (4)
Strebe Lang (2)
Strebe Kurz (2)
Lieferumfang
Sicherheitshinweise
Parts list
Name Picture Qty
Fold frame
1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw
8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Schraube Kurz (8)Projektionstuch (1) Imbus (1)
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Schritt 1: Falten Sie den Faltrahmen gemäß Abbildung auf.
Schritt 2: Rollen Sie das
Projektionstuch aus. Achten Sie darauf,
dass der Untergrund sauber, staubfrei
und eben ist.
Schritt 3: Legen Sie das Projektionstuch auf den aufgefalteten Rahmen. Achten Sie
darauf, dass die Projektionsseite oben auf dem Rahmen aufliegt. Legen Sie die kurzen
Seiten des Tuches in den Winkel des Faltrahmens ein (siehe Abb. 1) und schrauben Sie
alle vier Ecken mit der Schraube Kurz fest.
HINWEIS: Beginnen Sie mit einer Seite und legen das Tuch passend in den oberen und
unteren Winkel des Faltrahmens einer Seite ein. Wenn Sie die andere Seiten befestigen,
müssen Sie ggf. das Tuch gleichmäßig ziehen, damit es passend in beide Winkel der
anderen Seite passt.
2
Aufbau
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
3
Aufbau
Sobald beide Seiten in den Winkeln verschraubt sind, beginnen Sie die Druckknöpfe von
der Mitte auf beiden Seiten gleichzeitig fest zudrücken.
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Abb. 1
Leinwandtuch
Faltrahmen
Schraube kurz
Faltrahmen-Winkel
Parts list
Name Picture Qty
Fold frame 1
Screen fabric
1
Long rod
2
Short rod
2
Long screw 4
Short screw 8
Rings
2
tent peg 4
Rope 4
wrench 1
fastening
2
wall nail 4
rubber plug 4
Notice：
In order to ensure the projection effect and quality of this
product, please follow the following operating
requirements.
1. When installing, look for a size appropriate ground or
mesa, the surface wants to feel and do not have any
obstacle, had better a few clean material on mat below are
like cloth, paper skin, film, blanket, can prevent the
damage of screen fabric and frame.
2.Do not use hard or sharp objects to rub or hit the screen
and screen surface.
3.Keep children away from the screen to prevent accidental
or screen damage.
4.When cleaning the screen surface, please use soft clean
cotton cloth or brush to wipe gently.
5.In the installation process should pay attention to handle
with care, to prevent injuries and damage items.
Installation procedure:
1.Unfolded folding frame
2.Unfolded screen fabric
3.The fabric is installed on the folding frame and the
short screw is installed.
Press the button (the fabric is elastic, press the
button after the fabric can be pulled lightly)
4.Install two rings (not for indoor use)
Rings
Öse
Schritt 4: (Erforderlich bei Outdoor Einsatz)
Schrauben Sie die Ösen in die kurze Seite des
Rahmens an der vorgesehenen Stelle (gem.
Abbildung).
4
Schritt 5: (Erforderlich, wenn Leinwand freistehend und Outdoor genutzt werden soll)
Montieren Sie die die Strebe Lang auf die Strebe Kurz gemäß Abbildung. Verwenden Sie
die Schraube Kurz um ein Fußelement zusammenzubauen (es werden insgesamt zwei
Fußelemente benötigt).
Schritt 6: Verbinden Sie beide
Fußelemente rückseitig mit dem
Rahmen. Achten Sie darauf, dass
der Rahmen korrekt ausgerichtet
ist (Aufnahmepunkte für die
Fußelemente befinden sich
im unteren Rahmenbereich).
Montieren Sie mithilfe von 4x
Schraube Kurz die Fußelemente an
den Rahmen gemäß Abbildung.
Schritt 7: (Erforderlich bei Outdoor-Einsatz)
ACHTUNG: Stellen sie die Leinwand nur auf einen ebenen Untergrund auf. Dieser muss
frei von spitzen Gegenständen sein; diese könnten der Leinwand irreparable
Schäden zuführen! Nicht bei Wind verwenden, die Leinwand könnte umfallen und
beschädigt werden oder herumfliegende Teile zu schweren Personen- oder Sachschäden
führen!
Aufbau
5.Install two legs (long rod and short rod connection)
6.Legs on the stretched
fabric frame
7.Insert a root nail
Actual site selection
Choose to install in
the through hole
of cross leg
Or the outer edge
of the shelf)
（Picture A or B）
8.Ropes (not indoor)
Hanging way
1.Measure the midline distance between the two
pendants on the screen
2.Punch holes in the wall and mount the fastener
3.The screen hangs on the wall
Short
Long
Short rod
Ground
Rope
Ground
B
5.Install two legs (long rod and short rod connection)
6.Legs on the stretched
fabric frame
7.Insert a root nail
Actual site selection
Choose to install in
the through hole
of cross leg
Or the outer edge
of the shelf)
（Picture A or B）
8.Ropes (not indoor)
Hanging way
1.Measure the midline distance between the two
pendants on the screen
2.Punch holes in the wall and mount the fastener
3.The screen hangs on the wall
Short
Long
Short rod
Ground
Rope
Ground
B
Schraube Kurz
Strebe Lang
Strebe Kurz
3
Aufbau
a) Platzieren Sie die Leinwand auf einem ebenen Untergrund und richten diese so
aus, dass die Zuschauer die Leinwand gut erkennen können. Anschließend versenken
Sie pro Seite zwei Heringe vor und nach dem Fußelement (ca. 20-30cm Abstand zum
Fußelement).
5.Install two legs (long rod and short rod connection)
6.Legs on the stretched
fabric frame
7.Insert a root nail
Actual site selection
Choose to install in
the through hole
of cross leg
Or the outer edge
of the shelf)
（Picture A or B）
8.Ropes (not indoor)
Hanging way
1.Measure the midline distance between the two
pendants on the screen
2.Punch holes in the wall and mount the fastener
3.The screen hangs on the wall
Short
Long
Short rod
Ground
Rope
Ground
B
Untergrund
Hering
b) Verwenden Sie pro Seite
zwei Spannseile. Beginnen
Sie damit, zwei Seile an
einer Öse fest zu verknoten.
Anschließend führen Sie
ein Spannseil zu einem
Hering und befestigen es auf
Spannung. Achten Sie darauf,
dass ausreichend Zug auf
dem Spannseil ist. Sobald alle
vier Spannseile an allen vier
Heringen befestigt sind, kann
die Leinwand sicher im Freien
genutzt werden.
20-30 cm
5.Install two legs (long rod and short rod connection)
6.Legs on the stretched
fabric frame
7.Insert a root nail
Actual site selection
Choose to install in
the through hole
of cross leg
Or the outer edge
of the shelf)
（Picture A or B）
8.Ropes (not indoor)
Hanging way
1.Measure the midline distance between the two
pendants on the screen
2.Punch holes in the wall and mount the fastener
3.The screen hangs on the wall
Short
Long
Short rod
Ground
Rope
Ground
B
Spannseil
4
Aufbau
5.Install two legs (long rod and short rod connection)
6.Legs on the stretched
fabric frame
7.Insert a root nail
Actual site selection
Choose to install in
the through hole
of cross leg
Or the outer edge
of the shelf)
（Picture A or B）
8.Ropes (not indoor)
Hanging way
1.Measure the midline distance between the two
pendants on the screen
2.Punch holes in the wall and mount the fastener
3.The screen hangs on the wall
Short
Long
Short rod
Ground
Rope
Ground
B
5.Install two legs (long rod and short rod connection)
6.Legs on the stretched
fabric frame
7.Insert a root nail
Actual site selection
Choose to install in
the through hole
of cross leg
Or the outer edge
of the shelf)
（Picture A or B）
8.Ropes (not indoor)
Hanging way
1.Measure the midline distance between the two
pendants on the screen
2.Punch holes in the wall and mount the fastener
3.The screen hangs on the wall
Short
Long
Short rod
Ground
Rope
Ground
B
Schritt 8: (Erforderlich bei Wandmontage)
a) Messen Sie den Abstand L zwischen den beiden Wandhaken (Ausgehend von der
Mitte jedes Wandhakens).
b) Übertragen Sie den Abstand L
auf die Montagewand. Achten Sie
darauf, dass der Untergrund geeignet
ist für diese Installation und über
ausreichend Tragkraft verfügt. Bohren
Sie pro Wandaufnahme zwei passende
Löcher für die mitgelieferten Dübel
und Wandschrauben vor. Achten Sie
darauf, dass das Montagematerial für
Ihren Untergrund geeignet ist und
beschaffen Sie passendes Material,
wenn das mitgelieferte Material
ungeeignet ist.
Setzen Sie die Dübel in die vorgebohrten Löcher ein und fixieren die Wandwinkel mit
den passenden Schrauben. Überprüfen Sie die Festigkeit, bevor die Leinwand auf die
Winkel gesetzt wird.
www.celexon.de
celexon Europe GmbH, Gutenbergstraße 2, D-48282 Emsdetten
c) Heben Sie die Leinwand von oben auf die Wandwinkel auf. Sobald Sie sicherstellen
können, dass beide Haken auf den Winkeln sicher sitzen, können Sie langsam die
Leinwand lösen. Die Installation ist damit beendet.
Aufbau
5.Install two legs (long rod and short rod connection)
6.Legs on the stretched
fabric frame
7.Insert a root nail
Actual site selection
Choose to install in
the through hole
of cross leg
Or the outer edge
of the shelf)
（Picture A or B）
8.Ropes (not indoor)
Hanging way
1.Measure the midline distance between the two
pendants on the screen
2.Punch holes in the wall and mount the fastener
3.The screen hangs on the wall
Short
Long
Short rod
Ground
Rope
Ground
B
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Celexon basic line Faltrahmenleinwand 16:9, 80" Owner's manual
- Category
- Projection screens
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
Other documents
-
EuroLite TRIPOD SCREEN User manual
-
-
TaoTronics TT-HP020 Installation guide
-
Avtek International 1EVF13 User manual
-
SECOMP AG 05452219 Screenint Leinwand Canaletto 250×140 16:9 User manual
-
Epson ELPSC26 User manual
-
Projecta Slimscreen Specification
-
Medium EasyFixx Comfort, 200 x 113 cm User manual
-
-
VonHaus 3000125 User manual
